Annealing effects on the magnetization of Co–Ni–B amorphous nanoparticles

Chemically prepared (Co_xNi_1−x)_1−yB_y (x=0.5, 0.75, 1; y≈0.4) amorphous fine particles were characterized by X-ray diffraction, DTA and TGA, and in situ magnetic measurement as a function of annealing temperature in an inert atmosphere. Magnetic measurement performed in as-prepared and 150°C annealed samples shows an increase of the saturation magnetization and magnetic moment after thermal treatment. Room temperature magnetization increases by factors of 3.5, 1.8, and 1.5, for x=0.5, 0.75, and 1, respectively. These measurements may indicate a local re-ordering of the amorphous phase at temperatures much lower than the full crystallization temperature.     

A complementary thermodynamic limit for classical Coulomb matter

The canonical equilibrium measure of classical two-component Coulomb matter with regularized interactions is analyzed in a finite volume. It is shown that, in the mean-field regime, the one-particle density is inhomogeneous on a new characteristic length scale _inh. For a system ofN positive andN negative particles, _inh and the characteristic length scale of correlations _corr (=Debye screening length) are related via _inh=(2N)^1/2 _corr. The major conceptual conclusion that is drawn from this is that one needs two nontrivial complementary thermodynamic limits to define the equilibrium thermodynamics of two-component Coulomb systems. One of them is the standard thermodynamic limit (infinite volume), where one takesN, _corr fixed. Its complementary limit is characterized byN, _inh fixed, and is a finite-volume inhomogeneous mean-field limit. The most prominent new feature in the mean-field thermodynamic limit, which is absent in the standard thermodynamic limit, is an anomalous first-order phase transition where the Coulomb system explodes or implodes, respectively. The phase transition is connected with the existence of a metastable plasma phase far below the ionization temperature.     

兖州高硫煤的加氢热解脱硫及脱硫动力学

在加压热天平上，考察了氢气和氮扬气氛下高硫煤的热解脱硫。利用气相色谱在线分析研究了硫化氢氢气的逸出规律。结果表明，加氢热解比氮气下的热解有着更显著的脱友作用，脱硫率可达９０％以上。而且加氢热解下６５％的脱除硫转化为气相硫化氢，而氮气下热解是有８０％的硫转化为液相。     

平朔气煤的煤岩显微组分结构研究

用显微光度计、扫描电子显微镜(SEM)、傅立叶变换红外光谱(FTIR)、X射线衍射光谱(XRD)和X光电子能谱(XPS)等测试手段研究了平朔气煤的等密度梯度离心分离(DGC)显微组分富集物的结构。结果表明,镜质组和稳定组结构相似,含氧基团基本相同,但丝质组结构则不同,它含有较多的羧基和羰基。根据实验结果讨论了三种显微组分的大分子结构,认为它们是由许多结构相似而又不相同的结构单元所构成。镜质组和稳定组的单元核心主要为脂环、缩聚芳环,环数为5—6个;丝质组单元核心主要为缩聚芳环,环数为7—8个,环缩合程度最高,芳香层片在空间排列规则,相互定向程度大。     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

Structure of polynuclear palladium(ii) hydroxocomplexes formed upon alkaline hydrolysis of palladium(ii) chloride complexes

The structure of polynuclear Pd^II hydroxocomplexes (PHC) formed as a result of alkaline hydrolysis of Pd^II chloride complexes was studied by EXAFS, SAXS, and TEM methods. It is established that in aqueous solutions a hydroxocomplex particle is a filament curled into a ball containing about 100 Pd atoms. The filament consists of planar coordination squares of PdO₄ units linkedvia one or two oxygen bridges of different geometry. Aging of samples results in an increase in the number of single bridging ligands and a decrease in the diameter of particles. Interatomic distances around palladium atoms were determined.Translated fromIzvestiya Akademii Nauk. Seriya Khimlcheskaya, No. 10, pp. 1901–1905, October, 1995.     

Growth Mechanism of Large Monodispersed Silica Particles Prepared from Tetraethoxysilane in the Presence of Sodium Dodecyl Sulfate

Monodispersed silica particles up to ca. 1.2 μm in diameter were prepared by hydrolysis of tetraethoxysilane in the presence of sodium dodecyl sulfate (SDS). The particle size was increased with an increase of SDS added. The geometrical standard deviation of the particles was decreased with an increase of SDS. In the earlier reaction stage, double spherical particles by the coalescence of the particles were frequently observed when large amounts of SDS were added. Particle size was gradually increased after the coalescence occurred and spherical particles were finally obtained. The results of Nielsen’s chronomal analysis suggest that the polynuclear layer growth took place after the coalescence of the particles in the presence of larger amount of SDS.     

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

精制煤液化中油加氢裂化制取喷气燃料的研究

在实验室固定床反应装置上,选用Mo-Ni-P/Si-Al工业催化剂,对精煤液化中油进行了加氢裂化制取喷气燃料的实验。考察了反应温度、空速对芳烃加氢转化及产品馏分分布的影响。通过加氢裂化,降低了油品芳烃含量,提高了喷气燃料馏分的收率。在总压为15MPa,反应温度为350—360℃,空速为0.8—1.0h~(-1)条件下,获得了芳烃含量低于10w%的低结晶点的优质喷气燃料产品。并对煤液化中油制取的喷气燃料的组成和性质进行了分析和评价。     

中药配方颗粒红外光谱法的快速鉴别

采用红外光谱法对中药配方颗粒及其辅料进行了鉴别研究。结果表明：不同生产厂商的配方颗粒中所添加的辅料类型及用量有较大差别；不同种的配方颗粒在辅料含量较低的情况下有较明显的指纹性，而辅料含量较高时，采用差谱技术可以提高谱图的指纹性，达到中药配方颗粒--鉴别的目的。该法简便、快速、可靠，是中药配方颗粒宏观质控的一个强有力的手段。