Double-imprinted polymer based on cross-linked poly(vinylimidazole–trimethylolpropane trimethacrylate) in solid phase extraction for determination of lead from wastewater samples by UV–vis spectrophotometry

The monitoring of the heavy metal pollution in wastewater is increasingly becoming a crucial global issue since they tend to accumulate in food chains and can cause many biological abnormalities. In this work, it was developed a novel lead ion-imprinted polymer (IIP) using sodium dodecyl sulphate (SDS) as a second template to be used as adsorbent in solid phase extraction (SPE) for determination of lead from wastewater samples by UV–vis spectrophotometry. The polymer called IIP–SDS was synthesised by a double-imprinting process with lead (template) and SDS (template). IIP–SDS was characterised by infrared spectroscopy Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. IIP–SDS showed good recovery for lead (around 82.0%), while the IIP (only lead as template) was 72.2% and non-IIP was 44.9%. Thus, the double-imprinting process for the preconcentration of Pb²⁺ proved to be a more adequate methodology than IIP with a single template. The optimised parameters of sample preparation were washing solvent (2.0 mL of tetrahydrofuran), type and volume of eluent (5 mL of 1 mol L^?1 hydrochloric acid), sample amount (30 mL of water spiked with 10.0 µg mL^?1), amount of IIP–SDS (400 mg) and sample pH (pH = 4.5). Linearity ranged from 10 to 125 µg L^?1 with r > 0.992. The limit of detection and quantification were 6.3 and 10 µg L^?1, respectively. The precision (relative standard deviation, %) and accuracy (relative error, %) were lower than 15%. Finally, IIP–SDS may be an alternative and effective adsorbent for SPE procedures in monitoring of wastewater samples.     

元素周期表实物展窗:元素化学性质的形象化展示

以展示元素单质、化合物和矿物样品为形式制作的元素周期表实物展窗能够形象化地展示各种元素的化学特性。元素周期表实物展窗将实物样品展示度与样品背后的化学内涵相结合,可以展示元素和化学学科的风貌。     

Electrochemical Determination of Lead(II) in Environmental Waters Using a Sulfydryl Modified Covalent Organic Framework by Square Wave Anodic Stripping Voltammetry (SWASV)

A novel sulfhydryl-modified covalent organic framework was designed for the selective determination of lead(II) using square wave anodic stripping voltammetry. The introduction of sulfhydryl groups enhanced the selectivity and sensitivity of the covalent organic framework for analytes. The sulfhydryl-modified covalent organic framework was characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Under the optimized conditions, a sulfhydryl-modified covalent organic framework/gold electrode was successfully used for the determination of lead(II) in water samples. The newly developed square wave anodic stripping voltammetry method exhibited wide linearity (0.05 to 20?ng mL^?1, r?=?0.991), a low limit of detection (0.015?ng mL^?1) and good precision, with a relative standard deviation values <5.1%. The limit of detection was lower than 10?ng mL^?1, the level of lead(II) in drinking water permitted by the World Health Organization. The recoveries of three spiked samples ranged from 90.0% to 104.0%, with relative standard deviations <4.9%. Satisfactory reproducibility and good repeatability demonstrated that the newly developed method is very suitable for the detection of lead(II) in real water samples, with significant advantages over existing methods.     

胶体金修饰电极测定鱼样中组胺的方法研究

基于胶体金修饰的玻碳电极,利用电流～时间曲线法建立了一种简便、灵敏的组胺检测方法。优化了底液的pH值和组胺的电化学测试方法及条件,考察了修饰电极的电化学性能。结果表明,组胺在胶体金修饰电极上的响应电流(-I,μA)与其浓度(c,μmol/L)在0. 1～64μmol/L范围内呈良好的线性关系,检出限为0. 033μmol/L,在带鱼和黄花鱼样品中的加标回收率分别为94. 4%～106%、91. 8%～106%,相对标准偏差分别为3. 2%、2. 5%。该法操作简单、检测速度快、成本低,适用于带鱼和黄花鱼等鱼样中组胺的测定。     

Field‐amplified sample injection combined with capillary electrophoresis for the simultaneous determination of five chlorophenols in water samples

A sensitive method of CZE‐ultraviolet (UV) detection based on the on‐line preconcentration strategy of field‐amplified sample injection (FASI) was developed for the simultaneous determination of five kinds of chlorophenols (CPs) namely 4‐chlorophenol (4‐CP), 2‐chlorophenol (2‐CP), 2,4‐dichlorophenol (2,4‐DCP), 2,4,6‐trichlorophenol (2,4,6‐TCP), and 2,6‐dichlorophenol (2,6‐DCP) in water samples. Several parameters affecting CZE and FASI conditions were systematically investigated. Under the optimal conditions, sensitivity enhancement factors for 4‐CP, 2‐CP, 2,4‐DCP, 2,4,6‐TCP, and 2,6‐DCP were 9, 27, 35, 43, and 43 folds, respectively, compared with the direct CZE, and the baseline separation was achieved within 5 min. Then, the developed FASI‐CZE‐UV method was applied to tap and lake water samples for the five CPs determination. The LODs (S/N = 3) were 0.0018–0.019 µg/mL and 0.0089–0.029 µg/mL in tap water and lake water, respectively. The values of LOQs in tap water (0.006–0.0074 µg/mL) were much lower than the maximum permissible concentrations of 2,4,6‐TCP, 2,4‐DCP, and 2‐CP in drinking water stipulated by World Health Organization (WHO) namely 0.3, 0.04, and 0.01 µg/mL, respectively, and thereby the method was suitable to detect the CPs according to WHO guidelines. Furthermore, the method attained high recoveries in the range of 83.0–119.0% at three spiking levels of five CPs in the two types of water samples, with relative standard deviations of 0.37–8.58%. The developed method was proved to be a simple, sensitive, highly automated, and efficient alternative to CPs determination in real water samples.     

