Solar energy conversion from water photolysis by biological and chemical systems

The production of chemicals and fuels, or energy-rich compounds, from water by sunlight is described as a particularly attractive means for the conversion of solar energy to a valuable renewable resource. The redox properties of photoexcited molecules and the operating mechanism of light-driven systems are first considered. The mechanism of water oxidation carried out by higher plants and green algae-which is actually one of the most important biochemical reactions—as well as that of artificial photosystems, up-to-now designed trying to simulate the natural process with higher efficiency and simplicity, are likewise discussed. A number of biological and chemical light-driven systems are presented as practical ways to solar energy conversion.     

ORGANIC GEOCHEMISTRY OF ARTIFICIALLY HEATED SPHAGNUM COAL CONSIDERED AS POSSIBLE SOURCE ROCK FOR OIL AND GAS

A preliminary study of simulated thermal maturity has been conducted to evaluate the oil, gas and hydrocarbon generation potential of sphagnum coal in the Jinsuo brown coal basin, Yunnan Province and to understand the characteristics of the element composition and biomarkers in the course of thermal alteration. The experimental result was compared with that of xylitic coal, a kind of lithotype of soft brown coal. It is considered that sphagnum coal possesses the potential of forming economic accumulation of oil and gas. Its highest proportion of oil and hydrocarbon generation is 510 mg/g Corg. and 232.1 mg/g Corg. respectively. At an R_(ran)~° value of 2.51%, the ratio of gas generation from sphagnum coal attains to 620.5 ml/g Corg. In view of sphagnum coal being different from the conventional soft brown coal in various respects such as coal forming raw materials and enviroments as well as physico-chemical properties, it is Suggested as a special kind of source rock for coal-generated oil and gas.     

Plasma-Chemical Conversion of Lower Alkanes with Stimulated Condensation of Incomplete Oxidation Products

Oxidative conversion of a mixture of natural gas and oxygen in a barrier-discharge plasma-chemical reaction was investigated experimentally. The process was conducted at atmospheric pressure and room temperature. The discharge was initiated by high-voltage pulses of 50–100 s duration at a repetition frequency of up to 2 kHz. The principal feature of the process was that in the plasma-chemical reactor conditions were created which stimulated the condensation of the products of incomplete oxidation of methane that resulted in the formation of aerosol even from nonsaturated vapor. The removal of intermediate reagents from the gaseous phases into the aerosol prevented them from further oxidation. Depending on the experimental conditions, the mass percentage of the components of the condensate formed varied within the following limits: formic acid from 20 to 40%, methanol from 8 to 15%, methylformate from 4 to 8%, and water from 40 to 60%. The conversion process has been realized on a laboratory setup of average power up to 1 kW. In the single-pass mode, a 57% degree of conversion of the mixture has been achieved. The energy value of the condensate is 15–20 kWh/kg.     

阳离子改性HZSM-5沸石上低碳醇反应历程的TPSR-MS研究

用ＴＰＳＲ－ＭＳ技术研究了Ｃｕ，Ｚｎ和Ｇａ改性Ｈ－ＺＳＭ－５沸石的活性中心性质及Ｃ１～Ｃ４醇的反应历程。结果表明，Ｚｎ－和Ｇａ－ＺＳＭ－５有两种芳构化活性中心，即Ｂ酸和Ｚｎ，Ｇａ活性物种；甲醇在Ｃｕ－ＺＳＭ－５上只生成二甲醚、ＣＯ和ＣＯ２，而在Ｚｎ－ＺＳＭ－５上芳构化反应历程为：（１）醇经由醚脱水生成烯烃，Ｃ２～Ｃ４醇学可单分子脱水生成烯烃；（２）烯烃中间物齐聚，齐聚物通过氢转移和脱氢途径环化、芳     

Synthesis and Crystal Structure of a New Quinazolinone Compound 2,3-Dihydro-2-（2-hydroxyphenyl）-3-phenyl-quinazolin-4（1H）-one

