含铅聚合物微凝胶与硫化氢反应前后在良溶剂中的分子扩散行为

用溶液聚合法制备出轻度交联的含铅微凝胶,用光子相关光谱技术测定其在良溶剂中与H2S反应前、后的扩散行为,由外推法得到在浓度无限稀时的分子扩散系数,给出微凝胶的流体力学半径。结果表明:相同量的含铅微凝胶在不同的初始浓度下与H2S反应,生成含PbS纳米微粒的凝胶；但其体积增大不同,这说明H2S与含铅微凝胶的反应既可以在分子内也可以在分子间进行,分子间的反应使含硫化铅微凝胶扩散系数随浓度的变化曲线的线性范围变小。     

硝基甲烷在离子液体BMImBF4中的电还原特性

采用循环伏安等测试方法, 以铂微盘电极为工作电极, 研究了硝基甲烷在离子液体1-正丁基-3-甲基咪唑四氟硼酸盐(BMImBF4)中的电化学行为, 并探讨了温度和扫描速率等因素对硝基甲烷电化学特性的影响. 实验结果表明, 硝基甲烷在离子液体BMImBF4中的还原反应是受扩散控制的不可逆过程. 估算了不同温度下硝基甲烷在离子液体BMImBF4中的扩散系数D, 进而求得它的扩散活化能Ea约为39.5 kJ·mol-1.     

固定pH滴定法测定弱酸弱碱性药物

报道一种水溶液吕测定弱酸弱碱性药物的新型滴定分析方法－固定ｐＨ滴定法，其理论基础是弱酸弱碱在水溶液中各种存在形式的分布系数在ｐＨ值固定时为常数，对甲硝唑，盐酸美西律等离散常数在１０＾－８至１０＾－１１范围内的７种弱酸弱碱性药物进行测定。结果与药典法吻合，回收率在９９．４％～１００．６％，方法简便，快速，准确，制剂中的赋形剂及色物不影响测定。     

Nondestructive Monitoring of Sucrose Diffusion in Oil-in-Water Emulsions by Ultrasonic Velocity Profiling

The diffusion of sucrose through an optically opaque oil-in-water emulsion was monitored nondestructively by measuring the ultrasonic velocity as a function of height. Initially, a corn oil-in-water emulsion (0, 5, 10, 15, or 20 wt% oil) stabilized by Tween 20 (1 wt%) and xanthan (1 wt%) was placed in a measurement cell at 30°C. A 20 wt% sucrose solution containing the same concentration of Tween 20 and xanthan as the aqueous phase in the emulsion was placed on top of the emulsion. The ultrasonic velocity of this two-layer system was measured as a function of sample height and time and then converted into sucrose and oil concentration–distance profiles using empirical calibration curves. The translational diffusion coefficient of the sucrose in the upper and lower layers was determined by fitting the experimental data to a Fickian diffusion model. The measured diffusion coefficients of the sucrose molecules decreased as the droplet concentration in the emulsion increased, indicating retardation of the sugar molecule movement. Ultrasonic profiling was also used to monitor the compression of the emulsion due to movement of water molecules into the upper layer.     

Equilibrium conformations of polymer chains Part II. Conformons in networks

With regard to the ideal network it is shown that the concept ofN non-interacting polymer chains can be transformed in a problem of non interacting excitations (called conformons) for rubber elasticity. Modelling the interaction on permanent crosslinks as a scattering problem and taking the finite chain length into account, an interpretation of the second Mooney coefficient can be given. There is some evidence that the junctions move by constrained self diffusion.Dedicated to Prof. Dr. W. Ruland on the occasion of his 60th birthday.     

Unusual ion pairs and their relationship to acid ionization

Osmotic and activity coefficients, determined from isopiestic measurements, are presented for aqueous solutions of eight tetramethylguanidinium salts. It is proposed that both hydronium and tetramethylguanidinium ions are capable of forming stable ion pairs with many anions by means of bridged hydrogens forming six-membered rings and that these ion pairs are stable in rather dilute aqueous solutions.     