二级热脱附-气相色谱-质谱联用测定大气可吸入颗粒物中的16种多环芳烃

建立了二级热脱附-气相色谱-质谱联用技术测定大气可吸入颗粒物PM10中16种多环芳烃的分析方法。对二级热脱附和色谱-质谱条件进行了优化。实验结果表明,方法的检出限为0.14～0.42 ng/m3,平均加标回收率为52.7%～97.9%,相对标准偏差(RSD)为8.0%～18.4%。与传统方法相比,该方法的样品前处理时间短、有机溶剂的使用量少,是对人体及环境友善的检测技术。该方法已应用于32份实际大气颗粒物样品的分析。     

Determination of 16 polycyclic aromatic hydrocarbons in environmental water samples by solid-phase extraction using multi-walled carbon nanotubes as adsorbent coupled with gas chromatography–mass spectrometry

A solid-phase extraction (SPE) using multi-walled carbon nanotubes (MWCNTs) as adsorbent coupled with gas chromatography–mass spectrometry (GC–MS) method was developed for the determination of 16 polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. Several condition parameters, such as extraction adsorbents, elution solvents and volumes, and sample loading flow rate and volume were optimized to obtain high SPE recoveries and extraction efficiency. 150 mg MWCNTs as sorbent presented high extraction efficiency of 16 PAHs due to the large specific surface area and high adsorption capacity of MWCNTs compared with the commercial C18 column (250 mg/2 mL). The calibration curves of 16 PAHs extracted were linear in the range of 20–5000 ng L⁻¹, with the correlation coefficients (r²) between 0.9848 and 0.9991. The method attained good precisions (relative standard deviation, RSD) from 1.2% to 12.1% for standard PAHs aqueous solutions; method recoveries ranged in 76.0–125.5%, 74.5–127.0%, and 70.0–122.0% for real spiked samples from river water, tap water and seawater, respectively. Limits of detection (LODs, S/N = 3) of the method were determined from 2.0 to 8.5 ng L⁻¹. The optimized method was successfully applied to the determination of 16 PAHs in real environmental water samples.     

Capillary zone electrophoretic determination of tosufloxacin and trovafloxacin in urine

Summary A simple and rapid capillary zone electrophoretic method with UV detection has been developed for determination of tosufloxacin and trovafloxacin. The separation was performed in fused-silica capillaries (57 cm length × 75μm i.d.); the running buffer was 35mm borate + 35mm phosphate buffer solution, pH 8.6, containing 6% (v/v) acetonitrile. The applied potential was 15 kV, the temperature 30°C, and detection was at 262 nm. Piromidic acid was used as the internal standard. Response was linearly dependent on concentration in the range 1.0–120.0 μg mL⁻¹ and the detection limit was 0.2 μg mL⁻¹ for both compounds. The analysis was highly reproducible (RSD between 3.41 and 1.25%). The method was applied to the determination of tosufloxacin and trovafloxacin in human and rat urine. The method was validated by using HPLC as a reference method. Recovery was between 96.8 and 102%.     

Simultaneous Determination of Various Classes of Pesticides Using Micellar Electrokinetic Capillary Chromatographyin Combination with Solid-Phase Extraction

The potential of micellar electrokinetic capillary chromatography (MEKC) with UV-detection for the simultaneous determination of various selected pesticides in water samples was investigated. The developed method using solid-phase extraction showed high efficiency and good resolution with detection limits in the 0.2 to 0.5 ppm range. Comparison of several SPE cartridges demonstrates their suitability for the extraction of pesticides with different hydrophobicity achieving 5000-fold enrichment. The described method involving SPE procedure and MEKC separation enables the successful determination of a wide spectrum of pesticides in water in the range of maximum residue limits (MRLs).     

Application of capillary electrophoresis with different sample stacking strategies for the determination of a group of nonsteroidal anti-inflammatory drugs in the low microg x L(-1) concentration range

Several on-column sample preconcentration modes--large-volume sample stacking using the EOF pump (LVSEP), LVSEP with anion-selective exhaustive injection (LVSEP-ASEI) and field-amplified sample injection with sample matrix removal using the electroosmotic flow (EOF) pump (FAEP)--were used to analyze some nonsteroidal anti-inflammatory drugs (NSAIDs) by capillary electrophoresis, and then compared. Methanol was the background electrolyte solvent to suppress the EOF. The effect of the type and length of the solvent plug, and the sample injection time were investigated in FAEP to determine the conditions that provided the best response. LVSEP, LVSEP-ASEI, and FAEP improved the sensitivity of the peak area by 100-, 1200-, and 1800-fold, respectively. The methodology developed, in combination with solid-phase extraction (SPE), was applied to the analysis of water samples.