Solution‐processable transmissive‐to‐green switching electrochromic polyamides bearing 2,7‐bis(diphenylamino)naphthalene units

A new 2,7‐bis(diphenylamino)naphthalene‐based diamine monomer, N,N′‐bis(4‐aminophenyl)‐N,N′‐bis(4‐methoxyphenyl)‐2,7‐naphthalenediamine, was synthesized and polymerized with various aromatic dicarboxylic acids via the phosphorylation polyamidation reaction leading to a new series of redox‐active and electrochromic aromatic polyamides. The polyamides exhibited high solubility in many polar aprotic solvents, good film‐forming ability, and high thermal stability. They also showed stable electrochemical stability and anodically green coloring when oxidized. The two arylamino centers showed a weak electronic interaction via the 2,7‐naphthalenediyl bridge, and thus they started to oxidize almost at the same time. No intervalence charge transfer (IVCT) absorption was observed during the oxidation processes of these polyamides. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1409–1421     

Gas Storage in Porous Molecular Materials

Molecules with permanent porosity in the solid state have been studied for decades. Porosity in these systems is governed by intrinsic pore space, as in cages or macrocycles, and extrinsic void space, created through loose, intermolecular solid-state packing. The development of permanently porous molecular materials, especially cages with organic or metal–organic composition, has seen increased interest over the past decade, and as such, incredibly high surface areas have been reported for these solids. Despite this, examples of these materials being explored for gas storage applications are relatively limited. This minireview outlines existing molecular systems that have been investigated for gas storage and highlights strategies that have been used to understand adsorption mechanisms in porous molecular materials.     

Spectroscopic and X‐ray structural characterization of new polymeric organotin(IV) carboxylates and their in vitro antifungal activities: Part II

The reactions of R₃SnCl (R = Me, Bu or Ph) with sodium 4‐phenylbutyrate, Na(OPh^b), in EtOH yielded three polymeric triorganotin carboxylates, namely [R₃Sn(OPh^b)]_n (R = Me ( 1 ), Bu ( 2 ) or Ph ( 3 )). All complexes were spectroscopically characterized using Fourier transform infrared, ¹¹⁹Sn Mössbauer, ¹H NMR, ¹³C{¹H} NMR and ¹¹⁹Sn{¹H} NMR spectral techniques. In addition, the crystal structures of 1 and 3 were determined using single‐crystal X‐ray diffraction. Their polymeric structures are sustained by bridging carboxylates which connect two five‐coordinate Sn(IV) centres. Each metallic cation displays a distorted trigonal bipyramidal coordination geometry (Addison's parameters ranging from 0.84 in 1 to 0.77–0.91 in 3 ), with the oxygen atoms occupying the apical positions and the organic groups at the equatorial corners. The one‐dimensional zigzag chains of 1 propagate along the b ‐axis, whereas 3 displays wave‐like double polymeric chains along the b ‐axis. For both 1 and 3 , parallel one‐dimensional polymeric chains are interconnected by C─H⋅⋅⋅π interactions. The antifungal activity of 1 – 3 was screened against Candida albicans (ATCC 18804), C. tropicalis (ATCC 750), C. glabrata (ATCC 90030), C. parapsilosis (ATCC 22019), C. lusitaniae (CBS 6936) and C. dubliniensis (clinical isolate 28). The antifungal activity of 3 was noteworthy since it was not only more active than 1 and 2 , but also more active than the control drugs (nystatin and fluconazole nitrate) in some cases.     

Molecular weight dependent structure and charge transport in MAPLE‐deposited poly(3‐hexylthiophene) thin films

In this work, poly(3‐hexylthiophene) (P3HT) films prepared using the matrix‐assisted pulsed laser evaporation (MAPLE) technique are shown to possess morphological structures that are dependent on molecular weight (MW). Specifically, the structures of low MW samples of MAPLE‐deposited film are composed of crystallites/aggregates embedded within highly disordered environments, whereas those of high MW samples are composed of aggregated domains connected by long polymer chains. Additionally, the crystallite size along the side‐chain (100) direction decreases, whereas the conjugation length increases with increasing molecular weight. This is qualitatively similar to the structure of spin‐cast films, though the MAPLE‐deposited films are more disordered. In‐plane carrier mobilities in the MAPLE‐deposited samples increase with MW, consistent with the notion that longer chains bridge adjacent aggregated domains thereby facilitating more effective charge transport. The carrier mobilities in the MAPLE‐deposited simples are consistently lower than those in the solvent‐cast samples for all molecular weights, consistent with the shorter conjugation length in samples prepared by this deposition technique. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 652–662     

Micro-/Mesoporous conjugated polymer based on star-shaped triazine-functional triphenylamine framework as the performance-improved cathode of Li-organic battery

