Annealing effect on phase transformation in nano structured Ni–Mn–Ga ferromagnetic shape memory alloy

Nano structured Ni_52.6Mn_23.7Ga_24.3 alloy was prepared using the ball milling technique. High martensitic transition temperatures are observed in the range between 336 and 367 K. The X-ray diffraction profile revealed that annealed Ni–Mn–Ga powder at 1073 K displays mixture phases of austenite and martensite. Annealing at 1173 K induces phase transformation from mixture phase to Heusler L2₁ structure, which confirms the high-temperature shape memory effect. On the contrary, the milled sample shows no evidence of shape memory effect. Furthermore, annealing at higher temperature (1273 K) shows the accumulation of oxidation, which leads to the loss of shape memory effect. The grain size increases with increasing annealing temperature and causes deterioration in the soft magnetic properties.     

诺贝尔物理学奖与长度基准的历史沿革

从2005年诺贝尔物理学奖出发,考察了已往和长度基准有关的诺贝尔物理学奖,从物理学史的角度．探讨了长度基准的历史沿革及其意义．     

Improving separation capability of regenerated cellulose ultrafiltration membrane by surface modification

In this study we introduced dialdehyde groups to a commercial regenerated cellulose (RC) ultrafiltration membrane by periodate oxidation. They were further converted to nitrogen-containing derivatives by Schiff base reaction with diethylenetriamine (DETA). The modified membrane was challenged with aqueous solution containing Pb(II) metal ions. The different variables affecting the rejection of lead ion by membrane including oxidization time, concentration of DETA, initial metal ion concentration and pH of the solution were elucidated. The membranes were characterized by FTIR-ATR, SEM, EDAX and elemental analyses. The process efficiency was enhanced by improving the oxidization time up to a certain period. In our case this was diminished after 9 h due to deterioration in the membrane integrity. The Pb²⁺ removal was facilitated by increasing feed pH and DETA concentration. This was diminished for more concentrated metal ion in the feed. Membrane regeneration was successfully utilized using 0.1 M HNO₃ solution. The removal capability of the regenerated membranes was maintained even after four cycles.     

Corrosion and passivation behavior of Mg-Zn-Y-Al alloys prepared by cooling rate-controlled solidification

Highly corrosion-resistant nanocrystalline Mg-Zn-Y-Al multi-phase alloys have been prepared by consolidation of rapidly solidified (RS) ribbons. The relation between corrosion behavior and microstructure evolution of Mg-Zn-Y-Al alloys with a long period stacking ordered phase has been investigated. In order to clarify the influence of rapid solidification on the occurrence of localized corrosion such as filiform corrosion, several Mg_96.75Zn_0.75Y₂Al_0.5 (at.%) alloys with different cooling rates are fabricated by the gravity casting, copper mould injection casting and melt-spinning techniques and their corrosion behavior and microstructures are examined by the salt water immersion test, electrochemical measurements, GDOES, XRD, SEM and TEM. To clarify the effect of aluminium addition on the improvement in corrosion resistance of the alloys, several Mg_97.25−xZn_0.75Y₂Al_x alloys with different aluminium contents are fabricated by consolidating RS ribbons and the formation of corroded films on the Mg-Zn-Y-Al alloys have been investigated. Rapid solidification brings about the grain refinement and an increase in the solid solubility of zinc, yttrium and aluminium into the magnesium matrix, enhancing microstructural and electrochemical homogeneity, which in turn enhanced corrosion resistance. The addition of aluminium to magnesium can modify the structure and chemical composition of surface films and improves the resistance to local breakdown of the films.     

Mechanical response of proton beam irradiated nitinol

The present investigation deals with the study of mechanical behavior of proton beam irradiated nitinol at room temperature. The specimens in austenitic phase were irradiated over periods of 15, 30, 45 and 60 min at room temperature using 2 MeV proton beam obtained from Pelletron accelerator. The stress-strain curves of both unirradiated and irradiated specimens were obtained using a universal testing machine at room temperature. The results of the experiment show that an intermediate rhombohedral (R) phase has been introduced between austenite and martensite phase, which resulted in the suppression of direct transformation from austenite to martensite (A-M). Stresses required to start R-phase (σ_RS) and martensitic phase (σ_MS) were observed to decrease with increase in exposure time. The hardness tests of samples before and after irradiation were also carried out using Vickers hardness tester. The comparison reveals that the hardness is higher in irradiated specimens than that of the unirradiated one. The increase in hardness is quite sharp in specimens irradiated for 15 min, which then increases linearly as the exposure time is increased up to 60 min. The generation of R-phase, variations in the transformation stresses σ_RS and σ_MS and increase in hardness of irradiated nitinol may be attributed to lattice disorder and associated changes in crystal structure induced by proton beam irradiation.     

