表面修饰二氧化锡纳米微晶的制备与表征

制备了硅烷偶联剂KH-570表面修饰的SnO2纳米微晶，通过FT-IR、XPS、TEM和TG-DTA对其结构和表面特性进行表征和研究. FT-IR和XPS分析结果确证了KH-570与SnO2表面是以化学键合或物理吸附方式相结合,粒子表面存在酯基等有机官能团的红外吸收特征；观测到KH-570中Si原子的Si2s和Si2p谱线. TEM分析表明，表面修饰反应增强了SnO2纳米微晶的疏水性和分散性.由XPS和TG的实测数据探讨了纳米粒子具有较低包覆量的可能原因.     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

表面改性对CeO2纳米粉体特性的影响

研究了表面改性对CeO2纳米粉体特性的影响，采用表面活性剂．十二烷基硫酸钠对CeO2粉末颗粒表面进行了改性。未改性和改性的纳米氧化铈用粉体综合性能测试仪、激光粒度仪、比表面积测试仪、X射线仪、扫描电子显微镜进行了表征。结果表明，用十二烷基硫酸钠表面改性能提高纳米氧化铈的流动性和分散性，减小比表面积和团聚，同时也对CeO2粉体颗粒表面改性的机制进行了探讨。     

钛酸钾晶须界面性质研究

通过乳液聚合的方法对钛酸钾晶须进行表面改性,获得了表面包裹聚甲基丙烯酸甲酯的钛酸钾晶须. FT-IR、SEM、EDS的表征表明,钛酸钾晶须的表面包裹了聚甲基丙烯酸甲酯膜,形成了以钛酸钾晶须为核,聚甲基丙烯酸甲酯为壳的复合粒子.研究表明,改性后的晶须表面能降低,在有机溶液中的界面张力大大降低,与聚甲基丙烯酸甲酯的界面性质相似,说明改性后的晶须基本被聚甲基丙烯酸甲酯完全包裹,因此晶须由亲水性变为疏水性,在有机溶液中的分散性显著提高.     

Theoretical study of the unimolecular decomposition mechanisms of energetic TNAD and TNAZ explosives

Calculation methods based on hybrid Density Functional Theory (DFT) with the basis sets of the B3LYP/6‐31+G(d)//B3LYP/4‐31G(d) method and the differential overlap (INDO) program were used to derive reasonable decomposition mechanisms of 1,4,5,8‐tetranitro‐1,4,5,8‐tetraazadecalin (TNAD) and 1,3,3‐trinitroazetidine (TNAZ) explosives. All possible decomposition species and transition states, including intermediates and products, were identified and their corresponding enthalpy of formation and Gibbs free energy of formation were obtained using polyparametric modification equations. INDO bond energy calculation results reveal the weakest bonding site for reference and determine where cleavage can occur easily. This work is concerned mainly with eliminating HONO (cis or trans form). The activation energy for trans‐form HONO elimination is lower than that of cis‐form HONO elimination in the initial steps of both TNAD and TNAZ decomposition, being 18.5 kJ/mol and 33.3 kJ/mol, respectively. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

KINETICS OF IRREVERSIBLE MODIFICATION OF ENZYME ACTIVITY IN A SYSTEM OF COUPLED ENZYME ASSAY (Ⅱ)——BOTH PRIMARY AND AUXILIARY ENZYMES MODIFIED BY REAGENT Y

Following the previous paperr, we examined the kinetics of the irreversible modification of enzyme activity in coupled assay when the modifier reacted with both primary and auxiliary enzymes. It was shown that Tsou's kinetic method can also be used in the present situation in some conditions.     

Effect of Hyperbranched Polyester on Modification of Epoxy Resins Cured with Anhydride

Epoxy resins are widely used in coatings, adhesives and polymer composites, but the applications of cured epoxy resins are often restricted by their poor toughness. HBP can be used as toughener to improve the toughness of epoxy resins due to its high-dens…     

金属离子对CdS量子点/聚酰胺-胺树形分子纳米复合材料光致发光性能的影响

以聚酰胺-胺树形分子为模板制备了分散好、尺寸均匀的CdS量子点，并用分光光度滴定法研究了Cd²⁺、Zn²⁺、Pb²⁺、Cu²⁺、Mn²⁺几种金属离子对其光致发光性能的影响。发现不同离子对CdS量子点的发光性能影响不同:Cd²⁺和Zn²⁺使量子点荧光增强，Pb²⁺、Cu²⁺和Mn²⁺使其荧光有不同程度淬灭。这归因于金属离子对CdS量子点表面的修饰作用。Cd²⁺能减少由S^2-悬键构成的非辐射复合中心，增强树形分子对量子点表面缺陷的钝化作用，并能在量子点周围形成类肖特基能垒，从而显著增大CdS量子点的光致发光效率。由于ZnS与CdS的晶格参数非常接近，Zn²⁺能起到与Cd²⁺类似的作用，使CdS量子点的发光效率大大增强。Pb²⁺和Cu²⁺能取代Cd²⁺在CdS量子点表面生成窄带隙的壳层，对其发光有很强的淬灭作用。由于块体PbS的带隙比块体CuS窄，故Pb²⁺的淬灭能力强于Cu²⁺。Mn²⁺能破坏Cd²⁺与PAMAM树形分子的配位键，降低树形分子对CdS量子点表面缺陷的钝化作用，且其本身在量子点表面构成了新的荧光淬灭中心，但Mn²⁺也能形成较弱的类肖特基能垒，故对量子点的发光淬灭作用较弱。     

Fluoride and lead adsorption on carbon nanotubes

The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on.…     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.