Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

Ultrasonic technology for enhanced oil recovery from failing oil wells and the equipment for its implemention

A new method for the ultrasonic enhancement of oil recovery from failing wells is described. The technology involves lowering a source of power ultrasound to the bottom of the well either for a short treatment before removal or as a permanent placement for intermittent use. In wells where the permeability is above 20 mD and the porosity is greater than 15% ultrasonic treatment can increase oil production by up to 50% and in some cases even more. For wells of lower permeability and porosity ultrasonic treatment alone is less successful but high production rates can be achieved when ultrasound is applied in conjunction with chemicals. An average productivity increase of nearly 3 fold can be achieved for this type of production well using the combined ultrasound with chemical treatment technology.     

用水物理模型表征纯水离子积

纯水被描述为离解成水合氢离子(H₃O)¹⁺和氢氧根离子(HO)^1-, 平衡常数在液态水的温度和压力范围内被称为离子积,即两种离子的平衡态浓度的乘积. 用非线性最小二乘法把实验数据拟合成基于化学热力学的平衡态方程. 本工作提出一个全新的、基于统计物理的水离子积方程,其中的离子为带正电的质子和带负电的质子空穴(质穴). 把0-100 ℃纯水的实验数据用非线性最小二乘法拟合的方程,给出的结果比35年工业标准更准确.     

Determination of 25 elements in the complex oxide mineral zirconolite by analytical electron microscopy

In this paper we describe a technique for the determination of 25 elements in natural zirconolite using energy-dispersive analytical electron microscopy (AEM). The method presented here allows one to quantitatively investigate the chemistry of submicron-scale zones in complex oxide minerals. The effects of electron channeling, thickness variability and variations in detector resolution were minimized by using a controlled set of operating procedures and instrument parameters. To provide a high level of accurayy, k_ATI-factors were determined from standards for most of the 25 elements of interest, including all of the major elements. Each analytical spectrum is reduced to a set of raw peak counts (and errors) using a digital top-hat filter to suppress background followed by multiple least squares fitting of reference spectra. Counting times of 12–15 min per analysis were required to provide suitable counting statistics. Results are presented for zirconolite samples from the contact metamorphic aureole of the Bergell granodiorite intrusion, Switzerland-Italy. A comparison of 43 AEM analyses with 15 analyses obtained by wavelength-dispersive electron probe microanalysis (EPMA) shows that there is excellent agreement between the two data sets in the amounts of individual elements present, chemical trends and overall stoichiometry. An assessment of the combined data set shows that the major substitution mechanisms in the Bergell samples are coupled substitutions involving the M5,6- and M8-sites of the zirconolite structure: ^M8Ca²⁺ + ^M5,6Ti⁴⁺→^M8REE³⁺ + ^M5,6(Al,Fe)³⁺ and ^M8Ca²⁺ + ^M5,6Ti⁴⁺→^M8(Th,U)⁴⁺ + ^M5,6 (Mg,Fe)²⁺.     

激光诱导直接化学光刻

本文利用Ar~+激光倍频257.3nm进行扫描蚀刻Si、GaAs和Zn片,获得的最小光刻线宽为1.2μm,给出蚀刻深度与光强/扫描速度的关系曲线等参量,首次利用光刻技术估计卤素自由基的扩散系数、自由路程以及激光聚焦光斑大小,以及观察到阈值现象。     

傅里叶红外光谱法研究GAP/AP混合体系的快速热裂解

用T-Jump/FTIR在线联用分析技术,研究了GAP/AP混合体系在模拟燃烧条件下快速加热高温高压的热裂解。结果表明,GAP/AP混合体系的主要热裂解气相产物的组成发生了变化,说明组分之间存在相互作用。压力对GAP/AP混合体系气相产物有明显的影响,表明混合体系组分GAP和AP之间的相互作用是通过AP分解气相产物进行的,混合体系不但存在气相之间的反应,也存在气相/凝聚相反应。而温度并没有影响AP对GAP的作用。用T-Jump/FTIR在线分析技术能够实现模拟燃烧条件下含能材料实时气体产物分析,为从微观反应的角度探索含能材料的快速高压热裂解及其组分之间的相互作用提供一条技术途径。     

Large Eddy Simulations of a piloted lean premix jet flame using finite-rate chemistry

A Large Eddy Simulation (LES) model capable of accurately representing finite-rate chemistry effects in turbulent premixed combustion is presented. The LES computations use finite-rate chemistry and implicit LES combustion modelling to simulate an experimentally well-documented lean-premixed jet flame stabilized by a stoichiometric pilot. The validity of the implicit LES assumption is discussed and criteria are expressed in terms of subgrid scale Damköhler and Karlovitz numbers. Simulation results are compared to experimental data for velocity, temperature and species mass fractions of CH₄, CO and OH. The simulation results highlight the validity and capability of the present approach for the flame and in general the combustion regime examined. A sensitivity analysis to the choice of the finite-rate chemistry mechanism is reported, this analysis indicates that the one and two-step global reaction mechanisms evaluated fail to capture the reaction layer with sufficient accuracy, while a 20-species skeletal mechanism reproduces the experimental observations accurately including the key finite-rate chemistry indicators CO and OH. The LES results are shown to be grid insensitive and that the grid resolution within the bounds examined is far less important compared to the sensitivity of the finite-rate chemistry representation. The results are analyzed in terms of the flame dynamics and it is shown that intense small scale mixing (high Karlovitz number) between the pilot and the jet is an important mechanism for the stabilization of the flame.     

The role of cool-flame chemistry in quasi-steady combustion and extinction of n-heptane droplets

Experiments on the combustion of large n-heptane droplets, performed by the National Aeronautics and Space Administration in the International Space Station, revealed a second stage of continued quasi-steady burning, supported by low-temperature chemistry, that follows radiative extinction of the first stage of burning, which is supported by normal hot-flame chemistry. The second stage of combustion experienced diffusive extinction, after which a large vapour cloud was observed to form around the droplet. In the present work, a 770-step reduced chemical-kinetic mechanism and a new 62-step skeletal chemical-kinetic mechanism, developed as an extension of an earlier 56-step mechanism, are employed to calculate the droplet burning rates, flame structures, and extinction diameters for this cool-flame regime. The calculations are performed for quasi-steady burning with the mixture fraction as the independent variable, which is then related to the physical variables of droplet combustion. The predictions with the new mechanism, which agree well with measured autoignition times, reveal that, in decreasing order of abundance, H₂O, CO, H₂O₂, CH₂O, and C₂H₄ are the principal reaction products during the low-temperature stage and that, during this stage, there is substantial leakage of n-heptane and O₂ through the flame, and very little production of CO₂ with no soot in the mechanism. The fuel leakage has been suggested to be the source of the observed vapour cloud that forms after flame extinction. While the new skeletal chemical-kinetic mechanism facilitates understanding of the chemical kinetics and predicts ignition times well, its predicted droplet diameters at extinction are appreciably larger than observed experimentally, but predictions with the 770-step reduced chemical-kinetic mechanism are in reasonably good agreement with experiment. The computations show how the key ketohydroperoxide compounds control the diffusion-flame structure and its extinction.