Simultaneous quantification of ten Amadori compounds in tobacco using liquid chromatography with tandem mass spectrometry

Amadori compounds are aroma precursors formed in the initial phase of the Maillard reaction. Based on their similar structures, simultaneous quantification of more than six Amadori compounds in tobacco has not been reported yet. In this study, a simple and rapid method was developed to simultaneously quantify ten Amadori compounds including the isomers of Fructose‐isoleucine and Fructose‐leucine in tobacco. The separation was performed on an Atlantis T₃ column (2.1 × 250 mm, 5 μm) by gradient elution using acetonitrile and water as the mobile phases. The quantification method was systematically evaluated and proven to be sensitive and accurate. The linearity was good, with correlation coefficients of 0.9977–0.9999. The limits of detection and quantitation were 1.354–2.532 and 4.516–8.444 ng/mL, respectively. The recoveries were 84.0–119.6%, and the relative standard deviations were 1.33–5.40%. The method was used to analyze the changes in the amounts of ten Amadori compounds in tobacco before and after tobacco primary processing. The analysis shows that the Maillard reaction occurs during the short processing period.     

Evaluation of Formaldehyde in Foundry Waste Sands Using Liquid Chromatography

Abstract

The industrial manufacturing of metallic objects results in a high level of foundry waste sands that may contain toxic compounds such as formaldehyde. The formaldehyde content of foundry waste sands was evaluated by liquid chromatography. Samples were collected during various steps of the industrial processes. Results showed that the phenolic alkaline process generated waste sands with higher formaldehyde content than the furanic process; the highest value was 7.6 × 10^?3% (w/w). In this work, formaldehyde content decreased with time in all of the samples studied, revealing that most formaldehyde was released to the occupational environment.     

Efficient syntheses of zoledronic acid as an active ingredient of a drug against osteoporosis

The reaction of 1H-imidazol-1-ylacetic acid and two equivalents of phosphorus trichloride/phosphorous acid at 75?°C in sulfolane, or in the presence of catalytic amounts of [bmim][BF₄] afforded zoledronic acid in yields up to 75%. The joint use of the ionic liquid additive and sulfolane as the solvent was synergetic affording highly valuable zoledronic acid in a record yield of 93%.     

Combined use of ionic liquid and β‐CD for enantioseparation of 12 pharmaceuticals using CE

In this study, the enantioseparation of zopiclone, repaglinide, chlorphenamine maleate, brompheniramine maleate, dioxopromethazine hydrochloride, promethazine hydrochloride, liarozole, carvedilol, homatropine hydrobromide, homatropine methylbromide, venlafaxine, and sibutramine hydrochloride has been investigated using β‐CD in combination with a chiral ionic liquid (IL), 1‐ethyl‐3‐methylimidazolium‐L‐lactate. The influence of the type of IL and its concentration, BGE pH, and chain length of the IL cations on the resolution are discussed. Finally, the proposed method was successfully applied for the chiral impurity determination of eszopiclone in pharmaceutical tablets after validation with respect to accuracy and precision, linearity range, selectivity, repeatability, LOD and LOQ. It is assessed that the chiral impurity determination in the commercial tables is fewer than 0.1%.     

Ultra high performance liquid chromatography coupled with electrospray ionization/quadrupole time‐of‐flight mass spectrometry for the rapid analysis of constituents in the traditional Chinese medicine formula Wu Ji Bai Feng Pill

An ultra high performance liquid chromatography coupled with electrospray ionization quadrupole time‐of‐flight mass spectrometry method in both positive and negative ion modes was established in order to comprehensively investigate the major constituents in Wu Ji Bai Feng Pill. Briefly, a Waters ACQUITY UPLC HSS C₁₈ column was used to separate the aqueous extract of Wu Ji Bai Feng Pill. A total of 0.1% formic acid in acetonitrile and 0.1% aqueous formic acid v/v were used as the mobile phase. All analytes were determined using quadrupole time‐of‐flight mass spectrometry with electrospray ionization source in positive and negative ion modes. At length, a total of 173 components including flavones and their glycosides, monoterpene glycosides, triterpene saponins, phenethylalchohol glycosides, iridoid glycosides, phthalides, tanshinones, phenolic acids, sesquiterpenoids and cyclopeptides were identified or tentatively characterized in Wu Ji Bai Feng Pill in an analysis of 16.0 min based on the accurate mass and tandem mass spectrometry behaviors. The developed method is rapid and highly sensitive to characterize the chemical constituents of Wu Ji Bai Feng Pill, which could not only be used for chemical standardization and quality control of Wu Ji Bai Feng Pill, but also be helpful for further study in vivo metabolism of Wu Ji Bai Feng Pill.     

