Molecular Beam Mass Spectrometry System for Characterization of Thermal Plasma Chemical Vapor Deposition

A molecular beam mass spectrometry system for in situ measurement of the concentration of gas phase species including radicals impinging on a substrate during thermal plasma chemical vapor deposition (TPCVD) has been designed and constructed. Dynamically controlled substrate temperature was achieved using a variable thermal contact resistance method via a backside flow of an argon/helium mixture. A high quality molecular beam with beamtobackground signal greater than 20 was obtained under film growth conditions by sampling through a small nozzle (75 m) in the center of the substrate. Mass discrimination effects were accounted for in order to quantify the species measurements. We demonstrate that this system has a minimum detection limit of under 100 ppb. Quantitative measurements of hydrocarbon species (H, H₂, C, CH₃, CH₄, C₂H₂, C₂H₄) using Ar/H₂/CH₄ mixtures and silicon species (Si, SiH, SiH₂, SiCl, SiCl₂, Cl, HCl) using Ar/H₂/SiCl₄ mixtures were obtained under thermal plasma chemical vapor deposition conditions.     

Study on the effects of fluorine and oxygen deficiency on YBa2Cu307 byab initio method

The calculations of clusters modeling the fluorine-doping and oxygen deficiency of YBa₂Cu₃0₇ have been performed by the method of all-electronab initio Hartree-Fock with self-consistent crystal field. Results show that in CuO planes electric charge significantly increases, the chemical valence of Cu decreases and the covalent bonding of Cu-O greatly weakens owing to oxygen deficiency, while the effect of F restores the local electronic structure of YBa₂Cu₃O₇. The reported opinion that F occupied the oxygen vacancy in Cu-O chains seems disputable according to the calculated bonding characteristics Project supported by the National Natural Science Foundation of China.     

Chemical bond in alkali metal sulfates

In the context of the density functional theory of the local electron density the valence and differential density distribution in crystalline sulfates of M₂SO₄ (M is Li, Rb, and Cs) and double sulfates of MLiSO₄ were calculated using the pseudopotential method in the basis set of numerical atomic pseudo-orbitals. It is shown that in lithium sulfate crystallographically inequivalent oxygen atoms are in different charge states and have a different force of chemical bonding with sulfur. Anions are bonded to each other through lithium atoms that form tetrahedral complexes with oxygen. In rubidium sulfates the electron clouds of the anions overlap and chain structures form. Chemical bonding between the anion and the cation has an ionic nature. These features of the electron structure manifest themselves in double sulfates, where LiO₄ complexes that link the anionic chains also form, and heavy metals serve as cations.     

Molar excess heat capacities and volumes for mixtures of alkanoates with cyclohexane at 25°C

Molar excess volumes V ^E at 25°C have been determined by vibrating-tube densimetry, as a function of mole fraction x for different series of an alkanoate (H _2m+1 C _m COOC _n H _2n+1 )+cyclohexane. Three types of alkanoates were investigated, i.e., methanoates (m=0, with n=3 and 4), ethanoates (m=1, with n=2, 3, and 4) and propanoates (m=2, with n=1, 2, and 3). In addition, a Picker flow calorimeter was used to obtain molar excess heat capacities C _p ^E at constant pressure at the same temperature. V ^E is positive for all systems and rather symmetric, with V ^E (x=0.5) amounting to almost identical values in a series of mixtures containing an alkanoate isomer of same formula (say C₄H₈O₂, C₅H₁₀O₂, or C₆H₁₂O₂). The composition dependence of C _p ^E is rather unusual in that two more or less marked minima are observed for most of the mixtures, especially when the alkanoate is a methanoate or an ethanoate. These results are discussed in terms of possible changes in conformation of both the ester and cyclohexane.     

