利用溶液理论计算饱和甲烷中二氧化碳溶解度

求取二氧化碳在饱和液态甲烷中的溶解度,对于在较高温度下实现液化天然气至关重要。文中在理想溶液基础上,采用正规溶液关系式和改进的Scatchard-H ildebrand关系式进行二氧化碳的溶解度计算,并且在临界点附近采用经验公式对其进行修正。将上述计算结果与Davis实验数据进行比较后表明,改进的正规溶液理论计算方法在低于140K温区时可推荐用于此项溶解度计算,经验公式可用于接近临界温度区域的溶解度计算。     

Mesoscopic structure and properties of liquid crystalline mesophase pitch and its transformation into carbon fiber

The history and present state of the art in the chemistry of mesophase pitch, which is an important precursor for carbon fiber and other high-performance industrial carbons, are reviewed relative to their structural properties. The structural concepts in both microscopic and macroscopic views are summarized in terms of the sp(2) carbon hexagonal plane as a basic unit common to graphitic materials, its planar stacking in clusters, and cluster assembly into microdomains and domains, the latter of which reflect the isochromatic unit of optical anisotropy. Such a series of structural units is described in a semiquantitative manner corresponding to the same units of graphitic materials, although the size and stacking height of the hexagonal planes (graphitic sheets) are very different. Mesophase pitch is a liquid crystal material whose basic structural concepts are maintained in the temperature range of 250 to 350 degrees C. The melt flow and thermal properties are related to its micro- and mesoscopic structure. The structure of mesophase-pitch-based carbon fiber of high tensile strength, modulus, and thermal conductivity has been formed through spinning, and has inherited the same structural concepts of mesophase pitch. Stabilization settles the structure in successive heat treatments up to 3000 degrees C. Carbonization and graphitization enable growth of the hexagonal planes and their stacking into units of graphite. Such growth is governed and controlled by the alignment of micro- and mesoscopic structures in the mesophase pitch, which define the derived carbon materials as nanostructural materials. Their properties are controlled by the nanoscopic units that are expected to behave as nanomaterials when appropriately isolated or handled.     

Chemical shift driven geometry optimization

A new method for refinement of 3D molecular structures by geometry optimization is presented. Prerequisites are a force field and a very fast procedure for the calculation of chemical shifts in every step of optimization. To the energy, provided by the force field (COSMOS force field), a pseudoenergy, depending on the difference between experimental and calculated chemical shifts, is added. In addition to the energy gradients, pseudoforces are computed. This requires the derivatives of the chemical shifts with respect to the coordinates. The pseudoforces are analytically derived from the integral expressions of the bond polarization theory. Single chemical shift values attributed to corresponding atoms are considered for structural correction. As a first example, this method is applied for proton position refinement of the D-mannitol X-ray structure. A crystal structure refinement with 13C chemical shift pseudoforces is carried out.     

TA on Mo(W)/Cu(Ag)/S clusters derived with [Cp*MS3]- Kinetics of [PPh4]2[Cp*WS3(CuBr)3]2 and [PPh4]2[Cp*MoS3(CuBr)3]2

Thermal analysis on two new heterometallic sulfide clusters, [PPh4]2[WS3(CuBr)3]2 and [PPh4]2[MoS3(CuBr)3]2 (where PPh4=tetraphenyl phosphonium, =pentamethylcyclopenta- dienyl), was carried out using a simultaneous TG-DTA unit in an atmosphere of flowing nitrogen and at various heating rates. Supplemented using EDS method, their thermal behavior and properties, together with the composition of their intermediate product, were examined and discussed in connection with their distinctive molecular structure as a dianion, which provided some theoretically and practically significant information. Both clusters decomposed in a two-step mode, but without a stable new phase composed of Mo/W-Cu-S formed during their decomposition process as we expected. Based on TG-DTG data, four methods, i.e. Achar-Brindley-Sharp, Coats-Redfern, Kissinger and Flynn- Wall-Ozawa equation, were used to calculate the non-isothermal kinetic parameters and to determine the most probable mechanisms. This revised version was published online in July 2006 with corrections to the Cover Date.     

