Antibacterial and Miscibility Properties of Chitosan/Collagen Blends

The miscibility, bioactivity, and antibacterial properties of chitosan/collagen specimens were systematically studied. The specimens were prepared by blending collagen and chitosan with varying deacetylation degrees in solutions; the collagen molecules had been extracted from pigskins using the acid swelling-pepsin digestion method. To understand the miscibility properties of collagen and chitosan molecules, the intrinsic viscosity and differential scanning calorimetry analysis of collagen, chitosan, and collagen/chitosan specimens were performed. The instrinsic viscosity measurements suggested that chitosan and collagen molecules with varying deacetylation degrees were miscible at molecular level for all compositions and degrees of deacetylation of chitosan/collagen mixture solutions prepared in this study. Fourier transform infrared analyses suggested that the percentage of preserved triple helix structures present in collagen molecules in collagen/chitosan specimens decreased with increasing chitosan contents, since the ratios of peak absorbance at 1239 cm^?1 of amide III and 1455 cm^?1 of C?H bending of collagen/chitosan specimens decreased significantly with increase in their chitosan contents. Abnormally high denaturation temperatures (T_d) were observed as the chitosan contents of collagen/chitosan specimens reached 40 wt%, at which T_d of collagen molecules was even higher than that of the corresponding pure chitosan molecules with varying deacetylation degrees. The antibacterial activity of collagen/chitosan blends increased consistently with increasing deacetylation degrees and concentrations of chitosan molecules in collagen/chitosan solutions. Possible explanations for these interesting thermal denaturation, antibacterial, and miscibility properties of chitosan/collagen specimens are reported.     

Investigation of damaged interior walls using synchrotron‐based XPS and XANES

Evidence of internal sulfate attack in field exposure was demonstrated by the damaged interior wall of a three‐year‐old house situated in Nakhon Ratchasima Province, Thailand. Partial distension of the mortar was clearly observed together with an expansion of a black substance. Removal of the black substance revealed a dense black layer. This layer was only found in the vicinity of the damaged area, suggesting that this black material is possibly involved in the wall cracking. By employing synchrotron‐based X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near‐edge structure (XANES) techniques, the unknown sample was chemically identified. The S 2p and O 1s XPS results mutually indicated the existence of sulfate species in the materials collected from the damaged area. The XANES results indicated the presence of ferrous (II) sulfate, confirming sulfate‐induced expansion and cracking. The sulfate attack in the present case appeared to physically affect the structure whereas the chemical integrity at the molecular level of the calcium silicate hydrate phase was retained since there was a lack of spectroscopic evidence for calcium sulfate. It was speculated that internal sulfate probably originated from the contaminated aggregates used during the construction. The current findings would be beneficial for understanding the sulfate‐attack mechanism as well as for future prevention against sulfate attack during construction.     

环丙沙星在胶束体系中的荧光特性研究及应用

研究了环丙沙星在胶束体系中的荧光性质，发现十二烷基硫基酸对环丙沙星有较强的增敏作用。据此建立了胶束增敏荧光光谱法测定痕量环丙沙星的新方法，经样品测定，其线性范围为0．033－0．60μg.mL^-1，检出限为0．033μg.mL^-1，回收率为94．0％－98．1％相对标准偏差为1．5％－2．8％。     

The corrosion properties of phosphate coating on AZ31 magnesium alloy: The effect of sodium dodecyl sulfate (SDS) as an eco-friendly accelerating agent

Sodium nitrite has been used as an accelerating agent in phosphating bath to improve its properties. However, it is well known that sodium nitrite is a carcinogenic component in phosphating sludge. In this study, it has been aimed to replace sodium nitrite by an environmentally friendly accelerating agent. To this end, sodium dodecyl sulfate (SDS) was used in phosphating bath to improve the phosphate coating formation on an AZ31 magnesium alloy. The effect of SDS/sodium nitrite ratio on the phosphated samples properties was also studied. Using field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), direct current (DC) polarization and electrochemical impedance spectroscopy (EIS) the properties of phosphated magnesium samples were studied.Results showed uniform phosphate coating formation on the magnesium sample mostly in hopeite phase composition. In addition, a denser and less permeable coating can be obtained at these conditions. The corrosion resistance of the phosphated samples was superiorly improved using higher SDS concentration in the phosphating bath.     

