配位聚合物{[MnL][FeⅡFeⅢ(ox)3·1.5H2O]}∞的合成及其磁学性质

合成和表征了一种新的Schiff碱配合物MnL(ClO4)*3H2O(1)(其中L为n(水杨醛)∶n(二乙撑三胺)=1∶1缩合而成的Schiff碱).1与FeSO4*7H2O和K3[Fe(ox)3]*3H2O(ox=oxalate)进一步反应,生成了双金属层状配位聚合物{[MnL][FeⅡFeⅢ(ox)3]*1.5H2O}∞(2).IR和Mssbauer谱测定结果表明,2具有二维层状结构,其阴离子层由[FeⅡFeⅢ(ox)3]-单元构成.变温磁化率(5K～100K)测试结果表明,2中的自旋载体之间存在反铁磁交换作用.5K时的磁滞现象表明2在低温时可能存在铁磁有序,这可能是亚铁磁或自旋倾斜造成的.     

Synthesis, band structure, and optical properties of Ba2ZnV2O8

A novel compound Ba₂ZnV₂O₈ has been synthesized in high temperature solution reaction and its crystal structure has been characterized by means of single crystal X-ray diffraction analysis. It crystallizes in monoclinic system and belongs to space group P2₁/c with a=7.9050(16), b=16.149(3), , β=90.49(3). It builds up from 1-D branchy chains of [ZnV₂O₈⁴⁻]_∞, and the Ba²⁺ cations are located in the space among these chains. The IR spectrum, ultraviolet-visible diffuse reflection integral spectrum and fluorescent spectra of this compound have been investigated. The calculated results of energy band structure by the density functional theory method show that the solid-state compound of Ba₂ZnV₂O₈ is an insulator with direct band gap of 3.48 eV. The calculated total and partial density of states indicate that the top valence bands are contributions from the mixings of O-2p, V-3d, and Zn-3d states and low conduction bands mostly originate from unoccupied antibonding states between the V-3d and O-2p states. The V-O bonds are mostly covalence characters and Zn-O bonds are mostly ionic interactions, and the ionic interaction strength is stronger between the Ba-O than between the Zn-O. The refractive index of n_x, n_y, and n_z is estimated to be 1.7453, 1.7469, and 1.7126, respectively, at wavelength of 1060 nm for Ba₂ZnV₂O₈ crystal.     

The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.     

Circular dichroism of sesquiterpene-umbelliferone ethers and structure elucidation of a new derivative isolated from the gum resin “Asa Foetida”

The CD spectra of 16 naturally occurring sesquiterpene-umbelliferone ethers, including the complete set of farnesiferol A isomers with all acetates and 6-oxoderivatives, are reported over the significant wavelength range of 350–200 nm. 11 compounds were isolated from an Asa Foetida sample and 5 further derivatives, already known as natural products, were obtained by acetylation orJones oxidation. In addition, a new compound — kamolonol (14) — was isolated. Its structure is characterized by twofold methyl migration in the drimenol derived sesquiterpene moiety.¹H-NMR, MS, IR, UV, and CD data of the new compound are discussed.Herrn Prof. Dr.K. Schlögl mit den besten Wünschen zum 60. Geburtstag gewidmet.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

Mechanical properties of twist grain boundaries in Cu

In a previous paper we studied the Young's and shear modulus of a high-angle twist grain boundary (5) in Cu, using the EAM, and related it to the uniaxial strain derivatives of single crystals. In this paper, we discuss elastic properties of ten additional twist grain boundaries, from 8.8–43.6°. The monolayer Young's modulus at each boundary was calculated and found to be 20–50% higher than the bulk value for all eleven boundaries for both csl and type1 structures. The monolayer shear modulus at each boundary was calculated and found to be 93–98% lower than the bulk value for six grain boundaries with csl structure and found to decrease with increasing twist angle. The critical shear stress was also calculated for eleven boundaries with csl structure and found to roughly decrease with increasing twist angle.     

Characterizations of Kadec-Klee properties in symmetric spaces of measurable functions

We present several characterizations of Kadec-Klee properties in symmetric function spaces on the half-line, based on the -functional of J. Peetre. In addition to the usual Kadec-Klee property, we study those symmetric spaces for which sequential convergence in measure (respectively, local convergence in measure) on the unit sphere coincides with norm convergence.

     

Correlations between topological features and physicochemical properties of molecules

The article reviews in brief, thede novo group additivity approach and, at length, the different topological approaches to obtain predictive and internally consistent correlations between various properties and structural features of molecules. The stress has mainly been on the molecular connectivity method. A new rational scheme for nomenclature of connectivity indices of different orders and types is introduced. The concept of the perturbation connectivity parameter developed by us recently has been applied to obtain correlations for molar refraction, boiling point, molar volume, heat of atomisation, heat of combustion, heat of vaporisation, magnetic susceptibility and critical constants of alkanes, alcohols and alkylbenzenes. A comparative study of various approaches reveals that the present perturbation topological approach has an edge over other similar methods.     

New homochiralortho-palladated matrix bearing a bulky substituent at the carbon stereocenter

A new homochiral dimericortho-palladated complex bearing a bulkytert-butyl substituent at the carbon stereocenter was synthesized from optically activeN,N-dimethyl-α-tert-butylbenzylamine. Regioselective activation of only the aromatic C−H bond was shown to occur during the cyclometallation process proceeding under very mild conditions due to steric effects. Spectral characteristics of mononuclear derivatives of the new dimeric complex indicate that the five-membered palladacycle exists predominantly in one of two possible chiral conformations with the axial position of thetert-butyl substituent. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1375–1384, July, 1997.