Enhancing the enzymatic hydrolysis of cellulosic materials using simultaneous ball milling

One of the limiting factors restricting the effective and efficient bioconversion of softwood-derived lignocellulosic residues is the recalcitrance of the substrate following pretreatment. Consequently, the ensuing enzymatic process requires relatively high enzyme loadings to produce monomeric carbohydrates that are readily fermentable by ethanologenic microorganisms. In an attempt to circumvent the need for larger enzyme loadings, a simultaneous physical and enzymatic hydrolysis treatment was evaluated. A ball-mill reactor was used as the digestion vessel, and the extent and rate of hydrolysis were monitored. Concurrently, enzyme adsorption profiles and the rate of conversion during the course of hydrolysis were monitored. α-Cellulose, employed as a model substrate, and SO₂-impregnated steam-exploded Douglas-fir wood chips were assessed as the cellulosic substrates. The softwood-derived substrate was further posttreated with water and hot alkaline hydrogen peroxide to remove >90% of the original lignin. Experiments at different reaction conditions were evaluated, including substrate concentration, enzyme loading, reaction volumes, and number of ball beads employed during mechanical milling. It was apparent that the best conditions for the enzymatic hydrolysis of α-cellulose were attained using a higher number of beads, while the presence of air-liquid interface did not seem to affect the rate of saccharification. Similarly, when employing the lignocellulosic substrate, up to 100% hydrolysis could be achieved with a minimum enzyme loading (10 filter paper units/g of cellulose), at lower substrate concentrations and with a greater number of reaction beads during milling. It was apparent that the combined strategy of simultaneous ball milling and enzymatic hydrolysis could improve the rate of saccharification and/or reduce the enzyme loading required to attain total hydrolysis of the carbohydrate moieties.     

玻璃载体表面脱氧核糖核酸的固定及其化学发光检测

用硅烷化偶联剂把ＤＮＡ直接共价固定在载玻片表面，将辣根过氧化物酶标记的探针与之进行核酸杂交，杂交后用增强的化学发光检测。方法的检出限为７５ｐｇ。研究了ＤＮＡ分子固定在玻璃载体表面的各种条件，并建立了在玻璃载体表面进行核酸杂交的体系，为研究光纤ＤＮＡ生物传感器打下了基础。     

新型双核铜配合物的合成,表征及其对苯乙烯环氧化的催化作用

设计合成了５种新型双核铜配合物，用ＥＡ，ＩＲ，ＵＶ－Ｖｉｓ，ＸＰＳ，ＥＰＲ等进行了结构表征，并研究了这些Ｃｕ２配合物模拟双核铜单加氧酶多巴胺β－羟化酶催化苯乙烯环氧化反应的特征。结果表明，这些配合物具有两种类型的结构：脱质子型Ｃｕ２ＬＯＨ和非脱质子型「（Ｃｕ２Ｈ２ＬＸ）Ｙ」Ｙ（Ｘ＝Ｙ＝Ｃｌ＾１－，Ｂｒ＾－；Ｘ＝ＯＨ，Ｙ＝Ｏ２ＣｌＯ＾－２），两类配合物可相互转化。非脱质子型配合物催化ＰｈＩＯ对苯乙烯     

发光分析

本文是《分析试验室》定期评述中“发光分析”课题的第四篇评述文章，它评述在１９９５年１月～１９９６年１２月间我国发光分析的发展概况，内容包括：荧光，磷光，化学发光和生物发光分析等方面，引用文献３５４篇。     

流动注射—化学发光法测定苯甲醛

依据苯甲醛增强没食子酸－过氧化氢－氢氧化钠体系化学发光的性质，建立了苯甲醛的流动注射化学发光分析法。     

Express detection of nonylphenol in water samples by fluorescence polarization immunoassay

The development of express method for detection of endocrine-disrupting chemicals (EDC) such as alkylphenols is required for ecological monitoring. Several attempts have been made to produce antibodies against 4-nonylphenol (NP) in recent years. This work describes the production of new antibodies against NP and also summarizes the characterization of antibodies obtained earlier. Three approaches used to produce alkylphenol-specific antibodies are compared; these are based on: 1. omega-(4-hydroxyphenyl)nonanoic or omega-(4-hydroxyphenyl)heptanoic acid NP derivatives designed to mimic the linear NP isomer; 2. 4-aminophenol, which potentially mimics various substituted phenolic compounds with different side-chain structures at position 4 of the benzene ring; and 3. a mixture of branched NP isomers, conjugated to the carrier protein via a benzene ring by the Mannich reaction, and expected to be the closest mimic of NP structure by preserving its natural alkyl moiety.Fluorescence polarization immunoassays based on different combinations of antibody and labeled antigen for screening detection of NP were developed and structural aspects of assay sensitivity and specificity were investigated. The assays based on the antisera raised against omega-(4-hydroxyphenyl)nonanoic acid and NP conjugate via Mannich reaction are capable of express detection of NP with detection limit of 7 microg mL(-1 )and assay dynamic range of 18-300 microg mL(-1).     

