Resolution of lymphocyte subpopulations derived from rat spleen by polyamine-graft-PHEMA copolymer

The retention behavior of lymphocyte subpopulations, B cell, T cell and null cell, derived from rat spleen to polyamine-graft-poly(2-hydroxyethyl methacrylate) copolymer (HA) surface was investigated, focusing on the conformational transition of the polyamine side chain as well as the protonation of amino groups in the polyamine grafts. Furthermore, the availability of HA was discussed as a column adsorbent for separation of lymphocyte subpopulations derived from spleen. The conformational transition of polyamine grafts significantly influenced the mode of retention of lymphocyte subpopulations. When polyamine grafts existed in an aggregated conformation (protonatin degree α < 0.5), the retention of lymphocyte subpopulations was decreased in the order B cell> null cell> T cell. On the other hand, when polyamine existed in an extended conformation into the aqueous interior from the matrix interface (α > 0.5), T cell retention became greater than null cell retention, resulting in a decreased B cell> T cell> null cell order. These results indicate that the differential retention of spleen lymphocyte subpopulations is attributed to their differential responses to the change in matrix interface accompanied by the protonation of amino groups. Furthermore, spleen lymphocytes were compared with lymph node lymphocytes in terms of resolution efficacy by an HA copolymer column.     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

手性液晶掺杂剂（S）—4‘—辛氧基—4—（2—酰氧基—丙氧基）联苯的合成

手性液晶掺杂剂（Ｓ）┐４┐辛氧基┐４┐（２┐酰氧基┐丙氧基）联苯的合成马汝建李培荣国斌＊（华东理工大学化学系上海２００２３７）关键词铁电液晶材料，手性液晶掺杂剂，合成，手征性１９９７－０２－０３收稿，１９９７－０８－０７修回铁电液晶显示器所用的材料...     

Chiral separation of 1,1'-bi-2-naphthol and its analogue on molecular imprinting monolithic columns by HPLC

Two molecular imprinting polymer (MIP) monolithic columns with (S)-(-)-1,1'-bi-2-naphthol and (R)-(+)-5,5',6,6',7,7',8,8'-octahydro-1,1'-bi-2-naphthol as the templating molecules, respectively, have been prepared by in situ polymerization using 4-vinylpyridine and ethylene dimethacrylate as functional monomer and cross-linker, respectively. The columns with good flow-through properties were obtained by changing the molar ratio of the functional monomer and the template molecule. The effects of mobile-phase composition on separation of enantiomers were systematically investigated. The results indicate that hydrophobic interaction in aqueous solution and hydrogen-bonding interaction in ACN between the enantiomers and polymers could play important roles in the retention and resolution. The effects of chromatographic conditions, such as flow rate, column temperature, sample loading, on the enantioseparation were also studied. Further, these two MIP columns show a cross-reactivity.     

Preparation and characterization of silica—polyimide composite membranes coated on porous tubes for CO2 separation

Silica-polyimide microcomposite membranes were prepared on γ-alumina-coated α-alumina support tubes, and their gas permeation properties were evaluated with He, N₂ and CO₂. Smoothing of the substrate surface and hybridization of silica and polyamic acid were both effective to form defect-free thin composite membranes. The CO₂ permeance of a membrane with a silica content of 68 wt% was one order of magnitude higher than that of a polyimide membrane having the same thickness. The permselectivity of CO₂ to N₂ was 30 at 30°C and 13 at 100°C. Contributions of the silica and polyimide phases to permeance of the composite membrane were analyzed with a two-phase permeation model. The effective thickness of the rate-controlling polyimide phase was less than one-tenth of the total thickness of the silica-polyimide membrane.     

Stable silica gel-bound crown ethers. Selective separation of metal ions and a potential for separations of amine enantiomers

Silica gel-bound crown ethers and aza macrocycles have been synthesized with the attaching arm connected to the carbon framework of the macrocycles. The interactions of these bound macrocycles with cations are almost identical to those involving the analogous free macrocycles. This has allowed for predictable cation separation, concentration, and removal processes to be performed on a small scale. Quantum mechanical calculations and NMR measurements indicate that similarly bound chiral macrocycles will be capable of use in separating chiral organic amines.Dedicated to the memory of Professor James J. Christensen who died on 5 September 1987.     

氰戊菊酯立体异构体在手性键合相上的分析

本文介绍了采用高效液相色谱法在(R)-N-3,5-二硝基苯甲酰苯甘氨酸手性键合相上氰戊菊酯的四个立体异构体的分离,以外消旋氰戊菊酯样品为参照,计算了光学活性氰戊菊酯样品的四个立体异构体的百分含量,确定了在手性键合相上氰戊菊酯四个立体异构体构型的流出顺序为SR→RS→SS→RR。     

Systematic optimization of micellar electrokinetic chromatographic separation of flavonoids

Summary A simple and rapid systematic optimization scheme was described for the micellar electrokinetic chromatographic separation of a group of flavonoids. The scheme employed an interpretative optimization approach to predict the optimum conditions for the separation of a group of flavonoids by micellar electrokinetic chromatography. By performing a set of nine pre-planned experiments conducted over the maximum working range for the system, global optimum separation conditions could be determined. To validate the optimization procedure, additional experiments were performed using the optimum experimental conditions derived from the optimization scheme. The results showed that satisfactory separation of all the peaks could be obtained. In addition, the application of the method in micropreparative micellar electrokinetic chromatography of the flavonoids was demonstrated.     

Adsorption separation of terpene lactones from Ginkgo biloba L. extract using glass fiber membranes modified with octadecyltrichlorosilane

In this study porous glass fiber membranes were modified by reaction with octadecyl-trichlorosilane to form C18 hydrophobic membranes. The contact angle and the CH2 vibration bands at 2855 and 2920 cm(-1) found by FTIR measurements verified the successful immobilization of C18 groups on the glass fiber membranes. The resulting C18 hydrophobic membranes were used to adsorb terpene lactones from crude Ginkgo biloba L. extracts. In batch adsorption processes, the modified C18 membranes exhibited a better adsorption performance than commercial C18 solid phase extraction adsorbents. Different desorption solvents were tested and ethyl acetate was found to preferentially desorb terpene lactones from the modified C18 membranes. In flow adsorption experiments at 1 mL/min, terpene lactone contents higher than 6 wt% (the standardized content) could be achieved in the elution step using ethyl acetate.     

Reversible Full‐Range Color Control of a Cholesteric Liquid‐Crystalline Film by using a Molecular Motor

By using a chiral molecular motor as a dopant in a cholesteric liquid‐crystalline film, fully reversible control of the reflection color of this film across the entire visible spectrum is possible. The large difference in helical twisting power between the two isomeric forms of the motor allows efficient light‐ and heat‐induced switching of the helicity of the cholesteric liquid‐crystal superstructure.