Facile synthesis of thiol-stabilized CdSexTe1−x nanocrystals

CdSe_xTe_1−x nanocrystals (x=0.25, 0.40, 0.50, 0.60 and 0.75) were synthesized using thioglycerol as a stabilizing agent. The composition of the CdSe_xTe_1−x nanocrystals was precisely controlled by tuning the precursor (Se/Te) ratio. The structural, morphological and optical properties of the nanocrystals were analyzed using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), diffused reflectance spectroscopy (DRS) and photoluminescence (PL) measurements. It is found that the Se/Te ratio significantly affects the properties of the resultant CdSe_xTe_1−x nanocrystals. XRD pattern of the CdSe_xTe_1−x nanocrystals revealed cubic, hexagonal and mixed phases depending on the ratio of Se:Te. Surface morphology of the CdSe_xTe_1−x nanocrystals showed nanoclusters of sizes ∼50 nm, with the adjacent cluster interlinking each other. DRS revealed the size dependence band gap energy prevailing in the CdSe_xTe_1−x nanocrystals from 1.52 to 2.66 eV due to the optical bowing effect. PL measurements exhibited band edge emission in the visible spectral region, and are red shifted with increase in Se concentration. The facile route employed in the present work to synthesis the CdSe_xTe_1−x nanocrystals in an aqueous medium is simple and controllable, and the strategy presented will be handy in preparing diverse semiconducting nanocrystals.     

An integrated approach to the study of the tautomerism of 4‐((Phenylimino)methyl) naphthalene‐1‐ol

The aim of the current report is to shed light on the tautomerism of 4‐((Phenylimino)methyl) naphthalene‐1‐ol in solution, which was studied by UV–Vis spectroscopy and quantum chemical calculations. It was found that this compound does not have the typical tautomeric behavior of its analog 4‐Phenylazo‐naphthalen‐1‐ol. The complicated equilibrium between the enol‐ and keto‐like forms and two kinds of dimers that can exist in solution, is strongly dependent on the proton acceptor/donor abilities of the solvent. Using advanced data treatment quantitative information about the tautomeric and dimeric equilibrium constants was obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Growth of Pt thin films on WSe2

The morphology and structure of Pt deposited on a WSe₂(0 0 0 1) van der Waals surface have been investigated by reflection high energy electron diffraction and scanning tunneling microscopy. At room temperature, the initial growth is characterized by the formation of three-dimensional fcc Pt islands with (1 1 1) orientation. In contrast, at higher temperatures of about 450 °C the formation of a novel chemically ordered Pt-Se alloy is observed. Based on the diffraction patterns, a tetragonal DO₂₂-type structure of a Pt₃Se compound is suggested. With increasing Pt thickness, this chemically ordered alloy disappears and an additional superstructure occurs, which is accompanied by the coalescence of the islands. The observed superstructure is attributed to a strong Se diffusion towards the growth surface, forming most likely a PtSe₂ alloy with the CdI₂-type layered structure on the top surface. Due to the lateral lattice mismatch between the Pt(1 1 1) layers and the PtSe₂(1 1 1) top layer, a Moiré pattern with a period of 1.1 nm is created, which might be used as a long-range atomic pattern for further nanostructure growth.     

δ/γ transformation in non-equilibrium solidified peritectic Fe-Ni alloy

Through phase transformation kinetic analysis and experimental observation, the δ/γ transformation occurring in the non-equilibrium peritectic Fe-4.33at.%Ni alloys was systematically investigated. According to JMA solid-state transformation kinetic theory, the Time-Temperature-Transformation (TTT) curves of the δ/γ transformation in peritectic Fe-Ni alloy were calculated. On this basis, the physical correlation between the δ/γ transformation and the initial undercooling of melt (△T) was elucidated. The results indicate that the change of △T can alter not only the overall δ/γ transformation pathways but also the transformation fraction with respect to each transformation mechanism.     

乙醇与三氯六氨络合钴协同作用导致的DNA凝聚

利用原子力显微镜技术(AFM),系统地研究了由乙醇与多价离子(hexammine cobalt(Ⅲ)[Co(NH3)36+])协同作用导致的λ-DNA凝聚现象.单独测得3价Co(NH3)36+的临界凝聚浓度大约是10μmol·L-1,乙醇的临界凝聚体积分数大约是15%.若3价离子[Co(NH3)36+]的浓度大于400μmol·L-1时,可以观察到DNA的解凝聚现象.在DNA溶液中同时加入乙醇(体积分数12%)与Co(NH3)36+(8μmol.L-1),当其浓度各低于其临界值,也可观察到凝聚现象,说明乙醇与Co(NH3)36+对DNA的凝聚有协同作用,而且在协同作用下,可以观察到典型的圆环结构(toroids).利用电荷逆转与离子释放机制分析了观察到的解凝聚现象.