Inexpensive and accurate predictions of optical excitations in transition-metal complexes: the TDDFT/PBE0 route

Time-dependent density functional theory (TDDFT) is applied to calculate vertical excitation energies of three representative transition metal complexes. The computational model (PBE0) is obtained by combining the Perdew-Burke-Erzenrhof (PBE) generalized gradient functional with a predetermined amount of exact exchange. Our results show that the TDDFT/PBE0 model represents a cheap and reliable tool for the computation of optical excitations for transition metal complexes. Received: 8 August 2000 / Accepted: 7 September 2000 / Published online: 23 November 2000     

On expectation value calculations of one-electron properties using the coupled cluster wave functions

The ability of various approximate coupled cluster (CC) methods to provide accurate first-order one-electron properties calculated as expectation values is theoretically analysed and computationally examined for BH and CO. For actual calculations the infinite number of terms of the expectation value expansion (O=¦exp (T ⁺)O exp (T)¦_c) was truncated so that T ₁ T ₂, T ₃, and (1/2) T ₂T₂ clusters were retained on both sides of O. The role of individual clusters is carefully discussed. Inclusion of T ₁, is unavoidable, but if triples are essential in the energy evaluation, they may play an even more important role in the property expansion, as shown in the case of CO. It is shown that the CC wave function, which is exact to second order, effectively satisfies the Hellmann-Feynman theorem.     

梯形四核有机锡氧簇合物的合成、表征、量子化学、热稳定性及荧光性质研究

在甲醇中三苄基氯化锡与3,4-二甲氧基苯甲酸发生脱烃基反应,合成了梯形四核有机锡氧簇合物[（μ-O）（μ-OMe）（L）Sn₂（CH₂Ph）₄]₂（HL=（MeO）₂C₆H₃CO₂H）,经UV、IR、元素分析及X-射线单晶衍射表征结构。该晶体属三斜晶系,空间群P1,晶体学参数：a=1.2256（5）nm,b=1.2294（5）nm,c=1.3780（5）nm,α=69.784（7）°,β=68.568（7）°,γ=72.926（7）°,V=1.7801（12）nm³,Z=1,D_c=1.549g·cm^-3,μ（Mo Kα）=1.447mm^-1,F（000）=832,R₁=0.0261,wR₂=0.0606。晶体结构分析表明：整个分子是以Sn₂O₂四元环为中心的对称结构,中心锡原子呈五配位畸变三角双锥构型。晶体中,两相邻的配合物分子经C-H咅作用组成一维带状结构。利用量子化学G03W软件,在LANL₂DZ基组对配合物的稳定性、前沿分子轨道组成及能量进行研究。热重分析表明,配合物在128℃以下能稳定存在。此外,还研究了该配合物的荧光性质。     

Two Lanthanide(III)?Copper(II) Organic Frameworks Based on {OLn6} Clusters that Exhibited a Large Magnetocaloric Effect and Slow Relaxation of the Magnetization

Two new 3D lanthanide(III)? copper(II) organic frameworks based on unusual {OLn₆} clusters have been successfully synthesized and fully characterized. Crystallographic studies showed that the {OLn₆} clusters acted as 12‐connected nodes that were linked together by [CuL₂] (H₂L=3‐hydroxypyrazine‐2‐carboxylic acid) moieties to construct an interesting 4,12‐c net with the point symbol {4³⁶.6³⁰}{4⁴.6²}₃. Magnetic studies revealed that these two isostructural heterometallic frameworks exhibited different magnetic properties, depending on the different anisotropies of the lanthanide spin carriers: Gd‐Cu showed a large magnetocaloric effect, with an entropy change (?ΔS_m) of 35.76 J kg^?1 K^?1, which is one of the largest values in high‐dimensional complexes, whilst Dy‐Cu exhibited slow relaxation of the magnetization at low temperatures.