Acridinium ester chemiluminescence: pH dependent hydrolysis of reagents and flow injection analysis of hydrogen peroxide and glutamate

An automated analysis system is described for the measurement of hydrogen peroxide based on a chemiluminescence reaction with phenyl 10-methylacridinium-9-carboxylate (PMAC). A reversed FIA experimental arrangement is used to establish the operating conditions for the measurement of submicromolar levels of hydrogen peroxide. The carrier stream consists of hydrogen peroxide standards prepared in a pH 9.0, boric acid buffer and the flow rate for this carrier/sample stream is 4 ml/min. Twenty microliters of a 10 mM PMAC solution, prepared in a pH 3 phosphate buffer, are injected into the carrier/sample stream. Hydrogen peroxide mixes with the PMAC reagent in an incubation coil that is constructed by wrapping 107 cm of polyethylene tubing around a 1 cm o.d. plastic rod. The chemiluminescence reaction is then initiated by adding base just before the sample passes in front of a photomultiplier tube (PMT) detector. The calculated limit of detection (S/N = 3) for hydrogen peroxide is 0.25 M. In addition, the pH dependent hydrolysis of the PMAC reagent is characterized by an HPLC method which has been specifically developed for the separation and detection of the hydrolysis products of PMAC. Results indicate that a pH of 3.0 is required for long term stability of the PMAC reagent. Finally, this system has been successfully extended to the measurement of glutamate by coupling a bioreactor column of glutamate oxidase with the hydrogen peroxide detection scheme. A detection limit (S/N = 3) of 0.5 M has been established for glutamate with a throughput of 200 samples per hour.     

Utility of copper(II) oxide as a packed reactor in flow injection assembly for rapid analysis of some angiotensin converting enzyme inhibitors

A new simple, sensitive, rapid and precise flow injection (FI) procedure based on the formation of copper complexes with some angiotensin converting enzyme (ACE) inhibitors has been developed and evaluated for the analysis of lisinopril (LN), enalapril maleate (EP), ramipril (RP) and perindopril tert-butylamine (PD). In this method, samples were injected into a flowing stream of distilled-deionized water, carried through the packed reactor of CuO for derivatization followed by ultraviolet (UV) detection. The flow rate was 1.5 ml min⁻¹ and column temperature was ambient (25 °C). Lisinopril was injected directly into the flowing stream and the detector response was measured at 262 nm. The hydrolysis products of enalapril maleate, ramipril and perindopril tert-butylamine in 0.2N NaOH were injected after neutralization with 1N HCl and the detector response was measured at 272, 265 and 252 nm, respectively. The developed method was successfully applied to the determination of tested drugs in pharmaceutical preparations at a sampling rate of 60 samples h⁻¹ and a recovery near 100% for all compounds.     

Multichannel homogeneous immunoassay for detection of 2,4,6-trinitrotoluene (TNT) using a microfabricated capillary array electrophoresis chip

A high-throughput homogeneous immunoassay for the sensitive detection of 2,4,6-trinitrotoluene (TNT) has been developed using radial capillary array electrophoresis microdevices. Samples consisting of equilibrium mixtures of anti-TNT antibody (Ab), fluorescein-labeled TNT, and various concentrations of unlabeled TNT were electrokinetically injected into 48 channels of a radial capillary array electrophoresis microchannel plate. The rapid electrophoretic separation allows us to analyze the equilibrium ratio formed by the competition between the labeled and the unlabeled TNT for Ab binding. The simultaneous parallel TNT separations facilitate determination of a calibration curve for the TNT assay, which has high sensitivity (LOD, 1 ng/mL) and a wide dynamic range (1-300 ng/mL).     