A new quinazolinone compound 2,3-dihydro-2-(2-hydroxyphenyl)-3-phenylquinazolin-4(IH)-one 3 ([C2oH16O2N2]-C2H5OH, Mr = 362.42) and compound 2-(2-hydroxybenzylidene-amino)-N-phenyl-benzamide 2 (C2oH16O2N2, Mr = 316.34) were prepared from a precursor of 2-amino-N-phenyl-benzamide 1 (C13H12ON2, Mr = 212.25). Compound 3 was characterized by single-crystal X-ray diffraction analysis. The crystal belongs to orthorhombic,space group Pbca with a = 1.2889(11), b = 1.6170(14), c = 1.7729(15) nm, V= 3.695(6) nm^3, Z= 8, F(000) = 1536, Mr = 362.42, Dc = 1.303 g/cm^3, μ(MoKa) = 0.087 mm^-1, R = 0.0447 and wR= 0.0879. The crystal structure analysis indicates that the title compound has a two-dimensional network structure formed by hydrogen bonds and electrostatic interactions.     

Factors affecting propagating fronts of addition polymerization: Velocity,front curvature,temperatue profile,conversion, and molecular weight distribution

Several properties of propagating fronts of addition polymerization were studied. A power function could be fit to the velocity dependence on initiator concentration, but not with the exponents predicted by current models or in agreement with other published work. Bubbles from the volatile by-products of initiator decomposition were found to affect the front velocity and curvature. The front velocity for triethylene glycol dimethacrylate polymerization was found to depend linearly on temperature over a moderate range. The conversion of methacrylic acid in fronts varied greatly with initiator type and concentration. Benzoyl peroxide produced much lower conversion than t-butyl peroxide, but fronts with tBPO propagated slower. A dual initiator system of BPO and tBPO produced rapidly propagating fronts with good conversion but the contribution of each initiator to the velocity was not additive. The possibility of chain branching was considered. The apparent molecular weight distributions were very broad, often trimodal, and found to depend on initiator type and concentration as well as the tube diameter. The temperature profiles were measured and found to be very sharp for BPO and broader for tBPO but both had front temperatures in excess of 200°C, indicating a high ceiling temperature. © 1995 John Wiley & Sons, Inc.     

Conversion of phosphogypsum to potassium sulfate

Summary Solubility of calcium sulfate in concentrated aqueous chloride solutions is of particular significance in chloride hydrometallurgy and various crystallization processes, such as the production of potassium sulfate from phosphogypsum and potassium chloride. This paper examines an example of the second type of application in which gypsum and potassium chloride are reacted to form K₂SO₄. The solubility of phosphogypsum in aqueous solutions of KCl, HCl, and mixtures of both has first been measured at various temperatures and concentrations. The parameters investigated are HCl concentration up to 6M, KCl concentration up to 180 g L^-1 and temperature from 25 to 80°C. In addition, the influence of co-existing chloride salts, such as (HCl+KCl), on the solubility of calcium sulfate is estimated from 25 to 80°C. The solubility increases obviously with the temperature increment as it does initially with acid concentration, reaching a maximum of about 3M HCl, 130 g L^-1 KCl and then drops. At the same time, the solubility of CaSO₄·2H₂O decreases with increasing KCl concentration.     

紫外光引发甲基丙烯酸甲酯乳液聚合

以60W高压汞灯为光源,以偶氮二异丁氰(AIBN)为主要光引发剂,以甲基丙烯酸甲酯(MMA)为单体进行乳液聚合,考察了光照时间、单体浓度、光引发剂浓度等因素对单体转化率的影响;采用透射电镜观察了乳胶粒的形态,并测定了其尺寸.结果表明,转化率随光照时间和单体浓度的增加而上升;当光引发剂质量分数为3%时单体转化率最高.     

Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.