The pockels coefficient of new polymers for nonlinear optics and its time dependence after poling,compared with dielectric measurements

Epoxy polymers with donor–acceptor type side groups were synthesized for application in nonlinear optics. The stability of the Pockels coefficient was measured in thin films after poling. The relaxation times and their temperature dependence seem to be correlated with dielectric measurements. Guest–host systems (polystyrene and polymethylmethacrylate with dimethylaminonitrostilbene) were investigated for comparison.     

金属Cu低指数表面熔化行为的分子动力学模

采用Mishin镶嵌原子势, 通过分子动力学方法模拟了金属Cu的低指数表面在不同温度的表面熔化行为, 分析了熔化过程中系统结构组态的变化以及固-液界面迁移情况. 金属Cu的(100)和(110)表面在低于熔点发生预熔化, 而(111)表面存在明显的过热现象. 准液体层的厚度随温度升高而增加, 热稳定性与表面的密排顺序一致, 按(111)、(100)、(110)顺序增大. 当温度高于热力学熔点时, 固液界面的移动速度与温度成正比, 外推得到热力学熔点约为1360～1380 K, 与实验结果1358 K吻合良好. 动力学系数定义为界面移动速度与过热程度的比值, 表现为明显的各向异性: k100=39 cm•s−1•K−1, k110=29 cm•s−1•K−1, k111=20 cm•s−1•K−1. k100与k110之间的比例符合collision-limited理论, (111)密排面有与其它低指数表面不同的熔化方式.     

Transport properties and electroanalytical response characteristics of drotaverine ion-selective sensors

The construction and electroanalytical response characteristics of poly(vinyl chloride) matrix ion-selective sensors (ISSs) for drotaverine hydrochloride are described. The membranes incorporate ion-association complexes of drotaverine with tetraphenylborate, picrate, tetraiodomercurate, tetraiodobismuthate, Reinecke salt, and heteropolycompounds of Keggin structure—molybdophosphoric acid, tungstophosphoric acid, molybdosiliconic acid and tungstosiliconic acid as electroactive materials for ionometric sensor controls. These ISSs have a linear response to drotaverine hydrochloride over the range 8×10^–6 to 5×10^–2 mol L^–1 with cationic slopes from 51 to 58 mV per concentration decade. These ISSs have a fast response time (up to 1 min), a low determination limit (down to 4.3×10^–6 mol L^–1), good stability (3–5 weeks), and reasonable selectivity. Permeabilities and ion fluxes through a membrane were calculated for major and interfering ions. Dependences of the transport properties of the membranes on the concentrations of the ion exchanger and near-membrane solution and their electrochemical characteristics are presented. The ISSs were used for direct potentiometry and potentiometric titration (sodium tetraphenylborate) of drotaverine hydrochloride. Results with mean accuracy of 99.1±1.0% of nominal were obtained which corresponded well to data obtained by use of high-performance liquid chromatography.     

光度分析中协同系数补偿方法的研究──三次标准加入法同时测定钼、钨和钛

本文在两次标准加入法[1]的基础上，提出了三组份同时测定的三次标准加入法，并应用于钼、钨和钛的流动注射同时测定。测定条件：［水杨基荧光酮（SAF）］＝1．25　×10-4mol／L，［溴化＋六烷基三甲基铵（CTMAB）」＝2．5×10－3mol／L，pH1．35，25℃，采样、进样时间分别为10s和18s，进样频率128次／h。为消除组份间协同作用引起的吸光度加合性的偏离，定义了三组份协同系数。将其引入三组份同时测定方法，补偿了吸光度对线性的偏离。补偿后钼、钨和钛的测定范围分别为0．05～0．35，0．25～1．00，0．025～0．30mg／L。测定了钢样及模拟样品中钼、钨和钛含量，结果较好。