Deposition of boron nitride on graphite at 1300 K

A method for the deposition of BN onto graphite and other substrates is described. Boron trichloride (BCl₃) and ammonia (NH₃) diluted with Ar were used as reacting gases. The deposition process was carried out at 1300 K as well as lower temperatures in an open system at pressures of 1 atm. The consequences of the introduction of hydrogen to the system were considered. It was demonstrated that the replacement of argon with hydrogen increases the efficiency of the process as well as the theoretical rate of BN deposition. However, the acceleration of the deposition seems to be unprofitable, because the resulting supersaturation leads to the formation of an amorphous phase. The modification of the experimental conditions were proposed.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Transesterification of an RNA model in buffer solutions in H2O and D2O

Transesterification of a phosphodiester bond of RNA models has been studied in various buffer solutions, under neutral and slightly alkaline conditions in H₂O and D₂O. The results show that imidazole is the only buffer system where a clear buffer catalysis on the cleavage of a phosphodiester bond is observed. The rate enhancement in sulphonic acid buffers is smaller, and a sulphonate base, particularly, is inactive as a catalyst. The rate‐enhancing effect of imidazole is, however, catalytic, and the catalytic inactivity of sulphonate buffers can be attributed to their structure and/or charge. The catalysis by imidazole is a complex system which, in addition to first‐order reactions, involves a process that shows a second‐order dependence in imidazole concentration. The latter reaction becomes significant in acidic imidazole buffers (pH < pK_a), as the buffer concentration increases. The kinetic solvent deuterium isotope effect k_H/k_D, referring to first‐order catalysis by imidazole base, is 2.3 ± 0.3. That referring to second‐order catalysis is most probably much larger, but an accurate value could not be obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Arenesulfonylimines of methyl trifluoropyruvate in the cyclocondensation reactions with 1,3-C,N-and-N,N-binucleophiles

Reaction of arenesulfonylimines of methyl trifluoropyruvate with 1,3-C,N-and-N,N-binucleophiles led to a variety of N-sulfonylated fluorine-containing heterocycles, including the fused ones. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2171–2175, November, 2007.     

巴旦杏中脂肪酸的测定

采用气相色谱仪进行定量分析，气－联质联用仪进行定性分析，巴旦杏中脂肪酸进行了测定，并探讨了样品处理方法和气－质联用仪的分析条件，得到了较为满意的分析结果。     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Studies on the Synthesis and Properties of K_8[TiP_2W_17O_62]·12H_2O

The present paper covers a salt of 2:18 heteropoly complex of tungstotitanophosphate prepared with the method of improved sequence preparation. The title compound was characterized by elemental analysis, 31P NMR spectra, polarography, cyclic voltammetry, IR, UV, X-ray powder diffraction , X-ray photoelectron spectra and TG-DTA analysis. The results show that the complex with the formula K8[TiP2W17O62]·12H2O has Dawson structure. Its properties such as spectra, redox behavior and thermal stability are discussed.     

Radical Couplings as Key Steps for the Preparation of Derivatives of Nonactic Acid

Summary. Free radical couplings from furan, as cheap starting material, were studied in view of developing a rapid strategy en route to the synthesis of derivatives of nonactin. The chain containing the alcohol function was introduced in one or two steps in 86% yield. For the introduction of the second chain with the ester function two different coupling methods were tested. Starting from the advanced intermediates obtained nonactin derivatives can be prepared by catalytic hydrogenation of the furan ring.     

Studies on O-,N-Acylation of 3-Hydroxyisoxazole and Their Regioselective Synthesis(Ⅰ)——O-,N-acylation of 5-Methyl-3-hydroxyisoxazole with 2,2-Dimethyl 3-Substituted Cyclopropanecarboxylic Chlorides

The reactions of 5-methyl-3-hydroxyisoxazole with 2, 2-dimethyl, 3-substituted cyclopropanecarboxylic chlorides give O-acyl-5-methyl-3-hydroxyisoxazole and N-acyl-5-methylisoxazolin-3-one derivatives. The ratio of O-acyl to N-acyl product depends upon the acylation reagents. O-acyl derivatives can be converted to the N-acyl compounds by isomerization under acidic conditions or heating.     

Optimization of lantadenes isolation and preparation of 22 β-hydroxyoleanonic acid

The lantadenes fraction from Lantana camara was isolated and transformed to the medicinally important intermediate 22β-hydroxyoleanonic acid. The compound was studied for hepatotoxicity using lantadene A as standard and found to be nontoxic. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 357–358, July–August, 2006.     

Deposition conditions in tailoring the morphology of highly porous reticular films prepared by electrostatic spray deposition (ESD) technique

Spongy-like reticular structure is a unique morphology fabricated by electrostatic spray deposition (ESD) technique. The effects of solvent, substrate temperature, precursor feeding rate, static electric field strength, and deposition time on tailoring the reticular structure were investigated. Scanning electron microscopy was used to observe the film morphology. MnO_x or LiMn₂O₄ were selected as the model materials. It is found that in addition to the conventional solvent butyl carbitol, other kinds of solvents such as ethylene glycol and propylene glycol can also be used to obtain reticular films at a suitable substrate temperature. Porous films with a low cross-linking degree pore structure can be prepared by increasing precursor feeding rate or decreasing substrate temperature. Increasing the deposition time or the electric field strength helps to obtain reticular films with more homogeneous pore size distribution. In addition, the addition of a high boiling-point solvent in mixed alcohol solvent results in the increase of proper substrate temperature. It is concluded that the fluidity of the spray droplets on the surface of a hot substrate is an important factor to form a reticular film.