Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

Neutral oxygen atom density in the MESOX air plasma solar furnace facility

The density of neutral oxygen atoms in the MESOX set-up, one device of the PROMES-CNRS solar facilities, was determined by a fiber-optics catalytic probe (FOCP). Plasma was created in a flowing air within a quartz tube with the outer diameter of 5 cm by a 2.45 GHz microwave generator with the output power up to 1000 W. The flow of air was varied between 4 and 20 l/h. The O-atom density was found to increase monotonously with the increasing discharge power, and it decreased with the increasing flow rate. The degree of dissociation of oxygen molecules in the plasma column depended largely on the flow rate. At the air flow of 4 l/h it was about 80% but it decreased to about 20% at the flow of 20 l/h.     

Study of the reaction of chalcone analogs of dehydroacetic acid and o-aminothiophenol: synthesis and structure of 1,5-benzothiazepines and 1,4-benzothiazines

Treatment of α,β-unsaturated carbonyl compounds, obtained by the reaction of DHA and aromatic (or heteroaromatic) aldehydes, with o-aminothiophenol results in the formation of 1,5-benzothiazepines and/or 1,4-benzothiazines depending upon the reaction conditions and structure of the aldehydes. The products were characterized by the combined use of multinuclear 1D and 2D NMR and GIAO/DFT calculations of ¹H, ¹³C and ¹⁵N chemical shifts. The tautomerism of these compounds in solution was determined, they have an exocyclic CC double bond.     

电子探针定量分析的标准样品——几种多元氧化物单晶

在很高的温度和适宜的生长条件下,分别采用熔盐籽晶法和高温引上法生长了高质量的YAP、NAB、KTP、LN、BBO、SBN等多元氧化物单晶,它们具有优良的物理化学性能,严格的化学比,固定的组成与结构以及较好的化学均匀性和电子束轰击下的稳定性。广泛地用于激光和非线性光学领域。我们选用这些晶体为原材料研制电子探针定量分析的标准样品。经过测量和标定,这些单晶标样符合中华人民共和国国家标准GB 4930-85(电子探针显微分析标准样品通用技术条件)的规定。含有稀土元素的标样如NAB和YAP能发出绿色荧光,是电子显微术中理想的阴极发光材料。     

清除树脂在组合化学中的应用

清除树脂是一种特殊的固相试剂。近五年，它们被广泛的用于平行液相法合成组合化学库，简化液相组合化学库的纯化操作。本文综述了清除树脂在纯化操作中的使用策略。根据清除纯化原理，介绍了共价键型和离子键型两类清除树脂。给出了清除树脂在组合化学中的具体应用实例。最后对清除树脂的发展作了展望。     

TaqMan-分子灯标：一种新型的荧光基因检测探针

在TaqMan及分子灯标的基础上开发了一类新型的均相荧光检测探针—— TaqMan-分子灯标(TaqMan-MB)，该探针集合了分子灯标的发夹结构及TaqMan探针降 解作用的工作原理，使检测效果更好．与实时PCR仪联用，可用于靶基因的定量检 测．     

Rapid and sensitive liquid chromatography-tandem mass spectrometry for the quantitation of epirubicin and identification of metabolites in biological samples

A highly sensitive and selective liquid chromatography-mass spectrometry (LC-MS) method has been developed for the determination of epirubicin in serum and cell specimens using daunorubicin as an internal standard. Using atmospheric pressure chemical ionisation (APCI), the epirubicin metabolites were readily distinguishable by their fragmentation pattern in the mass spectrometer. Selected reaction monitoring (SRM) mode was employed for quantitation of epirubicin and the metabolites. Following extraction, chromatography was performed on a C18 column with a mobile phase consisting of water-acetonitrile-formic acid, pH 3.2, with a flow rate of 200 μl/min. The limit of detection (LOD) and the limit of quantitation (LOQ) of this method in serum were determined to be 1.0 and 2.5 ng/ml, respectively. Linearity of the method was verified over the concentration range of 2.5-2000 ng/ml, with a high correlation coefficient (R² ≥ 0.998). For the extraction procedure, an aliquot of 500 μl serum, spiked with internal standard, was extracted using a chloroform-2-isopropanol (2:1, v/v) mixture. The method has been applied to the analysis of epirubicin in cancer cell samples and the identification of known and unknown metabolites in clinical trial patient serum samples.     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.     

Investigations of precipitates in heat treated AgPd30/CuSn6 layers

The subject of the investigations are precipitation zones, which grew as a result of chemical diffusion in AgPd30/CuSn6 bimetals. These precipitation zones have been characterized by metallography, electron probe microanalysis and x-ray diffraction. The growth of precipitation zones in the plating layer and in the substrate layer in dependence on time have been determined. The use of x-ray diffraction alone for the identification of the precipitates could not supply satisfying results in every case. This problem was solved by the application of electron probe microanalysis using a correction method, which allows the estimation of the chemical composition of small particles.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday