Study of the reaction of chalcone analogs of dehydroacetic acid and o-aminothiophenol: synthesis and structure of 1,5-benzothiazepines and 1,4-benzothiazines

Treatment of α,β-unsaturated carbonyl compounds, obtained by the reaction of DHA and aromatic (or heteroaromatic) aldehydes, with o-aminothiophenol results in the formation of 1,5-benzothiazepines and/or 1,4-benzothiazines depending upon the reaction conditions and structure of the aldehydes. The products were characterized by the combined use of multinuclear 1D and 2D NMR and GIAO/DFT calculations of ¹H, ¹³C and ¹⁵N chemical shifts. The tautomerism of these compounds in solution was determined, they have an exocyclic CC double bond.     

清除树脂在组合化学中的应用

清除树脂是一种特殊的固相试剂。近五年，它们被广泛的用于平行液相法合成组合化学库，简化液相组合化学库的纯化操作。本文综述了清除树脂在纯化操作中的使用策略。根据清除纯化原理，介绍了共价键型和离子键型两类清除树脂。给出了清除树脂在组合化学中的具体应用实例。最后对清除树脂的发展作了展望。     

Rapid and sensitive liquid chromatography-tandem mass spectrometry for the quantitation of epirubicin and identification of metabolites in biological samples

A highly sensitive and selective liquid chromatography-mass spectrometry (LC-MS) method has been developed for the determination of epirubicin in serum and cell specimens using daunorubicin as an internal standard. Using atmospheric pressure chemical ionisation (APCI), the epirubicin metabolites were readily distinguishable by their fragmentation pattern in the mass spectrometer. Selected reaction monitoring (SRM) mode was employed for quantitation of epirubicin and the metabolites. Following extraction, chromatography was performed on a C18 column with a mobile phase consisting of water-acetonitrile-formic acid, pH 3.2, with a flow rate of 200 μl/min. The limit of detection (LOD) and the limit of quantitation (LOQ) of this method in serum were determined to be 1.0 and 2.5 ng/ml, respectively. Linearity of the method was verified over the concentration range of 2.5-2000 ng/ml, with a high correlation coefficient (R² ≥ 0.998). For the extraction procedure, an aliquot of 500 μl serum, spiked with internal standard, was extracted using a chloroform-2-isopropanol (2:1, v/v) mixture. The method has been applied to the analysis of epirubicin in cancer cell samples and the identification of known and unknown metabolites in clinical trial patient serum samples.     

A new method for determination of uric acid by the lactic acid-acetone-BrO(3)(-)-Mn(2+)-H(2)SO(4) oscillating reaction using the analyte pulse perturbation technique

A new analytical method for the determination of uric acid (UA) by the perturbation of UA on the Belousov-Zhabotinsky oscillating reaction is proposed. The method is based on the linear relationship between the changes in the oscillating period and the concentration of UA. The calibration curve is linear over the range of 2.0 × 10⁻⁵ to 5.0 × 10⁻⁴ M, with a detecting limit of 3.28 × 10⁻⁶ M. The method features good precision (R.S.D.: 3.59%) and excellent throughput (10 samples h⁻¹). The possible mechanism of the perturbation of UA on the oscillating reaction is discussed.     

基团的电子效应与单取代苯对位^1H,^13C的化学位移

基团的电子效应与单取代苯对位１Ｈ、１３Ｃ的化学位移＊韩长日冯娇杨钟照平（海南师范学院化学系海口５７１１５８）关键词１Ｈ的化学位移１３Ｃ的化学位移基团电负性共轭效应引言在１Ｈ、１３Ｃ核磁共振谱中，化学位移值的大小主要取决于屏蔽作用的大小，而屏蔽作用的大...     

