1-芳酰基-4-(1'-N-β-D-吡喃型糖基)氨基硫脲类化合物的合成(英文)

通过 2 ,3,4 ,6 四 O 乙酰基 β D 吡喃型葡萄糖异硫氰酸酯和 2 ,3,4 三 O 乙酰基 β D 吡喃型木糖异硫氰酸酯与取代的芳基酰肼的亲核加成反应合成了 1 0个 1 芳酰基 4 ( 1′ N 2′,3′,4′,6′ 四 O 乙酰基 β D 吡喃型葡萄糖基 )氨基硫脲和 7个 1 芳酰基 4 ( 1′ N 2′,3′,4′ 三 O 乙酰基 β D 吡喃型木糖基 )氨基硫脲 ,所得化合物的结构经元素分析 ,IR ,1 HNMR确证 .     

N-(5,5-二甲基-1,3,2-二氧杂己内磷酰基)取代苯甲醛腙的合成及其阻燃性能

环状磷酸酯;水合肼;膨胀型阻燃剂;N-(5;5-二甲基-1;3;2-二氧杂己内磷酰基)取代苯甲醛腙的合成及其阻燃性能     

反相高效液相色谱法测定叶酸及其相关物质

建立了反相高效液相色谱法对叶酸及其相关物质的分离测定方法。对叶酸原料药进行了测定,色谱柱为JASCO C18柱(250mm×4.6mmi.d.,5μm),流动相为V(0.05mol LKH2PO4):V(0.1mol LKOH)∶V(甲醇)=78∶2∶20,流速为1.0mL min,柱温为30℃。叶酸检出限为1.0ng,叶酸的质量分数为98.52%～99 87%;加标回收率为95.22%～100.83%。该法快速简捷,精密度高,重现性好,可用于叶酸的质量控制。     

Synthesis ad Some Conversions of Partially Hydrogenated 1-Aminopyrano(thiopyrano)[4,3-d]pyrazolo[3,4-b]pyridines and Pyrazolo[3,4-c]isoquinolines

We have synthesized derivatives of pyrano(thiopyrano)[4,3-d]pyrazolo[3,4-b]pyridine and pyrazolo[3,4-c]isoquinoline, and we have also carried out some conversions with them.     

Structural and dynamical properties of methane clathrate hydrates

Equilibrium molecular dynamics (MD) simulations have been performed in both the NVT and NPT ensembles to study the structural and dynamical properties of fully occupied methane clathrate hydrates at 50, 125, and 200 K. Five atomistic potential models were used for water, ranging from fully flexible to rigid polarizable and nonpolarizable. A flexible and a rigid model were utilized for methane. The phonon densities of states were evaluated and the localized rattling modes for the methane molecules were found to couple to the acoustic phonons of the host lattice. The calculated methane density of states was found to be in reasonable agreement with available experimental data.     

大比表面积钛黑颜料的制备和表征

本文首次通过pH值控制沉淀法制备前驱物丁二酸钛肼复盐,并进一步热分解制备大比表面积钛黑颜料-黑色钛氧化物。通过比表面积(BET)、电子能谱(EDS)、X射线光电子能谱分析(XPS)、X射线粉末衍射(XRD)、场发射扫描电子显微镜(HRSEM)、物理吸附仪、激光粒度仪和Color i5型台式分光测色仪对黑色钛氧化物进行了表征,确定了黑色钛氧化物的组成为2TiO2·Ti2O3,其表面积为53.854 4 m2·g-1。并考察了酸源、水合肼用量、酸钛比、反应时间、pH、NaOH浓度和煅烧温度等各种反应参数对黑色钛氧化物的颗粒尺寸、分布均匀性和黑色度的影响。用元素分析仪和等离子体光谱仪测定了前驱物组成,确定其组成为[Ti(C4H4O4)2]0.85·2Ti2O3·6N2H4·3H2O,并探讨了黑色钛氧化物形成机理,为新型混合价材料黑色钛氧化物的制备提供重要参考依据。     

A sensitive amperometric sensor for hydrazine based on Pt nanoparticles-reduced graphene oxide–multi-walled carbon nanotubes composite

The platinum nanoparticles-reduced graphene oxide-multi-walled carbon nanotubes composite (PtNPs-rGO-MWCNTs) has been synthesised by one-step chemical co-reduction strategy in ethylene glycol (EG) system using sodium citrate as reducing agent. The X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), as well as the electrochemical methods have been used for the characterisation of this composite. Benefiting from the large effective surface and good carrier function of rGO-MWCNTs, PtNPs in this nanocomposite have some excellent characteristics such as small particle size, good dispersion, as well as high electrocatalytic activity. Based on this, a new electrochemical sensor for hydrazine has been fabricated using dropping method. Under the optimum conditions, the linear range for the determination of hydrazine by amperometry at 0.20 V (vs. SCE) in phosphate buffer (pH 7.0) is from 2.0 × 10^?7 mol L^?1 to 2.3 × 10^?3 mol L^?1. The detection limit and sensitivity is 4.5 × 10^?8 mol L^?1 (S/N = 3) and 219.7 μA mM^?1, respectively. This sensor has some attractive analytical features such as low detection limit, wide linear range, high sensitivity, as well as good stability.     

碳化物修饰的有序介孔炭的制备及其催化肼分解性能

 以间苯二酚和甲醛为炭源, F127 (EO₁₀₆PO₇₀EO₁₀₆) 为结构导向剂, 在酸性水/乙醇溶液中引入 (NH₄)₆Mo₇O₂₄•4H₂O 或 (NH₄)₂WO₄ 溶液, 经静置自组装形成凝胶, 再于 N₂ 中焙烧即合成出金属碳化物修饰的有序介孔炭材料. 结果表明, 金属离子的种类和用量对碳化物的分散度和介孔炭的有序度影响很大. 通过控制金属离子的用量可制备出粒径为 3~5 nm 且高度分散在介孔炭骨架中的碳化物粒子. 与分步浸渍法相比, 一步法制备的碳化物具有更高的分散度和催化肼分解活性.     

The detection of tetrahydrofuran hydrate formation and saturation using magnetic resonance imaging technique

Tetrahydrofuran (THF) hydrate was formed in bulk as well as in glass beads pack with a mean diameter of 3.0 mm by controlling the temperature under ambient pressure. Images of THF hydrate formation procedure were obtained using the magnetic resonance imaging (MRI) technique. The experiment results showed that MRI is an effective method for the detection of hydrate formation. Saturation of hydrate formed both in bulk and glass beads can be confirmed by intensity integration of MRI images.