烷基硫酸盐表面张力的量子化学研究

用AMl量子化学计算法优化了十三烷基硫酸根阴离子和——CH3在不同取代位的十二烷基硫酸根阴离子的几何构型，得到最优构型时最高占据分子轨道能级EHOMO、最低空轨道能级ELUMO、电子能量Eele和偶极矩μ等数据．将这些电子结构数据分别与表面张力相拟合，得到很好的相关性。文中讨论了——CH3在不同位置取代对表面张力的影响。     

A Raman spectroscopic study of copiapites Fe2+Fe3+(SO4)6(OH)2 · 20H2O: environmental implications

Raman spectroscopy has been used to study selected mineral samples of the copiapite group. Copiapite (Fe²⁺Fe³⁺(SO₄)₆(OH)₂ · 20H₂O) is a secondary mineral formed through the oxidation of pyrite. Minerals of the copiapite group have the general formula AFe₄(SO₄)₆(OH)₂ · 20H₂O, where A has a + 2 charge and can be either magnesium, iron, copper, calcium and/or zinc. The formula can also be B_2/3Fe₄(SO₄)₆(OH)₂ · 20H₂O, where B has a + 3 charge and may be either aluminium or iron. For each mineral, two Raman bands are observed at around 992 and 1029 cm⁻¹, assigned to the (SO₄)²⁻ν₁ symmetric stretching mode. The observation of two bands provides evidence for the existence of two non‐equivalent sulfate anions in the mineral structure. Three Raman bands at 1112, 1142 and 1161 cm⁻¹ are observed in the Raman spectrum of copiapites, indicating a reduction of symmetry of the sulfate anion in the copiapite structure. This reduction in symmetry is supported by multiple bands in the ν₂ and ν₄(SO₄)²⁻ spectral regions. Copyright © 2010 John Wiley & Sons, Ltd.     

两亲性壳聚糖基聚合物碳点的合成及其在载药方面的应用

通过水热法合成了系列具有高荧光量子产率（42.9%）辛基化壳聚糖基两亲性聚合物碳点荧光材料。利用红外光谱、紫外吸收光谱、光电子能谱、透射电镜、X射线衍射及荧光光谱对聚合物碳点进行了表征。以阿霉素为模型药物,研究了聚合物碳点对阿霉素的载药性能。当辛基取代度为76.42%时,其最大载药量和包封率分别为49.6%与47.4%。在磷酸盐缓冲液中,载药纳米胶束呈前期快速释放,后期缓慢释放的双相特征。将载药纳米胶束与鼻咽癌细胞作用,发现其存活率随着载药纳米胶束加入量的增加而降低,说明该纳米胶束对鼻咽癌细胞有一定的抑制作用。总之,该聚合物碳点材料在药物载体与荧光示踪方面有潜在的应用价值。     

叶酸-O-羧甲基壳聚糖的制备与光谱分析

壳聚糖经羧甲基化制备出的O-羧甲基壳聚糖,采用离子交联法与叶酸复合制备出叶酸-O-羧甲基壳聚糖复合物。通过红外光谱、X射线衍射光谱、扫描电镜等测试手段进行表征,探讨了叶酸、O-羧甲基壳聚糖的质量比对复合物结构及性能的影响,利用断尾取血法探究复合物的凝血、止血性能。结果显示,叶酸-O-羧甲基壳聚糖凝血、止血效果显著。当叶酸与O-羧甲基壳聚糖的质量比为2∶5时,二者基团的作用力最强,复合物结构最稳定,凝血、止血效果最好。     

壳聚糖基聚合物点荧光材料的合成及其对纸张的抗紫外老化性能

以壳聚糖、柠檬酸、N-(2-羟乙基)乙二胺为原料,通过水热法合成了壳聚糖基聚合点(P(CS-g-CA)Ds)荧光材料,发现柠檬酸的接枝可明显提高壳聚糖聚合物点的量子产率。对P(CS-g-CA)Ds进行了红外光谱、紫外光谱、光电子能谱、透射电镜、热分解性能及光致发光光谱表征,测试了不同p H值下的荧光强度。结果表明,P(CS-g-CA)Ds在p H=4~12范围内有良好的稳定性。通过测试紫外老化前后宣纸的羰基指数和乙烯基指数研究了P(CS-g-CA)Ds在宣纸中的应用,结果表明其具有良好的抗紫外老化性能。     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.