对甲苯磺酸正丁铵毛细管色谱柱的制备及性能考察

用动态涂敷法制备了对甲苯磺酸正丁铵玻璃毛细管柱柱１（固定液浓度为７．５％,柱尺寸为３５ｍ×０．３５ｍｍｉ．ｄ．）和柱２（固定液浓度为９．２％,柱尺寸为３５ｍ×０．３０ｍｍｉ．ｄ．）,所用溶剂是丙酮和甲醇（２：１Ｖ／Ｖ）的混合溶剂,并对柱性能进行了考察。结果表明,这种色谱固定相具有较强的极性并对饱和烃、芳香烃、饱和酸、芳香酸、极性异构体等具有良好的分离效果。     

十二烷基苯磺酸锌毛细管气相色谱柱的制备及其用于含氧有机化合物的分析

采用汞塞动态法涂柱以十二烷基苯磺酸锌做为固定相制备了毛细管气相色谱柱 1 (固定液浓度为 9.3%W/V柱尺寸为 2 4m×0 .30mmi.d.) ,所用溶剂是丙酮 ,并且对柱性能进行了考察。实验表明这种色谱柱对C5 C8醇、酮、酯、C2 C8羧酸等具有较好的分离能力 ,尤其对强极性物质如羧酸 ,有独特的分离能力 ,峰形窄而对称 ,即使对痕量的羧酸也可直接做定量分析。     

烯唑醇免疫亲和色谱柱的制备及其在样品前处理中的应用

将四甲氧基硅烷(TMOS)水解后与烯唑醇抗体聚合,采用溶胶-凝胶法合成了烯唑醇免疫亲和色谱(IAC)柱固定相,并用其制备了对烯唑醇具有特异性亲和力的IAC柱。对IAC柱条件进行了优化,选择超纯水作为吸附与平衡介质,30%～50%(体积分数)甲醇水溶液作为洗脱剂。结果表明: 在优化条件下,IAC柱对烯唑醇的动态柱容量达125.4 μg/g。在河水样品和水果样品中添加烯唑醇,经IAC柱净化富集,洗脱液采用高效液相色谱检测,河水中烯唑醇的平均回收率为90.36%～100.14%,相对标准偏差(RSD)为2.03%～6.08%;水果中烯唑醇的平均回收率为85.55%～94.02%, RSD为3.38%～6.78%。本研究为烯唑醇在河水、水果等样品中的残留分析提供了一种新的高效前处理手段。     

柴胡舒肝丸的毛细管电泳指纹图谱及其黄芩苷含量的测定

建立了柴胡舒肝丸(Chaihu Shugan Pill, CHSGP)的毛细管区带电泳指纹图谱(capillary electrophoresis fingerprint, CEFP),并采用内标法测定了黄芩苷的含量。以50 mmol/L硼砂-150 mmol/L磷酸二氢钠-50 mmol/L磷酸氢二钠(1:1:1, v/v/v)(含5 mmol/L庚烷磺酸钠)为背景电解质(BGE)溶液,采用未涂层石英毛细管(总长度75 cm,有效分离长度63 cm,内径75 μm),以色谱指纹图谱分离量指数(RF)为目标函数优化实验条件,在紫外检测波长265 nm、运行电压11 kV条件下,以黄芩苷峰为参照物峰,确定了22个共有指纹峰,建立了CHSGP的CEFP,通过对20批样品聚类分析确定用其中13批生成对照CEFP(RCEFP),以此RCEFP为标准用系统指纹定量法鉴别20批柴胡舒肝丸质量。结果其中的4批化学成分数量和分布比例不合格,4批含量明显偏低,其他12批完全合格。采用内标法测定黄芩苷的含量,在5～200 mg/L范围内线性良好(r=0.9999),平均回收率(n=9)为98.2%。该法具有较好的精密度和重现性,为柴胡舒肝丸的质量控制提供了一种新的参考。     

