模差渐进投影法解析重叠色谱峰

提出了一种鉴别重叠色谱峰类型的化学计量学方法——模差渐进投影(MDEP)法。该方法利用二维色谱数据中相邻两个色谱流出点的光谱矢量模的和与该两个矢量和的模之差,建立模差-时间(dm-t)曲线判断非纯色谱峰的纯组分区,同时判定第二组分色谱流出点和倒数第二组分色谱结束点。分别以纯组分区的光谱矢量建立正交阵对该色谱峰进行投影运算,得到投影后转换色谱。该转换色谱消除了纯组分区所对应化合物的色谱和光谱信息。对转换色谱重复上述操作至整个色谱峰的模差-时间曲线均为0时终止,得到重叠色谱峰各组分的色谱流出点和结束点。利用上述结果,采用不包含待测组分光谱信息的该重叠峰二维色谱数据建立正交矩阵对该色谱峰进行投影运算,获得待测组分的相似色谱图。通过比对分析即可得到该组分在重叠色谱峰中的光谱和色谱信息。依次操作,即可获得重叠色谱峰中各组分的光谱和色谱信息。采用模差渐近投影法对4组分模拟重叠二维色谱峰及杜香挥发油GC-MS的重叠色谱峰进行了解析,方法简便、结果准确。     

原子转移自由基聚合技术用于以单分散树脂为基质的温敏色谱固定相的制备及性能评价

以α-溴异丁酰溴为引发剂,CuCl/CuCl2/2,2′-联二吡啶(Bpy)为催化体系,在室温条件下通过原子转移自由基聚合(ATRP)使N-异丙基丙烯酰胺(NIPAM)键合在单分散交联聚甲基丙烯酸环氧丙酯树脂（PGMA/EDMA 树脂）表面,制备了具有温敏性的聚合物色谱填料,并用元素分析、红外光谱等对其进行了表征;详细考察了该填料对芳香烃化合物的分离性能、温敏性能、稳定性和重现性。元素分析得出NIPAM单体的接枝率为10.4%;通过改变温度,可以有效地分离对羟基苯甲醛、邻甲酚和4-丁基苯胺3种混合物。结果表明,所合成的固定相具有很好的色谱性能和温敏性能,稳定性和重现性良好。     

溶胶凝胶固定化酶流动注射化学发光法测定人体血清中的胆固醇

采用溶胶凝胶技术分别固定了胆固醇脂酶和胆固醇氧化酶,制成固定化酶柱;人体血清中胆固醇脂在胆固醇脂酶的催化作用下生成胆固醇,胆固醇在胆固醇氧化酶的催化作用下被氧化产生H2O2,将其与鲁米诺发生耦合的化学发光反应,在模拟酶血红蛋白的催化作用下产生较强的化学发光。结合流动注射技术,建立了溶胶凝胶固定化酶流动注射化学发光法测定胆固醇的新方法。实验发现,发光强度与胆固醇的浓度在一定范围内呈良好的线性关系,总胆固醇的线性范围为1.01×10-6～2.02×10-4mol/L(r=0.9975);检出限为7.5×10-7mol/L;游离胆固醇的线性范围为5.0×10-8～2.18×10-5mol/L(r=0.9991);检出限为5.0×10-9mol/L。用生化分析仪(东芝TBA-120FR)与本方法进行对照,两种方法无显著性差异。本方法已应用于临床血清样品中胆固醇的检测。     

烯丙基-β-环糊精基手性毛细管电色谱整体柱的一步法制备及其性能

以烯丙基-β-环糊精、甲基丙烯酸缩水甘油酯和乙二醇二甲基丙烯酸酯为功能单体,一步键合制备了环糊精聚合物毛细管整体柱.在电色谱模式下18种氨基酸对映体得到成功分离.研究发现,将修饰的环糊精衍生物作为功能单体制备出的毛细管整体柱对疏水性,含氨基和苯环的手性化合物具有良好的保留行为,并具有良好的稳定性和重现性.新型电色谱柱也被应用于手性药物的分离.     

Characterization of Ascentis RP-Amide column: Lipophilicity measurement and linear solvation energy relationships

This study investigates lipophilicity determination by chromatographic measurements using the polar embedded Ascentis RP-Amide stationary phase. As a new generation of amide-functionalized silica stationary phase, the Ascentis RP-Amide column is evaluated as a possible substitution to the n  -octanol/water partitioning system for lipophilicity measurements. For this evaluation, extrapolated retention factors, log k^′_w$\text{log}{k^{\prime }}_w$, of a set of diverse compounds were determined using different methanol contents in the mobile phase. The use of n-octanol enriched mobile phase enhances the relationship between the slope (S  ) of the extrapolation lines and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (the intercept of the extrapolation), as well as the correlation between log P   values and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (1:1 correlation, r² = 0.966). In addition, the use of isocratic retention factors, at 40% methanol in the mobile phase, provides a rapid tool for lipophilicity determination. The intermolecular interactions that contribute to the retention process in the Ascentis RP-Amide phase are characterized using the solvation parameter model of Abraham. The LSER system constants for the column are very similar to the LSER constants of the n-octanol/water extraction system. Tanaka radar plots are used for quick visual comparison of the system constants of the Ascentis RP-Amide column and the n-octanol/water extraction system. The results all indicate that the Ascentis RP-Amide stationary phase can provide reliable lipophilic data.     