Fluoride-induced chemiluminescent decomposition of dioxetanes bearing a siloxyaryl moiety to produce an alkyl aryl ketone as an emitter

Tetrabutylammonium fluoride induces the decomposition of 1-tert-butyl-4,4-dimethyl-5-(3-siloxyphenyl)-2,6,7-trioxabicyclo[3.2.0]heptane (4a) in DMSO to form an oxyanion of aromatic ketone (14a) as an emitter with high singlet-chemiexcitation yield comparable with that for a chemically initiated electron exchange luminescence (CIEEL) active dioxetane producing an oxyanion of aromatic ester as an emitter. A 7-siloxynaphthalen-2-yl analog (4b) was found on similar treatment to emit light with the maximum wavelength the longest among CIEEL-active dioxetanes hitherto known.     

Energy Transfer Electrogenerated Chemiluminescence for the Determination of Sulfite

A simple and novel electrogenerated chemiluminescence (ECL) method for the determination of sulfite has been developed based on the energy transfer ECL process. It was found that a weak ECL signal of sulfite was electrochemically generated on a platinum electrode in neutral aqueous solution. The signal was strongly enhanced by rhodamine B as an energy receptor and further enhanced by the neutral surfactant Tween 80. In 0.10M phosphate buffer solution (pH=7.5) containing 2.0×10^–6gmL^–1 rhodamine B and 0.4% (v/v) Tween 80, the ECL response to the concentration of sulfite at a potential of 0.82V was linear over a range of 1.0×10^–7gmL^–1 to 8.0×10^–6gmL^–1, and the detection limit was 5×10^–8gmL^–1. The relative standard deviation (n=11, 1.0×10^–6gmL^–1) was 3.8%. The proposed method has been successfully applied to the determination of sulfite in pharmaceutical injections and white sugar samples.     

Binding N2, N2H2, N2H4, and NH3 to transition-metal sulfur sites: modeling potential intermediates of biological N2 fixation

In the quest for low-molecular-weight metal sulfur complexes that bind nitrogenase-relevant small molecules and can serve as model complexes for nitrogenase, compounds with the [Ru(PiPr(3))('N(2)Me(2)S(2)')] fragment were found ('N(2)Me(2)S(2)'(2-)=1,2-ethanediamine-N,N'-dimethyl-N,N'-bis(2-benzenethiolate)(2-)). This fragment enabled the synthesis of a first series of chiral metal sulfur complexes, [Ru(L)(PiPr(3))('N(2)Me(2)S(2)')] with L=N(2), N(2)H(2), N(2)H(4), and NH(3), that meet the biological constraint of forming under mild conditions. The reaction of [Ru(NCCH(3))(PiPr(3))('N(2)Me(2)S(2)')] (1) with NH(3) gave the ammonia complex [Ru(NH(3))(PiPr(3))('N(2)Me(2)S(2)')] (4), which readily exchanged NH(3) for N(2) to yield the mononuclear dinitrogen complex [Ru(N(2))(PiPr(3))('N(2)Me(2)S(2)')] (2) in almost quantitative yield. Complex 2, obtained by this new efficient synthesis, was the starting material for the synthesis of dinuclear (R,R)- and (S,S)-[micro-N(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] ((R,R)-/(S,S)-3). (Both 2 and 3 have been reported previously.) The as-yet inexplicable behavior of complex 3 to form also the R,S isomer in solution has been revealed by DFT calculations and (2)D NMR spectroscopy studies. The reaction of 1 or 2 with anhydrous hydrazine yielded the hydrazine complex [Ru(N(2)H(4))(PiPr(3))('N(2)Me(2)S(2)')] (6), which is a highly reactive intermediate. Disproportionation of 6 resulted in the formation of mononuclear diazene complexes, the ammonia complex 4, and finally the dinuclear diazene complex [micro-N(2)H(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] (5). Dinuclear complex 5 could also be obtained directly in an independent synthesis from 1 and N(2)H(2), which was generated in situ by acidolysis of K(2)N(2)(CO(2))(2). Treatment of 6 with CH(2)Cl(2), however, formed a chloromethylated diazene species [[Ru(PiPr(3))('N(2)Me(2)S(2)')]-micro-N(2)H(2)[Ru(Cl)('N(2)Me(2)S(2)CH(2)Cl')]] (9) ('N(2)Me(2)S(2)CH(2)Cl'(2-) =1,2-ethanediamine-N,N'-dimethyl-N-(2-benzenethiolate)(1-)-N'-(2-benzenechloromethylthioether)(1-)]. The molecular structures of 4, 5, and 9 were determined by X-ray crystal structure analysis, and the labile N(2)H(4) complex 6 was characterized by NMR spectroscopy.     