The Electrochemical Behavior of α‐Ketoglutarate at the Hanging Mercury Drop Electrode in Acidic Aqueous Solution and Its Practical Application in Environmental and Biological Samples

The voltammetric behavior of α‐ketoglutarate (α‐KG) at the hanging mercury drop electrode (HMDE) has been investigated in acetate buffer solution. Under the optimum experimental conditions (pH 4.5, 0.2 M NaAc‐HAc buffer solution), a sensitive reductive wave of α‐KG was obtained by linear scan voltammetry (LSV) and the peak potential was ?1.18 V (vs. SCE), which was an irreversible adsorption wave. The kinetic parameters of the electrode process were α=0.3 and k_s=0.72 1/s. There was a linear relationship between peak current i_{p, α‐KG} and α‐KG concentration in the range of 2×10^?6–8×10^?4 M α‐KG. The detection limit was 8×10^?7 M and the relative standard deviation was 2.0% (C_α‐KG=8×10^?4 M, n=10). Applications of the reductive wave of α‐KG for practical analysis were addressed as follows: (1) It can be used for the quantitative analysis of α‐KG in biological samples and the results agree well with those obtained from the established ultraviolet spectrophotometric method. (2) Utilizing the complexing effect between α‐KG and aluminum, a linear relationship holds between the decrease of peak current of α‐KG Δi_p and the added Al concentration Cequation/tex2gif-inf-5.gif in the range of 5.0×10^?6–2.5×10^?4 M. The detection limit was 2.2×10^?6 M and the relative standard deviation was 3.1% (Cequation/tex2gif-inf-6.gif=4×10^?5 M, n=10). It was successfully applied to the detection of aluminum in water and synthetic biological samples with satisfactory results, which were consistent with those of ICP‐AES. (3) It was also applied to study the effect of Al^III on the glutamate dehydrogenase (GDH) activity in the catalytically reaction of α‐KG+NH +NADH?L ‐glutamate+NAD⁺+H₂O by differential pulse polarography (DPP) technique. By monitoring DPP reductive currents of NAD⁺ and α‐KG, an elementary important result was found that Al could greatly affect the activity of GDH. This study could be attributed to intrinsic understanding of the aluminum's toxicity in enzyme reaction processes.     

神经生长因子的化学发光标记与检测

以辣根过氧化物酶（ＨＲＰ）和吖啶酯（ＡＥ）为化学发光标记试剂分别标记神经生长因子（ＮＧＦ）单克隆抗体，经分离纯化制成标记抗体（ＨＲＰ－Ａｂ，ＡＥ－Ａｂ），采用化学发光免疫分析法（ＣＬＩＡ）对ＮＧＦ进行检测，其检出限为０．５ｎｇ／ｍＬ，线性范围为２～１２８ｎｇ／ｍＬ．１０例样本分别用ＣＬＩＡ和ＲＩＡ进行检测，其结果无显著性差异．     

Bioanalytical methods applied to endocrine disrupting polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans. A review

The usual methods for determining polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and polychlorinated biphenyls (PCB) are generally expensive and time consuming. This fact has favored the development of faster and cheaper techniques, based on immunoassays and bioassays. This paper reviews these bioanalytical methods and their analytical importance at the present moment.     

Optimization of hydrolase efficiency in organic solvents

The application of hydrolases in organic solvents for synthetic purposes is a procedure routinely adopted in organic chemistry, especially for the preparation of chiral building blocks. Numerous studies have shed light on several aspects of the mechanism of hydrolase action in low-water environments. Procedures suitable to improve the catalytic efficiency of enzymes and productivity of the synthetic processes have been reported. These fundamental and applied investigations have made hydrolase-catalyzed reactions in organic solvents of industrial interest. In this article we describe and discuss various approaches adopted to optimize the performance of hydrolases in organic media, with special emphasis on the formulation of the biocatalysts which, under proper conditions, can display an activity equal to that displayed in aqueous buffers.