八—4—(四氢糠氧基)双酞菁衍生物钕(Ⅲ)、铕(Ⅲ)的合成和LB膜的气敏性

八—４—（四氢糠氧基）双酞菁衍生物钕（Ⅲ）、铕（Ⅲ）的合成和ＬＢ膜的气敏性张引＊辛春梅王丹（吉林省教育学院化学系，长春１３００２２）梁冰洁＊＊陈文启席时权（中科院长春应用化学研究所，长春１３００２２）关键词：希土双酞菁衍生物ＬＢ膜气敏性荧光性紫外可见...     

氧化锌脱硫中氢和氧的双气氛效应及动力学研究

用热重法研究了氧化锌脱硫中氢氧的气氛效应以及氢氧共同存在下氧化锌脱硫的微观动力学行为。实验温区为200 ℃～320 ℃，氧化锌粒度为100目～120目。研究结果表明，在0%～40%的体积浓度范围内，氢可促进脱硫反应进行；氧则由于会引起氧化锌表面析硫使得脱硫过程随其浓度的变化复杂化。氢氧双气氛下，氧化锌脱硫动力学行为可用改良收缩核模型进行描述，表面反应活化能和固体扩散活化能分别为14.96 kJ/mol和46.77 kJ/mol。     

气相色谱法研究配位化合物的热稳定性——ⅩⅢ.普鲁士蓝化合物的热分解及其加氢反应研究

普鲁士蓝化合物的热分解过程,可分为三个阶段:(1)脱水;(2)Fe³⁺还原至Fe²⁺;(3)C≡N^-键的断裂。H₂气中的热分解由于发生了一系列的加氢反应,分解产物及所对应的分解温度都不同于He气中的情况,其产物的种类增加,C≡N^-键的断裂温度降低。普鲁士蓝化合物中,CN^-呈典型的双端基配位,可看作是一种双金属配位的活化模型,与CN^-呈单端基配位的K₃[Fe(CN)₆]相比,C≡N^-键的活化程度增加,不仅断裂温度降低,且能发生更深度的加氢反应。     

Nanostructural Approach to Proton Ordering in Gas Hydrate Cages

A nanostructural approach to analysis of proton ordering in gas hydrate cages has been worked out within the framework of the topological model of strong and weak H-bonds. The approach involves rejection of the periodic boundary conditions, decomposition of the H-bond net into spherical layers, and two-dimensional drawing of the structure of spherical (spheroidal) fragments in the form of conjugate Schlegel diagrams. To analyze proton ordering in the spherical fragments composed of gas hydrate voids, we used the simulated annealing procedure and the correlation extension method proposed earlier.     

Novel Fabrication of Conductive Polymers Contained Micro‐Array Gas Sensitive Films Using A Micromanipulation Method

A novel method for fabricating a micro gas sensor film on an indium tin oxide (ITO) electrode patterned using micro‐machining technology was developed. A micromanipulation system equipped with a counter electrode (Au; Ø10 μm) and a microsyringe, which was connected to a microinjection system, was first constructed. With this system, micro gas sensor arrays could be successfully prepared on ITO electrodes. Two kinds of micro gas sensor films were prepared, based on polythiophene (PTh) and poly(3‐n‐dodecylthiophene) (PD). The response behavior of conventional PTh and micro‐PTh films against NH₃ at three different operating temperatures (25, 40 and 60 °C) was investigated by measuring the resistance of the film. With the micro‐PTh film, a reversible response was observed against NH₃ when measured at 40 and 60 °C. In addition, the responsive characteristics of the microsensor films against different testing gases were examined at the three operating temperatures. The resistance of the microsensor films of PTh and PD changed considerably, depending on the type of testing gas, allowing these sensor films to be used for the detection of various gases. Furthermore, the microsensor films had a high stability compared with conventional films prepared from the same polymer.     

Identification of irradiated foods by monitoring radiolytically produced hydrocarbons

Many countries allow the treatment of foods with low doses of ionizing radiation to reduce microbial and insect infestations, inhibit maturation, and extend shelf life. Therefore, a reliable method is needed to identify irradiated foods and to determine their compliance with respect to allowable absorbed radiation dose. Several approaches for the identification of irradiated foods have been developed such as measurement of radiolytic products, chemiluminescence, and thermoluminescence, and the use of electron spin resonance spectroscopy to measure free radicals trapped in bone. A method for the determination of radiolytically produced hydrocarbons was developed in our laboratory to evaluate the utility of monitoring these compounds as indicators of food irradiation. The method involves the extraction of the radiolytic hydrocarbons from foods and their quantitation by gas chromatography. Concentrations of the radiolytically produced hydrocarbons increased linearly with radiation doses ranging from 0 to 6 kGy. The limit of detection appears to be approximately 1 kGy. The method was found to be useful for the identification of gamma-irradiated foods such as shrimp, frog legs, pork, beef, and poultry. Results of the method evaluation studies of these food matrices as well as factors affecting hydrocarbon production and determination will be presented.     

便携式微波等离子体离子化检测器气相色谱仪用于气体分析的研究

本文使用自制的便携式微波诱导等离子体离子化检测器气相色谱仪对可燃气体中N_2、O_2、H_2和CH_4的测定方法进行了研究。以氩气为载气和工作气体,考察了改进后的微波诱导等离子体离子化检洲器(MIPID)的工作参数对测定的影响。对煤气和乙炔中的O_2、N_2、H_2和CH_4进行了测定,分析结果与热导池检测器(TCD)的气相色谱法一致。讨论了高电离电位(>11.7ev)气体组分在MIPID中响应特性。     

功能液晶膜的新进展

论述了功能液晶膜的新近研究结果和发展动向,指出功能液晶膜具有优异的气体分离、液体分离和电光性能,可望作为高效气体分离膜、高效液体分离膜和大面积光控膜,具有较重大的理论与实际意义。     

气相色谱-质谱法分析土壤中神经性毒剂及糜烂性毒剂

建立了土壤中神经性毒剂及糜烂性毒剂GC—MS-SIM分析法，对土壤中6种毒剂的样品制备和二步萃取方法进行了研究；该法的回收率在80．7％～89．5％，6种毒剂在0．5～10mg/L范围内毒剂质量浓度和峰面积有良好的线性相关，方法检出限为4～20ng／g，该法适用于痕量化学战剂分析。     

沥青热解残炭的燃烧特性

与轻质油品(汽油、柴油等)燃烧特性不同,重质燃料油在燃烧时,首先发生燃料的热分解,分解的产物扩散到气相空间发生着火、燃烧,最后剩下固体残炭,然后残炭再着火、燃烧,由于残炭的燃烧属于异相反应,比燃料气与空气的同相反应慢,导致其燃尽时间明显变长,文献[1]给出了沥青和十二烷单滴的燃烧过程温度变化曲线,从曲线可以看出,残炭的燃烧阶段明显比气体的燃尽时间长,而残炭的质量只为沥青质量的10%～20%[2,3]。虽然残炭含量低,但它在整个燃烧过程中占有十分重要的地位;文献[4]利用热重系统研究了渣油热加工的副产物石油焦的燃烧特性,主要从…