柱前衍生法在氨基酸分析测定中的应用

介绍了目前柱前衍生法分析氨基酸常用的几类衍生试剂及相应的衍生方法,并且比较了各类柱前衍生试剂的优缺点,对近期氨基酸分离分析中的色谱检测方法做了系统综述。     

经典一维装箱问题近似算法的研究进展

自20世纪70年代开始,随着计算复杂性理论的建立,近似算法逐渐成为组合优化的重要研究方向。作为第一批研究对象,装箱问题引起了组合优化领域学者的极大关注。装箱问题模型简单、拓展性强,广泛出现在各种带容量约束的资源分配问题中。除了在物流装载和材料切割等方面愈来愈重要的应用外,装箱算法的任何理论突破都关乎到整个组合优化领域的发展。直到今天,对装箱问题近似算法的研究仍如火如荼。本文主要针对一维模型,简述若干经典Fit算法的发展历程,分析基于线性规划松弛的近似方案的主要思路,总结当前的研究现状并对未来的研究提供一些参考建议。     

A fixed-parameter-tractable algorithm for set packing

1. IntroductionIt is a useful and challenging task to find efficient algorithms for many computationalhard problems. Recently, the research on Fixed-Parameter nactable Theory arouses muchinterest. FOr example, different fixed- p ax amet er- t rac t ab le- algori t hms for many well- knowndecisio11 pruble11ls illc1udi11g 3-dimellsio11al IIlatchiIlg: a11d vertex--cover Problen1 have beenPrese11ted in [1 8]. Jia11er Chen, DoIlald K. FYiesen al1d Weijia Jia proPosed a coll1pletelynew appro…     

斜角入射沉积法制备渐变折射率薄膜的折射率分析

斜角入射沉积法是一种制备薄膜的新颖方法,它可以用来制备渐变折射率薄膜.本文首先探讨了膜料的沉积入射角为α,薄膜柱状生长倾斜角为β时的薄膜的填充系数;之后利用drude理论,分析研究了斜角入射沉积法制备渐变折射率薄膜的折射率与薄膜的入射角和生长方向的关系. 关键词： 斜角入射沉积 渐变折射率 填充系数     

End-capped Thiophene Modulated Molecular Packing in 2,8-Dibenzothiophene-based Materials：from Face-to-face to Edge-to-face Stacking

Two new organic crystals of 2,8-bisthienyldibenzothiophene(BTDT) and 2,8-bis-dithienyldibenzothiophene(BDTDT) compounds were successfully obtained.The change of end-capped group from thiophene to dithiophene causes big differences in molecular packing and carrier-transport property.The adjacent molecules of compound BTDT adopt face-to-face π stacking and exhibit two-dimensional interchain interactions.On the contrary,BDTDT molecules are arranged in an edge-to-face motif and show mainly one-dimensional interacting character.The packing mode exerts dramatic effect on the carrier-transport property.The crystal of BTDT belongs to the orthorhombic system,space group P21212 with a = 20.1427(11),b = 4.6016(3),c = 8.6340(5) ,V = 800.27(8) 3,Z = 2,Dc = 1.446 g/cm3,F(000) = 360,S = 1.019,the final R = 0.0491 and wR = 0.0960 for 1605 reflections with I > 2σ(I).The crystal of BDTDT belongs to the orthorhombic system,space group P212121 with a = 7.2636(15),b = 25.359(5),c = 25.359 ?,V = 4670.9(14) ?3,Z = 8,Dc = 1.458 g/cm3,F(000) = 2112,S = 0.880,the final R = 0.0597 and wR = 0.1318 for 8047 reflections with I > 2σ(I).     

Influence of cell packing by centrifugation on 40-MHz ultrasound backscatter

High-frequency ultrasound (HFUS) signals backscattered from RBL-2H3 cell pellets prepared under different centrifugal forces were analyzed to investigate the packing effect of cell aggregates. The measurements were performed in a pulse-echo setup with a 40-MHz transducer. The changes of ultrasound signals from cell pellet in backscattered power, statistical parameter, and pellet thickness were monitored after centrifugation at between 100g and 1600g. Experimental results showed that the HFUS backscattered power from cell pellets was inversely proportional to centrifugal force and increased to a plateau within 1-2 h after centrifugation. The initial thickness of cell pellets decreased with higher centrifugal force, but the changes in thickness and time that took to reach a plateau increased at higher centrifugal force. The envelope statistics of backscattered signals with Nakagami distribution indicates that the centrifugal force and elapsed time after centrifugation affected the backscattering characteristics. The present study suggests that centrifugal force and data acquisition time after cell pellet formation should be considered in in vitro cell packing method with centrifugation to emulate the tissue in vivo.