环状高分子对胶体稳定性影响的理论研究

将改进的基本度量理论与热力学微扰理论相结合,提出了胶体/高分子系统排空相互作用的IRDFT理论。该理论解释了在实际胶体系统中起重要作用的排斥体积效应和高分子链内相关性的竞争机制。应用该IRDFT,分别以线性链状和环状结构的高分子及其单体为排空元,计算了不同排空元条件下的胶体间排空相互作用。研究表明:对于絮凝破坏,自由环状高分子具有更大的优势。     

Sedimentation and drying dissipative structures of colloidal silica (1.2 μm in diameter) suspensions in a glass dish and a polystyrene dish

Sedimentation and drying dissipative structural patterns formed in the course of drying colloidal silica spheres (1.2 μm in diameter) in aqueous suspension have been studied in a glass dish and a polystyrene dish. The broad ring patterns are formed within a short time in suspension state by the convection flow of water and colloidal spheres. The broad ring patterns are not formed when a dish is covered with a cap, which demonstrates the important role of the convectional flow of silica spheres and water accompanied with the evaporation of water on the air-suspension interface. The sedimentary spheres always move by the convectional flow of water, and the broad ring patterns became sharp with time. Broad ring and microscopic fine structures are formed in the solidification processes on the bases of the convectional and sedimentation patterns. Drying patterns of the colloidal suspensions containing sodium chloride are star-like ones, which strongly supports the synchronous cooperative interactions between the salt and colloidal spheres.     

胶体金在DNA分子识别中的应用——胶体金对罗丹明B与单双链DNA识别作用的影响

通过研究罗丹明B与单双链DNA作用过程中，胶体金加入前后的紫外可见吸收光谱的变化，发现在胶体金加入的前后，罗丹明B均以沟槽方式与单双链DNA相作用；胶体金的加入可以较大程度地增大化合物与DNA之间的相互作用．     

Sol-Gel Routes to Zeolite Membranes and Thin Films

The synthesis of zeolite membranes and thin films using the secondary growth process is briefly described. In this process colloidal zeolite particles (sols) are prepared hydrothermally and then subsequently deposited on substrates to produce uniform layers of controlled thickness, as illustrated with silicalite and zeolite-A. The formation and growth of the zeolite sols has been investigated in situ by small angle neutron scattering (SANS). SANS measurements on silicalite sols at progressively higher concentrations have provided details of the colloid interactions which lead to zeolite gel-layer structures which are uniform and free of defects.     

CdS nanoclusters stabilized by thiolate ligands: A mini-review

One of the most exciting frontiers in materials chemistry in recent years is the optoelectronics of quantum-confined semiconductor nanoclusters. These nanoclusters are 10–200 A in diameter, and in this size regime exhibit extra-ordinarily interesting quantum mechanical effects. Cadmium sulfide is a popular semiconductor for these studies, and reviewed here is the synthesis and charac-terization of such CdS nanoclusters, with emphasis on how chemical control of the surface by thiolates influences product formation and properties. Also described are the syntheses and structures of true molecular clusters of CdS capped with thiolate ligands.     

Glass capillary gas chromatography of amino acid enantiomers

Glass capillaries coated with Chirasil-Val, a chirally functionalised polysiloxane, are capable in principle of resolving all protein amino-acid enantiomers in a single run and within a short analysis time, thus allowing for example the quantitative amino acid determination by enantiomer labelling. The elution characteristics of the individual amino acids however are also dependent upon the chemical nature of the capillary wall surface, and a surface pretreatment is found to be necessary if all protein amino acids are to be analysed. Of the various methods of pretreatment tested, etching of borosilicate glass with gaseous HCl followed by deposition of colloidal silicic acid is considered to be the most suitable.     

Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.     

Polylactide hollow spheres fabricated by interfacial polymerization in an oil-in-water emulsion system

A one-step pathway has been adopted to fabricate biodegradable polylactide (PLA) hollow spheres by interfacial polymerization in an oil-in-water emulsion system. The mechanism of sphere formation is suggested with respect to interfacial cross-linking polymerization and subsequent precipitation of the unreacted PLA macromonomers onto the preformed shells. Their hollow nature and morphology were verified by transmission electron microscopy and scanning electron microscope characterizations.     

Specific features of luminescence of Q-CdS colloids with different sizes

The specific features of luminescence of colloidal solutions of Q-CdS with particles of different size and the regularities of luminescence quenching by quenchers of various nature were studied. The luminescence spectra of Q-CdS consist of several bands, which are shifted to the long-ware region as the particle size increases. The dependence of the integral quantum yield of luminescence on the particle size has a sharp maximum at a particle diameter of ?23Å. A Stem—Volmer-type equation including the adsorption isotherm of the quencher molecules on the surface of the Q-CdS colloidal particles was used to describe the regularities of luminescence quenching of Q-CdS colloidal solutions. The CdS particle size was found to affect the efficiency of luminescence quenching. The regularities of luminescence quenching depend both on the rate constant of electron transfer to the quencher molecules and on the ability of the quencher molecules to be adsorbed on the surface of the CdS colloidal particle.     

聚苯乙烯乳胶球三维有序体的制备及其显微形貌表征

A three-dimensional (3D) ordered structure was achieved by self-organization of monodisperse polystyrene latex about 250nm in diameter after being ambient dried. The stacked morphology was investigated by scanning electron microscopy(SEM) observation. It is shown that the face-centered cubic(FCC) phase dominantly exists. This finding presents a potential template for preparing an inverse FCC structure as a photonic crystal of full band gap if the index contrast is higher than 2.8.