Thermodynamic evaluation of a partial charge model assumptionfor the dissolved silica system

The Partial Charge Model was developed to predict the hydroxylation, polymerization, and precipitation of ions. The purpose of this study is to evaluate the Partial Charge Model for describing the polymerization of silica in aqueous solutions. The Partial Charge Model predicts the stability of ions and complexes based on the assumption that the stable species will have the same electronegativity as the mean electronegativity of the solution. The silica system was chosen for model validation because of the rare availability of self-consistent thermodynamic data on many dissolved but polymerized silicate anions, including both linear and cyclical species. The electronegativity of each species was calculated using the Partial Charge Model and the results were plotted against the stability constants for the ions. The silicate anions segregated into groups on the plot based on the number of charges per silicon atom in the polymer. Plots of the log of the stability constant versus the change in electronegativity produced a linear relationship for the silica polymers containing one negative charge per silicon atom, which resulted in an r ² of 0.9978. Thus, the Partial Charge Model successfully describes the thermodynamics of silica polymerization in aqueous solution for species that are sufficiently alike, but was not accurate for all silica species.     

A Combined Experimental and Theoretical Electron Density Study of Intra‐ and Intermolecular Interactions in Thiourea S,S‐Dioxide

The thiourea S,S‐dioxide molecule is recognized as a zwitterion with a high dipole moment and an unusually long C? S bond. The molecule has a most interesting set of intermolecular interactions in the crystalline state—a relatively strong O???H? N hydrogen bond and very weak intermolecular C???S and N???O interactions. The molecule has C_s symmetry, and each oxygen atom is hydrogen‐bonded to two hydrogen atoms with O???H? N distances of 2.837 and 2.826 Å and angles of 176.61 and 158.38°. The electron density distribution is obtained both from Xray diffraction data at 110 K and from a periodic density functional theory (DFT) calculation. Bond characterization is made in terms of the analysis of topological properties. The covalent characters of the C? N, N? H, C? S, and S? O bonds are apparent, and the agreement on the topological properties between experiment and theory is adequate. The features of the Laplacian distributions, bond paths, and atomic domains are comparable. In a systematic approach, DFT calculations are performed based on a monomer, a dimer, a heptamer, and a crystal to see the effect on the electron density distribution due to the intermolecular interactions. The dipole moment of the molecule is enhanced in the solid state. The typical values of ρ_b and H_b of the hydrogen bonds and weak intermolecular C???S and N???O interactions are given. All the interactions are verified by the location of the bond critical point and its associated topological properties. The isovalue surface of Laplacian charge density and the detailed atomic graph around each atomic site reveal the shape of the valence‐shell charge concentration and provide a reasonable interpretation of the bonding of each atom.     

Liquid fluidized bed starter culture ofTrichoderma reesei for cellulase production

A starter culture ofTrichoderma reesei (Rut-C30) prepared in a liquid fluidized bed reactor (LFBR) gave better growth and greater cellulase production in submerged fermentation than a conventional shake flask inoculum. The LFBR starter was prepared by first coatingT. reesei spores to 0.25 mm size corncob (1.0x10⁸g^-1) in a medium containing 1.0% corncob, 0.5 gL^-1 xylose and 0.1 gL^-1 lactose in a balanced salt solution, then fluidizing the particles in the LFBR for 36 h to allow germination of the spores, and covering the particles with an approx 30 μm thick biofilm. This biofilm that developed in constant adherence to the lignocellulosic carrier, apparently became well adapted to grow rapidly on insoluble cellulose substrates (Solca Floc), and had the enzymes of the cellulase complex induced for increased cellulase production. The LFBR starter used in a stirred tank reactor (STR) gave 15 gL^-1 biomass production and 6.5 IU mL^-1 overall cellulase activity with a volumetric productivity of 64 IU L^-1h^-1 in a 5 d fermentation, compared with a 7 d shake flask inoculum that gave 11 gL^-1 biomass and 3.2 IU mL^-1 cellulase activity, with a volumetric productivity of 31IU L^-1h^-1. The LFBR starter culture retained its viability in dry storage for 6–9 mo.     

