Étude des Interactions du Zinc et de l'Or dans l'Étain Liquide

Abstract

Les auteurs ont étudié par voie électroehimique l'influence de faibles additions d'or sur les propriétés thermodynamiques du zinc en solution diluée dans l'étain fondu. Le paramètre d'interaction de Wagner ?_Zn ^Au et sa variation avec la température ont été déterminés dans l'intervalle de température 420–650°C: ?_Zn ^Au = 2.71 – 5.92. 10³/T.     

First and second coordination spheres in 8-azaxanthinato salts of divalent metal aquacomplexes – Ab initio and DFT study

The hydrogen bonding pattern in complexes of the type [M²⁺(H₂O)₆](dmax)₂ (M = Mn, Ni, Co, Zn, Cd, Hdmax = 1,3-dimethyl-8-azaxanthine), [M²⁺(H₂O)₄(py)₂](dmax)₂ (M = Mn, Co, Zn, Cd, py = pyridine) and [M²⁺(dmax)₂(H₂O)₂(py)₂]·2H₂O (M = Ni, Cu) were studied by ab initio (MP2/LANL2DZ//B3LYP/LANL2DZ) and density functional theory methods (B3LYP/LANL2DZ, B3LYP/6-31G^∗∗ and B3PW91/6-31G^∗∗). The investigation includes a variety of theoretical analyses, which include interaction energy, many body analyses, electron density analysis, topological analysis, Mulliken atomic charges, natural atomic charges and harmonic vibrational analysis. The geometrical parameters and vibrational frequencies of dmax (the mono anion of 1,3-dimethyl-8-azaxanthine), [M²⁺(H₂O)₆] (M = Mn, Ni, Co, Zn, Cd), [M²⁺(H₂O)₄·(py)₂] (M = Mn, Co, Zn, Cd) and the complexes, calculated by the theoretical methods, were compared with the recent X-ray crystallographic results and it was observed that the results are found to agree well with the crystallographic results. The present calculations provide an important physicochemical insight into metal cations with 1,3-dimethyl-8-azaxanthine. The results also reveal the active role of coordinated water molecules in modulating the binding of the cation through a specific network of hydrogen bonds. The topology of the motifs generated by these hydrogen bonds has been characterized, adapting to the second coordination sphere concepts usually applied to the first (monodentate, chelate, and bridge) coordination sphere. The optimized structures of the Cd²⁺, Zn²⁺ and Cu²⁺ complexes further interact among themselves in a less tight fashion to generate three dimensional structures (a tape-like hydrogen bond network). Finally these tape-like hydrogen bond network were optimized using the B3LYP/LANL2DZ basis set.     

骨架结构多孔TiO2薄膜增强染料敏化太阳能电池性能

以空心球状TiO₂为基体、以片状TiO₂为骨架,采用刮刀法制备了染料敏化太阳能电池的多孔TiO₂光阳极薄膜。光电转化效率测试结果表明,当作为骨架支撑材料的片状TiO₂含量为20wt%时,光阳极薄膜组装成太阳能电池的光电转化效率达到最高值4.53%,比商业P25制备的无孔无骨架TiO₂薄膜电池(4.06%)及无骨架结构的多孔TiO₂薄膜电池(4.17%)的性能均有显著提高。当片状TiO₂的最佳含量为20wt%电池薄膜厚度为33 μm时,太阳能电池光电转化效率进一步提升为7.06%。光电性能增强的原因是骨架结构有利于快速传输电子并增大染料吸附量。本研究通过设计制备具有骨架结构的多孔TiO₂薄膜为提高染料敏化太阳能电池性能提供了新的思路。     

Approximate analytic expressions for the diffusiophoretic velocity of a spherical colloidal particle

The general expression is derived for the diffusiophoretic velocity of a spherical colloidal particle of radius a in a concentration gradient of symmetrical electrolyte. On the basis of this expression, simple approximate analytic expressions for the diffusiophoretic velocity correct up to the order of 1/κa is derived, where κ is the Debye-Hückel parameter. It is found that the approximate expression correct to order unity can be applied for κa ≥ 50 with negligible errors, while the approximate expression correct to order 1/κa can be applied for κa ≥ 20 with negligible errors.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