Dielectric properties of selected laterally fluoro-substituted 4,4′′-dialkyl,dialkoxy and alkyl-alkoxy [1:1′;4′:1′′]terphenyls

Measurements of the complex permittivity, ε*?=?ε′ – iε″, within the frequency range 200 Hz to 10 MHz for 15 laterally fluoro-substituted terphenyls have been conducted. In most cases the substances exhibited the nematic phase over a broad temperature range. All substances were characterised by negative dielectric anisotropy, and are potentially useful for vertical alignment mode systems. The static permittivity tensor components have been analysed in relation to the dipole structure of the molecules. Dielectric relaxation processes observed in the liquid crystalline (LC) and solid rotator (R) phases (obtained by slow cooling of the samples) are characterised by calculation of the relaxation times and activation barriers. The rotation motions around the short axes are typical for LC phases, whereas rotations about the long axes, accompanied in some cases by internal motions, are present in the R phase.     

Siloxane polymers containing azo moieties synthesized by click chemistry for photo responsive and liquid crystalline applications

Three new types of siloxane‐based photoactive liquid crystalline polymers containing azo side groups were synthesized through the click chemistry route. The polymers having molecular weight range of 14,000–34,000 g mol^?1 were soluble in most of the polar solvents like chloroform, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, and dichloromethane. The photoresponsive trans–cis photoisomerization under UV radiation and cis–trans relaxation process in dark for the polymers were studied. The isomerization rate constants were found to be 0.01–0.04 sec^?1 and 1.16*10^?4–4.67*10^?4 sec^?1, respectively. It has been noted that the polymers showed high intensity absorption for n‐π* in chloroform. Both trans and cis forms of azide monomers having azo moiety exhibited molar extinction coefficient ( ? _max) in the range of 22,000–33,000 L mol^?1 cm^?1. The thermotropic behavior of the polymers was studied by polarizing optical microscope (POM) and differential scanning calorimetry (DSC) experiments. Polymer P1 showed liquid crystalline textures of nematic droplets, whereas P2 showed smectic focal conic texture and nematic droplets. Polymer P1 was also studied for photomechanical bending on exposure to UV radiation. The polymers showed initial degradation temperature in the range of 210–275°C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Twin liquid crystals and segmented thermotropic polyesters containing azobenzene—effect of spacer length on LC properties

We report systematic studies on a homologous series of twin liquid crystalline (LC) molecules based on phenyl and naphthyl azobenzene ( PnP and NpnNp ) as well as segmented copolyesters based on them. The twin series had the structure azobenzene–oligooxyethylene–azobenzene, where the ethyleneoxy length was varied from 2 to 6 units. The LC properties of the twin series depended on the chemical structure of the azochromophore and also the length of the central oligooxyethylene segment. The PnP series exhibited smectic LC properties for n > three oligooxyethylene units. Conversely, NpnNp series exhibited spherulitic phases only for the shortest member – Np2Np . One non‐LC short spacer twin ( P2P ) and one LC long spacer twin ( P6P ) were incorporated as part of a main chain polyester composed of fully aliphatic segments of sebacate and di or tetraethylene glycol (DEG/TEG) units by melt polycondensation. Non‐LC P2P formed LC polymers even at low (5 mol %) incorporation in DEG‐based copolymers, whereas the LC‐ P6P could do so only at 30 mol % incorporation. The LC properties of the twin molecules as well as copolymers were studied using differential scanning calorimetry, polarized light microscopy (PLM) along with variable temperature wide angle X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Size control of phase‐separated liquid crystal droplets in a polymer matrix based on the phase diagram

When a mixture of liquid crystal (LC) and photo reactive monomer is irradiated by UV light, polymerization occurs and LC droplets form through phase separation, producing polymer dispersed LCs (PDLCs). Although size control of LC droplets and reduced amounts of LC in PDLC films are important in applications, precise size control of LC droplets at a low LC fraction has not yet been accomplished. In this study, the phase diagrams of the LC/initial monomer and the LC/polymer during polymerization were used to control LC droplet size at various LC fractions. Both the relative position of the sample in the initial phase diagram and the shift of the phase separation line during polymerization were shown to be important in determining the size of LC droplets. Our results are expected to provide a new strategy for precise size control of LC droplets especially at a low LC fraction range, which would be a great help for PDLC applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012