Enatiomeric analysis of simendan by CE with beta-CD as chiral selector compared with CMPA-HPLC

The chiral separation of simendan enantiomers using capillary electrophoresis was studied with beta-cyclodextrin (beta-CD) as chiral selector. The influences of the concentration and pH of borate buffer solution, beta-CD concentration and methanol content in the background electrolyte were investigated. These factors were compared with those in an HPLC with beta-CD as chiral mobile phase additive (CMPA-HPLC). The quantification properties of the developed CE method were examined. A baseline separation of simendan enantiomers was achieved in the background electrolyte of 20 mmol/L borate buffer (pH 11.0) containing 12 mmol/L beta-CD-methanol (50:50 in volume ratio). The CE method is comparable with CMPA-HPLC in chiral resolution, although the optimal pH in CE (11.0) is much higher than that (6.0) in CMPA-HPLC. This chiral CE method is applicable to the quantitative ananlysis and enantiomeric excess value determination of L-simendan.     

共振光散射成像检测5,10,15,20-四(对三甲基氨基苯)卟吩诱导的DNA超螺旋聚集体

A resonance light scattering （RLS） imaging method was proposed based on imaging and measuring the RLS features of single suprahelical species of DNA, and its appfication to DNA assay was also investigated. In acidic medium, porphine-5,10,15,20-tetrakis（p-phenyltlimethylaminium） （PTPTMA）, could stack along the molecular surface of DNA with the mode of long-range assembly to induce the formation of suprahelical species of DNA, resulting in strong RLS signals in the range of 450-510 nm. Under the excitation of 488 nm fight beam of argon ion laser source, single suprahelical species could be observed with the aid of a common microscope due to the strong scattered fight emitted by the suprahelical species. By capturing the RLS images of the single suprahelical species with a cooled charge coupled device （CCD） camera, and analyzing the RLS data, herein an RLS imaging method of DNA was proposed based on the linear relationship between the counts of suprahelical species in the detection focus plane and the concentration of DNA in nanograms. When 1.8 μmol/L PTPTMA was employed, both calf thymus DNA （ct DNA） and fish sperm DNA （fs DNA） in the range of 25-1100 ng/mL could be detected with the limits of detection lower than 25 ng/mL （3a）. Four synthetic samples were detected satisfactorily with relative standard deviations less than 5.1%.     

Gas-phase spectroscopy of the unstable sulfur diisocyanate molecule S(NCO)2.

Sulfur diisocyanate is generated from a heterogeneous reaction of gaseous sulfur dichloride with silver cyanate and studied for the first time in the gas phase. Combined with quantum chemical calculations, the electronic structure is characterized by photoelectron spectroscopy (PES). Simultaneously, an investigation of the possible ionization and dissociation processes for the molecular cation is presented based on experimental soft ionization mass spectrometry. From the calculated bond-dissociation energies, the dissociation pathway is determined. S(NCO)2+ undergoes 1,3-sigmatropic rearrangement with a smaller barrier height (9.9 kcal mol(-1)) than the neutral counterpart. Thus, the 1,3-sigmatropic rearrangement is preferred for the molecular cation, and OCNCO+ and NS+ is produced by subsequent dissociation of the rearrangement product. The analysis agrees very well with the experimental mass spectrum.     

Thermotropic Liquid Crystals Based on Extended 2,5‐Disubstituted‐1,3,4‐Oxadiazoles: Structure–Property Relationships,Variable‐Temperature Powder X‐ray Diffraction,and Small‐Angle X‐ray Scattering Studies

