A novel method for the synthesis of the PEG-crosslinked chitosan with a pH-independent swelling behavior

In this study, a simple method was developed to crosslink chitosan using poly(ethylene glycol) (PEG) with different molecular weights. Crosslinking of chitosan was confirmed by various spectral analyses. The differential scanning calorimetric (DSC) study indicated that the rigid crystalline structure of chitosan was decreased after crosslinking with PEG. The PEG-crosslinked chitosan (PEG-Ch) showed a pH-independent swelling behavior: swelled in both the simulated stomach (pH 1.1) and intestinal (pH 7.4) solutions. The swelling ratio of PEG-Ch increased significantly with a higher molecular weight of PEG used. In contrast, chitosan dissolved completely in a simulated stomach solution and showed a comparatively less swelling in a simulated intestinal solution. Thus, the prepared PEG-Ch could be a better biomaterial than chitosan in the development of orally sustained drug-delivery devices.     

聚氧硫杂蒽树脂固化特性及其动力学的研究

以DSC、TG等技术手段研究了聚氧硫杂蒽树脂 (POSPF)的固化特性及其动力学 .结果表明 ,用六次甲基四胺 间二氯苄作固化剂 ,加热至 10 5～ 2 2 5℃能使POSPF树脂固化 ,在固化过程树脂中的活性羟甲基和固化剂参与反应生成亚甲基桥从而形成网状体型结构 ;动态DSC曲线上出现宽的固化放热峰 ,用T β外推法确定其凝胶温度Ti=10 0 0℃、固化温度Tp=181 5℃、后固化温度Tf=2 2 5 7℃ .固化后树脂具有优良的耐热性 ,失重 5 %时热分解温度高达 4 0 3℃ .     

KINETIC MODELING OF ESTERIFICATION OF EPOXY RESIN IN THE PRESENCE OF TRIPHENYLPHOSPHINE FOR PRODUCING VINYL ESTER RESIN: MECHANISTIC RATE EQUATION

Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.     

丙烯酸Fe3+型树脂在非水介质中对鞣酸的配位吸附及洗脱性能

将Fe3 载于丙烯酸树脂上,制备了在非水介质中对鞣酸具有良好吸附性能的配位吸附树脂.在甲醇中,树脂对鞣酸的吸附符合Langmuir单分子层吸附模型,静态饱和吸附量为34mg/g,吸附为粒扩散控制过程.动态吸附中,树脂对鞣酸的泄漏吸附量为25mg/g,饱和吸附量32mg/g.采用5%的甲胺乙醇溶液作洗脱剂,洗脱率95%.树脂在吸附及洗脱过程中未见Fe3 脱落.     

蒙旦树脂化学组成的研究

采用阴离子交换色谱和硅胶－氧化铝柱色谱对云南寻甸蒙旦树脂（ＸＤＳＺ）、潦浒蒙旦树脂（ＬＨＳＺ）、昭通蒙旦树脂（ＺＴＳＺ）和吉林舒兰蒙旦树脂（ＳＬＳＺ）进行了族组分的分离。树脂游离酸，树脂结合酸，树脂烃和树脂醇在各树脂中的百分含量分别为ＸＤＳＺ１１．８６，８．７６，１２．３０，４５．９９；ＬＨＳＺ１５．８９，１３．９１，４．９０，４５．９９；ＳＬＳＺ２５．４６，８．０７，１７．４０，３６．２２；ＺＴ     

Preparation and properties of sclerotium rolfsii invertase immobilized on indion 48-R

Crude extracellular invertase fromSclerotium rolfsii, when coupled to glutaraldehyde activated Indion 48-R, retained 70–80% activity of the soluble enzyme. Immobilization resulted in a decrease in the pH and temperature optima but it increased the temperature stability. K_m and V_max also increased as a result of immobilization. Both soluble and immobilized invertase showed inhibition at high substrate concentrations. The bound enzyme showed excellent stability to repeated use and retained approx 90% of its initial activity after 8 cycles of use.     

偶联剂对钛酸钾晶须/双马来酰亚胺树脂摩擦磨损性能的影响

研究了不同偶联剂及钛酸钾晶须添加量对钛酸钾晶须 /双马来酰亚胺树脂复合材料的摩擦磨损性能的影响 .结果发现 ,钛酸钾晶须能明显提高复合材料的耐磨性 ,晶须的加入使材料的磨损率得到显著降低 ;钛酸钾晶须对材料具有一定的润滑性 ,添加晶须后材料的摩擦系数与树脂基体基本相当 ;偶联剂对复合材料的摩擦系数影响不大 ,但是合适的偶联剂对材料耐磨性的提高则具有明显的作用 .晶须添加量较低时 ,复合材料的磨损机理主要为较严重的粘着磨损 ,晶须添加量较高时 ,疲劳磨损占主导地位 .     

Water‐Soluble N‐(n‐Fatty acyl)chitosans

Chitosan was partially N‐acylated by treatment with n‐fatty acid anhydrides in a homogeneous solution in 2 vol.‐% aqueous acetic acid‐methanol (1:2 v/v). The degree of substitution (d.s.) for N‐acyl groups in the water‐soluble N‐acylchitosan derivatives was in the range of 0.42–0.82 for N‐acetyl, 0.37–0.76 for N‐propionyl, 0.52–0.71 for N‐butyryl and 0.54–0.64 for N‐pentanoyl and ca. 0.58 for N‐hexanoyl, respectively.

Water soluble N‐(n‐fatty acyl)chitosans.     

含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

柠檬酸在D354树脂上的离子交换研究

研究了大孔型弱碱性阴离子交换树脂Ｄ３５４分离水中柠檬酸的相平衡和动力学。Ｌａｎｇｍｕｉｒ方程能够良好地关联等温线。建立了离子交换过程的孔扩散模型，并以正交配置法与Ｇｅａｒ法结合进行数据拟合。结果表明，液膜阻力对交换过程具有重大影响，简单线性推动力模型能够很好地描述液膜传质过程。