A novel organic conjugated polymer based on star-shaped triazine-functional triphenylamine framework poly[1,3,5-tris(4-diphenylamino-phenyl)triazine] (PTDAPTz) is designed and synthesized successfully by FeCl₃-catalysted chemical oxidative polymerization. The polymer PTDAPTz powder exhibits a compactly packed pleated skirt shape-like morphology with a high surface area (~930 m² g⁻¹) and a bimodal pore size distribution ranging from micropores (~0.55 nm) to small diameter mesopores (~2–6 nm). As explored as the cathode material, the obtained PTDAPTz presents the double charge–discharge process characteristics of both the free radical redox of triphenylamine unit and the bipolar redox of triazine unit in the polymer and a well-defined multistage charge/discharge voltage plateau (~3.8 V for p-doped and ~2.0 V for n-doped) during the charge–discharge process. Also, the PTDAPTz demonstrates an improved capacity (stabilized at 123 mA h g⁻¹ until 50th cycle) and the enhanced rate performance compared to polytriphenylamine (PTPAn). Specially, the discharge curve for the part of triphenylamine unit presents an obviously improved discharge plateau (~3.8 V for PTDAPTz compared to ~3.6 V for PTPAn) due to the electron-withdrawing effect of the triazine unit to triphenylamine. The elaborate structural design and created micro-/mesoporous morphology with the double charge–discharge process make PTDAPTz a potential candidate as the performance-improved cathode of Li-organic battery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2574–2583     

Synthesis and Characterization of the First Pyrrolidine‐Based Chiral Ionic Liquids

The first example of pyrrolidine‐based room‐temperature chiral ionic liquids using 2‐aminobutanol as chiral auxiliary is described.     

Organic‐acid mediated bulk polymerization of ε‐caprolactam and its copolymerization with ε‐caprolactone

Polyamides (PA) constitute one of the most important classes of polymeric materials and have gained strong position in different areas, such as textiles, fibers, and construction materials. Whereas most PA are synthesized by step‐growth polycondensation, PA 6 is synthesized by ring opening polymerization (ROP) of ε‐caprolactam (ε‐CLa). The most popular ROP methods involve the use of alkaline metal catalyst difficult to handle at large scale. In this article, we propose the use of organic acids for the ROP of ε‐CLa in bulk at 180 °C (below the polymer's melting point). Among evaluated organic acids, sulfonic acids were found to be the most effective for the polymerization of ε‐CLa , being the Brønsted acid ionic liquid: 1‐(4‐sulfobutyl)?3‐methylimidazolium hydrogen sulfate the most suitable due to its higher thermal stability. End‐group analysis by ¹H nuclear magnetic resonance and model reactions provided mechanistic insights and suggested that the catalytic activity of sulfonic acids was a function of not only the acid strength, but of the nucleophilic character of conjugate base as well. Finally, the ability of sulfonic acid to promote the copolymerization of ε‐CLa and ε‐caprolactone is demonstrated. As a result, poly(ε‐caprolactam‐co‐ε‐caprolactone) copolymers with considerably randomness are obtained. This benign route allows the synthesis of poly(ester amide)s with different thermal and mechanical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2394–2402     

Effects of silica nanoparticle addition on polymer semiconductor wettability and carrier mobility in solution‐processable organic transistors on hydrophobic substrates

The effects of the addition of silica nanoparticles (SNPs) on wettability of regioregular poly(3‐hexylthiophene) (P3HT) organic semiconductor solutions on hydrophobic substrates and the carrier mobility in organic field‐effect transistors (OFETs) made of these films are investigated. The dewetting of films made from P3HT solutions on hydrophobic substrates modified with octadecyltrichlorosilane (ODTS) is markedly suppressed after the addition of SNPs with phenyl surfactants. This enables us to fabricate continuous P3HT/SNPs films with high crystallinity by the conventional spin‐coating technique, leading to higher mobility compared with P3HT FETs fabricated on non‐modified substrates. Moreover, the addition of SNPs with larger diameters compensates for the degradation of mobility associated with the increase in the concentration of SNPs. Solution‐processed P3HT/SNPs FETs on ODTS‐modified substrates exhibit a field‐effect mobility of 1.3 × 10^?2 cm² V^?1 s^?1, which is almost comparable to that of P3HT FETs without SNPs (2.1 × 10^?2 cm² V^?1 s^?1). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 509–516     

Detrimental Ni(0) transfer in Kumada catalyst transfer polycondensation of benzo[2,1‐b:3,4‐b']dithiophene

This article deals with the Kumada Catalyst Transfer Polycondensation (KCTP) of 4,7‐dioctylbenzo[2,1‐b:3,4‐b']dithiophene ( BDP‐Oct ) using Ni(II) catalyst or In/cat combination. A combination of MALDI MS, GPC, and ³¹P NMR spectroscopy is used to reveal the failure of the KCTP of this particular monomer. Intermolecular transfer reactions to monomer appeared to prevent the formation of polymer. This result is remarkable, since isomeric benzo[1,2‐b:4,5‐b']dithiophene polymerizes in a controlled way. The presence of a “non‐aromatic double bond” in annulated monomers is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1706–1712     

Porous shape memory polymers: Design and applications

Porous shape memory polymers (SMPs) exhibit geometric and volumetric shape change when actuated by an external stimulus and can be fabricated as foams, scaffolds, meshes, and other polymeric substrates that possess porous three-dimensional macrostructures. These materials have applications in multiple industries such as textiles, biomedical devices, tissue engineering, and aerospace. This review article examines recent developments in porous SMPs, with a focus on fabrication methods, methods of characterization, modes of actuation, and applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1300–1318