热丝和射频等离子体化学气相沉积法制备定向碳纳米管薄膜

采用热丝和射频等离子体复合化学气相沉积设备(PE-HF-CVD),以CH4、H2和N2为反应气体.在较低衬底温度下(500℃),用简单的催化剂制备方法--旋涂法在硅片上涂覆Ni(NO3)2溶液,经热处理及H2还原后的Ni颗粒为催化剂,在硅衬底上制备出了垂直于硅片且定向生长的碳纳米管薄膜.扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果显示,1 mol/l的硝酸镍溶液旋涂硅片所得催化剂制得的碳纳米管管径为30～50 nm,长度超过4μm,定向性好.并用拉曼光谱(Raman)对不同摩尔浓度Ni(NO3)2溶液条件下制备的碳纳米管薄膜样品进行了表征.     

高性能Ag/AgI红外空芯光纤的研究

采用液相化学镀膜法研制了内面镀有银膜和碘化银膜(Ag/AgI)的高性能空芯红外光纤.分析了绿色导航光和红外激光同时低损耗传输的光纤结构参量.长度1 m、内直径0.7 mm的Ag/AgI空芯光纤不仅在红外有低损耗传输特性,而且首次在波长530 nm处获得了7 dB/m的低传输损耗特性.满足可见光作为导航光的同轴传输要求.通过分析和改进实验工艺参量,有效降低Ag和AgI薄膜的表面粗糙度.给出了高性能Ag/AgI空芯光纤的介质镀膜的具体工艺参量.     

Effects of coating parameters on the morphology of SiO2-coated TiO2 and the pigmentary properties

SiO₂-coated TiO₂ powders were prepared by the chemical deposition method starting from rutile TiO₂ and Na₂SiO₃. The SiO₂-coated TiO₂ powders were characterized by X-ray photoelectron spectroscopy, Zeta-potential analysis, Fourier transform infrared spectroscopy, and transmission electron microscopy. The evolution of island-like and uniform coating layers was found to depend upon the ratio of Na₂SiO₃ to TiO₂, reaction temperature, and pH. The whiteness and brightness of the SiO₂-coated TiO₂ powders increased in response to an increase in the SiO₂ loading, but there was a maximum value among the light scattering indexes. The SiO₂-coated TiO₂ powders possessed more negative Zeta potentials than the naked TiO₂. The dispersibility of the SiO₂-coated TiO₂ powders with the continuous and uniform SiO₂ coating layers was higher than that of the naked TiO₂ and the SiO₂-coated TiO₂ powders with the island-like SiO₂ coating layers.     

SiO2包覆铕(Ⅲ)配合物的荧光纳米粒子合成与性质

以前驱物pAB-DTPAA-APTEOS、正硅酸乙酯(TEOS)和三氯化铕(EuCl3)等为原料,采用油包水(W/O)的反相微乳液法,在正硅酸乙酯(TEOS)和3-氨丙基三乙氧基硅烷(APTEOS)的共同水解下,制备出新型的SiO2包覆铕配合物荧光纳米粒子Eu-pAB-DTPAA-AP-SiO2。运用TEM、IR、UV-Vis、荧光光谱等技术对荧光纳米粒子进行了表征。TEM结果表明:包覆体呈球形,分散均匀,平均粒径为40nm。纳米粒子与配体、前驱物的紫外吸收谱相比较,峰位发生了一定的红移,表明通过反相微乳液法得到的固体粉末与EuCl3反应后,已经生成配合物Eu-pAB-DTPAA-AP-SiO2。红外光谱研究表明,在801cm-1出现νSi—C的伸缩振动峰,471cm-1处出现νEu—O的伸缩振动峰。由此证实Eu-pAB-DTPAA-AP-SiO2配合物的存在。荧光光谱分析表明,纳米粒子Eu-pAB-DTPAA-AP-SiO2表现出较好的荧光性能,位于592,615,689nm的发射峰分别归属于Eu3 离子的5D0→7F1、5D0→7F2和5D0→7F4跃迁,其中最强峰615nm属于Eu3 的特征跃迁发射。作为一种新型的荧光试剂,该纳米粒子具有粒径小,亲水性强,荧光强度大,且表面的氨基能方便地与生物分子偶联,故可作为优良的时间分辨荧光标记物用于各种高灵敏生物检测技术中。     

一种ICF靶用智能靶涂层的结构和性能表征

 合成了一种材料N,N′-二苯并咪唑-苝二酰亚胺(PV),经多次真空升华提纯,产率为68%,纯度达95%以上。利用傅里叶变换红外光谱（FTIR）、紫外/可见吸收光谱（UV/Vis）、元素分析、热失重分析（TG）对该产物的结构和性能进行了表征。结果表明:苝四甲酸二酐（PTCDA）与邻苯二胺反应,易转化成二苯并咪唑苝类衍生物。该PV材料在450～750 nm范围内有两个强的吸收峰,其初始热分解温度约为510 ℃,热稳定性较好。     