A class of extended 2,5‐disubstituted‐1,3,4‐oxadiazoles R¹‐C₆H₄‐{OC₂N₂}‐C₆H₄‐R² (R¹=R²=C₁₀H₂₁O 1 a , p‐C₁₀H₂₁O‐C₆H₄‐C?C 3 a , p‐CH₃O‐C₆H₄‐C?C 3 b ; R¹=C₁₀H₂₁O, R²=CH₃O 1 b , (CH₃)₂N 1 c ; F 1 d ; R¹=C₁₀H₂₁O‐C₆H₄‐C?C, R²=C₁₀H₂₁O 2 a , CH₃O 2 b , (CH₃)₂N 2 c , F 2 d ) were prepared, and their liquid‐crystalline properties were examined. In CH₂Cl₂ solution, these compounds displayed a room‐temperature emission with λ_max at 340–471 nm and quantum yields of 0.73–0.97. Compounds 1 d , 2 a – 2 d , and 3 a exhibited various thermotropic mesophases (monotropic, enantiotropic nematic/smectic), which were examined by polarized‐light optical microscopy and differential scanning calorimetry. Structure determination by a direct‐space approach using simulated annealing or parallel tempering of the powder X‐ray diffraction data revealed distinctive crystal‐packing arrangements for mesogenic molecules 2 b and 3 a , leading to different nematic mesophase behavior, with 2 b being monotropic and 3 a enantiotropic in the narrow temperature range of 200–210 °C. The structural transitions associated with these crystalline solids and their mesophases were studied by variable‐temperature X‐ray diffractometry. Nondestructive phase transitions (crystal‐to‐crystal, crystal‐to‐mesophase, mesophase‐to‐liquid) were observed in the diffractograms of 1 b, 1 d , 2 b, 2 d , and 3 a measured at 25–200 °C. Powder X‐ray diffraction and small‐angle X‐ray scattering data revealed that the structure of the annealed solid residue 2 b reverted to its original crystal/molecular packing when the isotropic liquid was cooled to room temperature. Structure–property relationships within these mesomorphic solids are discussed in the context of their molecular structures and intermolecular interactions.     

Capillary flow behavior of worm‐like micelles studied by small‐angle X‐ray scattering and small angle light scattering

A novel capillary flow device has been developed and applied to study the orientation of worm‐like micelles, among other systems. Small‐angle X‐ray scattering (SAXS) data from micelles formed by a Pluronic block copolymer in aqueous salt solution provides evidence for the formation of worm‐like micelles, which align under flow. A transition from a rod‐like form factor to a less persistent conformation is observed under flow. Flow alignment of worm‐like micelles formed by the low molar mass amphiphile system cetyl pyridinium chloride+sodium salicylate is studied for comparative purposes. Here, inhomogenous flow at the micron scale is revealed by streaks in the small‐angle light scattering pattern perpendicular to the flow direction. Copyright © 2006 John Wiley & Sons, Ltd.     

Reinforcement of Self‐Healing Polyacrylic Acid Hydrogel with Acrylamide Modified Microcrystalline Cellulose†

Self‐healing hydrogel such as polyacrylic acid (PAA) hydrogel has attracted increasing attention based on its promising potential applications. However, it usually suffers from low strength especially as mechanical device. Herein, a commercial microcrystalline cellulose (MCC) was modified with acrylamide to graft polyacrylamide (PAM) chains on the particle surface. The acrylamide‐modified MCC (AM‐MCC) was then dispersed in monomer solution of acrylic acid to prepare composite hydrogel. The mechanical properties of the obtained composite hydrogels and the self‐healed hydrogels were carefully measured by compressive and tensile tests, and by dynamic mechanical analysis. Our results demonstrate that introduction of a small amount of AM‐MCC such as 3 wt% can not only reinforce the original hydrogel and the healed hydrogel markedly, but also improve self‐healing efficiency obviously. The analyses indicate that in addition to the reversible multi‐interactions such as hydrogen bonding and ionic interactions, the entanglements between the PAA chains of the hydrogel matrix and the PAM chains grafted on the MCC particles have also played an important role on the improvement in mechanical performances and the healing ability of the hydrogel. Moreover, the responsiveness to exterior ion has been tested to indicate potential application of the composite hydrogel as self‐healable sensor.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

Spectroelectrochemical and Voltammetric Studies of L‐DOPA

The electrooxidation of L -dopa at GC electrode was studied by in situ UV-vis spectroelectrochemistry (SEC) and cyclic voltammetry. The mechanism of electrooxidation and some reaction parameters were obtained. The results showed that the whole electrooxidation reaction of L -dopa at glassy carbon (GC) electrode was an irreversible electrochemical process followed by a chemical reaction in neutral solution (EC mechanism). The spectroelectrochemical data were treated by the double logarithm method together with nonlinear regression, from which the formal potential E⁰=228 mV, the apparent electron-transfer number of the electrooxidation reaction αn=0.376 (R=0.99, SD=0.26), the standard electrochemical rate constant k⁰=(3.93±0.12)×10⁻4 cm s⁻¹ (SD=1.02×10⁻²), and the formation equilibrium constant of the following chemical reaction k_c=(5.38±0.34)×10⁻¹ s⁻¹ (SD=1.02×10⁻²) were also obtained.     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.