Design and implementation of an array of micro-electrochemical detectors for two-dimensional liquid chromatography—Proof of principle

Simultaneous two-dimensional liquid chromatography (2D-LC) is an implementation of two-dimensional liquid chromatography which has the potential to provide very fast, yet highly efficient separations. It is based on the use of time × space and space × space separation systems. The basic principle of this instrument has been validated long ago by the success of two-dimensional thin layer chromatography. The construction of a pressurized wide and flat column (100 mm × 100 mm × 1 mm) operated under an inlet pressure of up to 50 bar was described previously. However, to become a modern analytical method, simultaneous 2D-LC requires the development of detectors suitable for the monitoring of the composition of the eluent of this pressurized planar, wide column. An array of five equidistant micro-electrochemical sensors was built for this purpose and tested. Each sensor is a three-electrode system, with the working electrode being a 25 μm polished platinum micro-electrode. The auxiliary electrode is a thin platinum wire and the reference electrode an Ag/AgCl (3 M sat. KCl) electrode. In this first implementation, proof of principle is demonstrated, but the final instrument will require a much larger array.     

The synthesis of chloropropyl-functionalized silica hybrid monolithic column with modification of N,N-dimethyl-N-dodecylamine for capillary electrochromatography separation

A chloropropyl-functionalized silica (CP-silica) hybrid monolithic column was synthesized within the confines of a capillary via the sol–gel process using tetramethoxysilane (TMOS) and (3-chloropropyl)-trimethoxysilane (CPTMS) as the precursors. The resulting CP-silica hybrid monolith inside the capillary showed homogeneous macroporous morphology and was well attached to the inner wall of the capillary. The obtained CP-silica hybrid monolithic capillary column demonstrated the inherent hydrophobic property and could be applied as a reversed-phase stationary phase in CEC directly. Due to the great chemical reactivity of the incorporated chloro groups on the hybrid silica monolithic matrix, the chloropropyl moieties on the surface of the hybrid silica monolith matrix could be conveniently further modified by a tertiary amine of N,N-dimethyl-N-dodecylamine (DMDA) via the nucleophilic substitution reaction at 70 °C to introduce a dodecyl groups (C12) onto the CP-silica hybrid monolithic matrix. The resulting C12-silica hybrid monolithic column not only demonstrated the significantly enhanced hydrophobic property in the separation of alkylbenzenes in reversed-phase capillary electrochromatography (RP-CEC), but also the strong electroosmotic flow (EOF) in a wide pH range. Five alkylbenzenes could be baseline separated in 3 min with column efficiency ranging from 189 700 to 221 000 N/m with a 70% ACN running buffer in CEC.     

硅胶整体柱的制备及制备条件对整体柱的影响

研究了硅胶整体柱的制备工艺及温度、pH对凝胶化过程的影响,探讨了不同的四甲氧基硅烷／聚乙二醇比例、不同制也剂浓度对柱结构的影响,以及不同焙烧温度和酸活化处理方法对柱体Si0H含量和线性收缩率的影响,由此确定最佳制备条件。结果表明,采用改进的溶胶-凝胶工艺制备的硅胶整体柱,无开裂变形现象;不同制备条件,可以产生具有不同微米级鞍形骨架、微米级大孔和纳米级中孔的整体柱,可适合不同物质的分离和分析。     

Rapid and high-resolution analysis of geometric polyprenol homologues by connected octadecylsilylated monolithic silica columns in high-performance liquid chromatography

A Chromolith Performance octadecylsilyl (ODS) monolithic silica column (Merck) was compared with a conventional microparticulate ODS-bonded silica column in the high-performance liquid chromatography separation of natural polyprenols. A system comprising two connected monolithic columns afforded an equivalent separation at half the analysis time of the conventional method. Furthermore, ten connected columns achieved a tremendously high-resolution separation, in which the complicated series of homologous polyprenols with geometric isomerism were fully separated.     

Separation of fatty acid methyl esters by comprehensive two-dimensional supercritical fluid chromatography with packed columns and programming of sampling duration

Fatty acid methyl esters from various fats and oils were separated by comprehensive two-dimensional supercritical fluid chromatography with conventional packed columns and FID detection. The first dimension was a silica gel column and the second dimension was an ODS column. This combination was largely orthogonal for the separation of fatty acid methyl esters. The first dimension separations were primarily based on the number of double bonds while the second dimension separations were based on the chain length. The highly-ordered chromatograms and improved resolution allowed the easy detection and identification of minor components. Although the first dimension separations were performed under isobaric conditions where the peak width increased in proportion to the retention, the programming of the sampling duration allowed us to maintain the optimum re-injection frequency (3–4 times) per peak into the second dimension and so to minimize the total analysis time without deteriorating the resolution.