Zum chemischen Transport von Molybdän mit HgBr2 — Experimente und Modellrechnungen

On the Chemical Transport of Molybdenum using HgBr₂ ? Experiments and Thermochemical Calculations . Mo migrates under the influence of HgBr₂ in a temperature gradient (e.g. 1 000→900°C). Besides elementary Mo we observed in some experiments the occurence of MoBr₂ and MoO₂ (from oxygen containing impurities) respectively. The transport behaviour (deposition sequence; deposition rates of various phases) has been enlightened by continous measurement of the mass change during the transport experiments using a special “transport balance”. Thus obtained deposition rates m(Mo) for molybdenum reached in the temperature region 800 ≤ T ≤ 1 040°C a maximum at T = 980°C independend from the starting material (Mo or Mo/MoO₂ mixtures). For variable densities D of transport agent at a constant temperature (T = 950°C) increasing values for m(Mo) were observed (m(Mo) = 23 mg/h, D_max = 8.61 mg HgBr₂/cm³). Thermochemical calculation give strong evidence for the migration of Mo via the endothermal reaction . The experimental deposition rates are about half as large than the calculated values. Good agreement between calculations and experiments were obtained only assuming the presense of oxygen in the starting materials.     

离子性指数、极化效应指数烷烃^13C NMR化学位移的 关系研究

定义了烷烃分子中碳原子的离子性指数(INI)，用离子性指数(INI)、极化效应指数(PEI)及N^i~H(i=αβΥ)结构信息参数研究了烷烃的^13CNMR化学位移模型，结果表明，烷烃^13CNMR化学位移(CS)可用下式来定量描述：CS=194.6156-37.7394(INI)+98.6505(ΣPEI)+27.1630(INI/ΣPEI)-652.9106(ΣPEI/INI)+0.7735N^α~H+2.2468N^β~H-0.1742N^γ~H。用上式估算了304个碳原子的化学位移，平均绝对误差仅为0.77δ，标准差0.9860δ，预测值与实验值非常吻合。     

Molecular-beam mass spectrometry of van der Waals clusters. Mass spectrum of hydrogen sulfide dimer

Hydrogen sulfide clusters generated by ultrasonic expansion of an H₂S-Ar mixture into a vacuum were detected by electron impact mass spectrometry. The mass spectrum of the dimer, (H₂S)₂, was obtained under conditions of predominant dimerization. A mechanism of the formation of ions that involves intracluster reactions between the fragment ions of the monomer and the monomer molecule has been suggested.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 839–844, May, 1995.The work was carried out with the financial support of the Russian Foundation for Basic Research (Project No. 93-03-4933). The authors are also grateful to the European Environmental Research Organisation (EERO) for support.     

Synthesis and Electrochemical Studies of Spinel LiNi1−xMnxVO4

Spinel compound LiNi_1−xMn_xVO₄ (0≤x≤0.4) had been prepared by using the moist chemical method. X-ray diffraction spectra showed that the lattice constant increased with x in the LiNi_1−xMn_xVO₄, XPS spectra indicating that Li1s had a chemical shift towards lesser binding energy, and manganese in LiNi_1−xMn_xVO₄ existing as the mixed valence of Mn²⁺ and Mn³⁺. The electrochemical charge and discharge testing at a current density of 0.1 mA/cm² between the potentials of 4.0 and 3.0 V vs Li/Li⁺ in 1 mol/dm³ LiPF₆/EC+DEC (1:1 by volume) at 25°C showed that LiNi_1−xMn_xVO₄ cell has a better rechargeability, but a lower cell voltage of 4.0 V vs Li/Li⁺ than that without the doping sample, and the capacity and the cycle efficiency of the Li/LiNi_1−xMn_xVO₄ cells increased with x in the LiNi_1−xMn_xVO₄.     

Calculation of circular dichroism spectra of michellamines A and C, based on a complete conformational analysis

The first quantum chemical calculation of the circular dichroism (CD) spectra of michellamines has been achieved, based on a complete quantum chemical conformational analysis. Michellamines are dimeric naphthylisoquinoline alkaloids and thus naturally occurring quateraryls, with a large molecular size and flexibility and equipped with stereogenic centers and axes.