Determination of Picogram-Levels of Acetylspiramycin in Human Urine and Serum by Flow Injection Chemiluminescence

A sensitive chemiluminescence method for the determination of acetylspiramycin is presented. It is based on the greatly enhancive effect of acetylspiramycin on the chemiluminescence reaction between luminol and hydrogen peroxide in the flow system. The increase in chemiluminescence intensity was linearly proportional to the acetylspiramycin concentration in the range from 10pg·mL^–1 to 2.0ng·mL^–1 (r²=0.9979). The detection limit was 3pg·mL^–1 (3). At a flow rate of 2.0mL·min^–1, the process of determination, including sampling and washing, could be performed in 0.5 min, and the relative standard deviations of seven replicates are less than 5.0%. The proposed method was applied successfully to the determination of acetylspiramycin in pharmaceutical preparations, human urine and serum without pre-treatment. It was found that the excretive ratio of acetylspiramycin reached its maximum 2.0 hours after having been administered orally, and the excretive ratio in 12.0 hours was 8.4.     

链酚胺型配体锌(Ⅱ)配合物模拟碳酸酐酶研究

合成了酚胺型链状配体,N,N'-二(2-羟基苄基)丙二胺(H~2L)及其Zn(Ⅱ)配合物(ZnL),通过元素分析、IR和^1HNRM等手段进行了表征。采用pH电位滴定法,在25℃±0.1℃,I=0.1mol·dm^-^3(KNO~3)条件下,测定了配体的质子化常数以及配体与金属离子Zn(Ⅱ)配位反应平衡常数。讨论了配体与金属离子Zn(Ⅱ)的配位情况,得到了配位酚羟基的解离常数。运用分光光度法,在25℃±0.1℃,I=0.1mol·dm^-^3(KNO~3)条件下,在pH=5.5～9.0(50mmol·dm^-^3缓冲溶液)范围内,研究了配合物作为碳酸酐酶模拟物催化对-硝基苯酚乙酸酯(NA)水解动力学,得到了NA酯水解的配合物催化速率常数k~N~P。实验结果表明,ZnHL^+的配位酚羟基的解离常数pK~a为6.83;催化速率常数k~N~P与pH之间不存在Sigmoidal型曲线关系,而是在pH值中性附近有最大值,ZnHL^+对NA酯水解有很好的催化效果,并且采取双重催化机理,是碳酸酐酶很好的模拟物。     

Ternary β-Cyclodextrin Complexes as Models of Allosteric Effects

Two guests reacting with cyclodextrins (CDs) may form ternary complexes, in addition to the common competition of 1:1 complexes. One of the guests can really be included into the cavity of the CD, while the second guest molecule is either inserted close to the first one or attached to the outer surface of the supramolecule by H-bonding. There is a further possibility when the included guest bears a substituent outside the cavity and the second guest can interact with it. The properties of the ternary species formed are highly influenced by the solely (or primarily) included guest. The changes are attributed to the altered properties of the hydrophilic domain of the CD. The phenomena can be proved by NMR data obtained for some binary systems of -CD inclusion complexes and acetic acid and by the stability constants of the ternary complexes formed. Allosteric effects as well as coenzyme/apoenzyme/substrate interactions could be well modelled by these types of CD complexes.     

流动注射化学发光传感器测定抗坏血酸

基于抗坏血酸抑制ＫＭｎＯ４－鲁米诺体系化光反应这一效应，设计出一种简便，快速，灵敏度高的消耗型化学发光抗坏血酸传感器。该传感器线性响应范围为１．０＊１０＾－５－４．０＊１０＾－３ｇ／Ｌ；相对标准偏差为２．３％（１．０＊１０＾－４ｇ／Ｌ，ｎ＝１１）；