Chemischer Transport von Cr2O3 mit CrI3/I2 – Experimente und Modellrechnungen zur Beteiligung von CrOI2,g

On the Chemical Transport of Cr₂O₃ with CrI₃/I₂ – Experiments and Model-Calculations for Participation of CrOI_2,g Gaseous chromium oxyiodides that were unknown up to now cause the migration of Cr₂O₃ in the temperature gradient 1 000°C→900°C when iodine (e. g. 0.1 mmol/ml) and CrI₃ is added (eq. (1)). Transport agent for Cr₂O₃ is gaseous CrI₄. With a smaller concentration of iodine (D(I₂) ? 0.016 mmol/ml) and lower temperatures (e.g. T? = 850°C) the influence of H₂O (from the wall of the silica ampoule) becomes more important. Under these conditions the transport of Cr₂O₃ is a result from the endothermic reactions (2), (3) and (4). H_2,g has on the basis of the decomposition of HI_g a positive difference of the solubility and H_2,g should not to be considered as a transport agent. Because of the range of equilibrium-values the reaction 4 has to be taken into consideration. Estimated value of the enthalpie for CrOI_2,g is fixed more precisely by thermodynamic model calculation to Δ_fH°₂₉₈(CrOI_2,g) = ?51.4 kcal/mol. The estimated limit of error for the enthalpie of formation is smaller than ± 5 kcal/mol. Without an addition of CrI₃ is in the system Cr₂O₃/I₂ a migration of Cr₂O₃ not observable.     

Reduced parabolic model for radical addition reactions

The transition state of addition of free radicals and atoms to multiple bonds is considered as a result of intersecting of two parabolic potential curves. One of them characterizes the stretching vibration of the attacked multiple bond, and another curve characterizes the stretching vibration of the bond formed in the transition state. The force constant of the latter is calculated by an empirical equation that correlates the force constant with the bond dissociation energy. In the framework of this model, the thermally neutral activation energy (E _e0) and the elongation of the attacked and formed bonds (r _e) in the transition state were calculated from the experimental data (activation energy (E _e) and enthalpy of reaction (H _e)) for the addition of an H atom and methyl, alkoxyl, aminyl, triethylsilyl, and peroxyl radicals to the C=C bond and the addition of H and CH₃ to the C=O and CC bonds. Analysis of the data obtained showed that E _e0 depends linearly on the |H _e| + E_e sum, i.e., E_e0/kJ mol^–1 = 14.2 + 0.61 · (E_e – H _e), and the bond elongation in the transition state for addition of the most part of radicals to ethylene and acetylene vary within (0.65–0.87)·10_–10 m. The factors affecting the activation energy of the radical addition reactions are discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1542–August, 2004.     

Identification of micro-scale calorimetric devices

Micro-calorimetric devices using Si-based sensors are very useful for the study of gas–solid reactions, in which very low mass of reactants are necessary. But in fact the consequence of using flat detectors is an increase of the uncertainty in the measured energy. In this work a calorimetric gas sensor based on Xensor chip is analysed studying the local x–y contributions of dissipation to the sensitivity related to the value in the centre. We study also the effects of the gas-flow on the sensitivity, comparing the results obtained with two Xensor type chips. Finally we carry out a deeper analysis of the x–y effects on the calorimetric detector for dissipations in the reactant shell extremely close to the detector surface to visualize the link between the power density distribution and the output signal.     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

Orthogonal PbS nanowire arrays and networks and their Raman scattering behavior

Three-dimensional, orthogonal lead sulfide (PbS) nanowire arrays and networks have been prepared by using a simple, atmospheric pressure chemical vapor deposition (APCVD) method. These uniform nanowires (average diameter 30 nm) grow epitaxially from the surface of the initial PbS crystal seeds and form orthogonal arrays and networks in space. The growth mechanism has been explored, and the process was classified as homogeneous, epitaxial growth in the 200 directions. Furthermore, Raman spectra of PbS nanowires are reported here, and their characteristic Raman peak (190 cm(-1), no shoulder) could be used as a unique probe for the study of PbS nanomaterials.