Composite coatings of polyamide/graphene: microstructure,mechanical, thermal,and barrier properties

This effort reports on novel fluorinated polyamide (FPA) and polyamide 1010 (PA1010)-based blends and graphene reinforced nanocomposite. PA1010/FPA (80:20) blend was opted as matrix material on the basis of molecular weight, thermal, and shear stress performance. Graphene was obtained through in situ chemical method of graphene oxide reduction. PA1010/FPA/Graphene nanocomposites was developed using various graphene loadings (up to 5 wt.%). Thin film coatings were prepared on glass substrate. Consequently, the PA1010/FPA/Graphene attained regular spongy morphological pattern. PA1010/FPA/Graphene 3 also showed improved T₀ and T_max of 534 and 591 °C relative to the neat blend (T₁₀ 423 °C; T_max 551 °C). Limiting oxygen index measurement indicated better non-flammability of PA1010/FPA/Graphene 1–3 nanocomposite series (57–60%) relative to the blend series (28–31%). UL94 tests also showed V-0 rating for nanocomposites. Furthermore, PA1010/FPA/Graphene 3 nanocomposite revealed significantly high tensile strength (62 MPa), flexural modulus (1690 MPa), and adhesive properties to be utilized as coating materials. The nanocomposite coatings also displayed outstanding barrier properties against O₂ and H₂O compared with neat blends.     

In situ deposition behavior of silica-based layers and its effect on thermal degradation of IN713 turbine blades during operation of a micro-gas turbine

This study examined the in situ deposition behavior of silica-based layers on IN713 turbine blades during the operation of a 13 kgf-class gas turbine at a rotation speed of 20,000/min as well as its effect on the degradation of the metallic substrate. Tetraethylorthosilicate (TEOS) was mixed with the fuel (liquid petroleum gas, LPG) and burned to generate silica-based coating precursors for deposition from the flame. Two deposition conditions were adopted. For condition 1 (C1), the silicon-to-carbon ratio in the mixed fuel was set at 0.1 mol% for the first 5 min and at zero mol% for the final 95 min in a 100-min operation. For condition 2 (C2), the ratio was set at 0.005 mol% during the entire 100 min operation. The total TEOS feed was the same under both conditions. C1 resulted in a rather uniform and thicker (5-10 μm on the pressure side) porous silica-based coating on the blade than C2. The in situ deposited layer of C1 was well preserved on the blade and protected the underlying metallic substrate from oxidation during the entire 100 min operation. The layer on the C2 blades was ∼5 μm thick at the region near to root, but was too thin in the other areas on the blade to be protective. The early build-up of a porous layer to an effective thickness on the blades produced a thermal barrier toward the substrate as well as a diffusion barrier toward the oxidizing elements during operation.     

Optical and electrical characteristics of Al-doped ZnO thin films prepared by aqueous phase deposition

Transparent conducting Al-doped ZnO (AZO) thin films have been deposited by sol-gel route. Starting from an aqueous solution of zinc acetate by adding aluminum chloride as dopant, a c-axis oriented polycrystalline ZnO thin film 100 nm in thickness could be spin-coated on glass substrates via a two-step annealing process under reducing atmosphere. The effects of thermal annealing and dopant concentration on the structural, electrical and optical properties of AZO thin films were investigated. The post-treated AZO films exhibited a homogenous dense microstructure with grain sizes less than 10 nm as characterized by SEM photographs. The annealing atmosphere has prominent impact on the crystallinity of the films which will in turn influence the electrical conductivity. By varying the doping concentrations, the optical and electrical properties could be further adjusted. An optimal doping concentration of Al/Zn = 2.25 at.% was obtained with minimum resistivity of 9.90 × 10⁻³ Ω-cm whereas the carrier concentration and mobility was 1.25 × 10²⁰ cm⁻³ and 5.04 cm² V⁻¹ s⁻¹, respectively. In this case, the optical transmittance in the visible region is over 90%.     

A statistical dynamics approach to the study of human health data: Resolving population scale diurnal variation in laboratory data

Statistical physics and information theory is applied to the clinical chemistry measurements present in a patient database containing 2.5 million patients' data over a 20-year period. Despite the seemingly naive approach of aggregating all patients over all times (with respect to particular clinical chemistry measurements), both a diurnal signal in the decay of the time-delayed mutual information and the presence of two sub-populations with differing health are detected. This provides a proof in principle that the highly fragmented data in electronic health records has potential for being useful in defining disease and human phenotypes.