Synthesis and Characterization of Ag8(Ge1−x,Snx)(S6−y,Sey) Colloidal Nanocrystals

A facile colloidal approach to synthesize Ag₈(Ge_1?x,Sn_x)(S_6?y,Se_y) nanocrystals (NCs) in a highly controlled way across the entire compositional ranges (0≤x≤1, 0≤y≤6) has been developed. The NCs exhibit a uniform size distribution, highly crystalline structure, over 1 g scalable synthesis, and tunable band gaps in the range of 0.88–1.45 eV by varying their chemical compositions. The Ag₈GeS₆ NCs with a band gap of approximately 1.45 eV were employed as a model light harvester to assess their applicability in solar cells by a full solution‐processing device, yielding an efficiency of 0.28 % under AM1.5 illumination, demonstrating their application potential in solar energy utilization.     

Higher‐Dimensional Unification with continuous and fuzzy coset spaces as extra dimensions

We first review the Coset Space Dimensional Reduction (CSDR) programme and present the best model constructed so far based on the , 10‐dimensional E₈ gauge theory reduced over the nearly‐Kähler manifold with the additional use of the Wilson flux mechanism. Then we present the corresponding programme in the case that the extra dimensions are considered to be fuzzy coset spaces and the best model that has been constructed in this framework too. In both cases the best model appears to be the trinification GUT .     

Application of solvent evaporation technique for pure drug crystal spheres preparation

An innovative application of the solvent evaporation technique was suggested. Solvent evaporation technique is a technique for drug encapsulation and nanosphere preparation. The widely used technique is also facing the problem of low actual drug entrapment percent, which is not economic from the industrial view. The goal of this work is trying to use the advantage of this technique concerning the product sphericity and the ability to control particle size, to prepare a drug as pure crystals spheres. Ibuprofen is selected as a model drug. The spheres are formed by using Polyvinyl pyrrolidone (PVP) or Polyethylene glycol (PEG) as an anti-aggregating agent but not formed on using tween or span. Particle size and actual drug content depend on the concentrations the anti-aggregating agent used. Surfaces of the drug crystal spheres are porous with empty sphere internal structure on using PVP but spongy and rough on using PEG. The drug has its identity chemical form in the drug crystal spheres. IR scan of spheres prepared on using PEG showed a characteristic ether peak. DSC showed melting endothermic peak of PEG, but X-ray showed minor change in the drug crystal patterns. Drug release profiles from crystal spheres prepared with the same anti-aggregating agent are close to each other. The drug release profiles from drug crystal spheres prepared by using PEG are more controlled than that prepared by using PVP. The drug release mechanism is diffusion. It was concluded that, the same technique could be suggested for preparation of other biomedical material in pure crystals spheres with controlled particle size. These properties may encourage to prepare very small particles with spherical shape for inhalation or injection as an innovative particle technology application for the widely used technique.     

The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2

Zinc chloride and potassium oxalate are often applied as activating agents for carbon materials. In this work, we present the preparation of ZnO/carbon spheres composites using resorcinol-formaldehyde resin as a carbon source in a solvothermal reactor heated with microwaves. Zinc chloride as a zinc oxide source and potassium oxalate as an activating agent were applied. The effect of their addition and preparation conditions on the adsorption properties towards carbon dioxide at 0 °C and 25 °C were investigated. Additionally, for all tested sorbents, the CO₂ sorption tests at 40 °C, carried out utilizing a thermobalance, confirmed the trend of sorption capacity measured at 0 and 25 °C. Furthermore, the sample activated using potassium oxalate and modified using zinc chloride (a carbon-to-zinc ratio equal to 10:1) displayed not only a high CO₂ adsorption capacity (2.69 mmol CO₂/g at 40 °C) but also exhibited a stable performance during the consecutive multicycle adsorption–desorption process.