Intrinsic Surface Reaction Constant in 1-pK Model of Mg-Fe Hydrotalcite-like Compounds

The relationship among intrinsic surface reaction constant (K) in 1-pK model, point of zero net charge (PZNC) and structural charge density (σst) for amphoteric solid with structural charges was established in order to investigate the effect of σst on pK. The theoretical analysis based on 1-pK model indicates that the independent PZNC of electrolyte concentration (c) exists for amphoteric solid with structural charges. A common intersection point (CIP) should appear on the acid-base titration curves at different c, and the pH at the CIP is pHPZNC. The pK can be expressed as pK=-pHPZNC log[(1 2αPZNC)/(1-2αPZNC)], where αPZNC≡σst/eNANs, in which e is the elementary charge, NA the Avogadro‘s constant and Ns the total density of surface sites. For solids without structural charges, pK=-pHPZNC. The pK values of hydrotalcite-like compounds (HTlc) with general formula of [Mg1-xFex(OH)2](Cl,OH)x were evaluated. With increasing x, the pK increases, which can be explained based on the affinity of metal cations for H^- or OH^- and the electrostatic interaction between charging surface and H^- or OH^-.     

Extension of conjugation leading to bathochromic or hypsochromic effects in OPV series

Four OPV series 1-4 (a-d) with a terminal dialkylamino group as electron donor were prepared by Wittig-Horner reactions. To study the influence of the push-pull effect on the long-wavelength absorption, three of the four series contained terminal acceptor groups (CN, CHO, NO(2)). The length of the chromophores strongly affects the intramolecular charge transfer (ICT)-an effect which superimposes upon the extension of the conjugation. Increasing numbers n of repeat units cause an overall bathochromic shift for the purely donor-substituted series 1 a-4 a and the series 1 b-4 b with CN as weak acceptor. The two effects annihilate each other in the series 1 c-4 c with terminal CHO groups, so that the absorption maxima are almost independent of the length of the chromophore. A hypsochromic shift is observed for the series 1 d-4 d, which contains the strong acceptor group NO(2). This anomaly disappears on protonation of the dialkylamino group because the push-pull effect disappears in the ammonium salts. The results can be explained by semiempirical quantum mechanics (AM1, INDO/S). The HOMO-LUMO transition, which is mainly responsible for the ICT, becomes less important in the electron transitions S(0)-->S(1) when the distance between donor and acceptor is increased. The commonly used VB model, which contains an electroneutral and a zwitterionic resonance structure, is contrasted with a MO model with dipole segments at both ends of the OPV chains. The latter model turned out to be more appropriate-at least for donor-acceptor-substituted OPVs with n >/= 2.     

Experimental and theoretical charge density study of the neurotransmitter taurine

The experimental electron density distribution in taurine, 2-aminoethane sulfonic acid, 1, has been determined from high-resolution X-ray diffraction data collected at a temperature of 100 K. Taurine crystallizes as a zwitterion in the monoclinic space group P2(1)/c. Topological analysis of the experimental electron density and a comparison with high-level theoretical gas-phase calculations show that the crystal environment has a significant influence on the electronic configuration of the sulfonate moiety in 1, which in the crystal is more delocalized than in the gas phase. This crystal effect is mainly due to hydrogen bonding.     

New Amphiphilic Polypyridyl Ruthenium（Ⅱ） Sensitizer and Its Application in Dye-Sensitized Solar Cells

Amphiphilic polypyridyl mthenium（Ⅱ） complex cis-di（isothiocyanato）（4,4＇-di-tert-butyl-2,2＇-bipyridyl）（4,4＇- dicarboxy-2,2＇-bipyridyl）ruthenium（Ⅱ）（K005） has been synthesized and characterized by cyclic voltammetry, ^1H NMR, UV-Vis, and FT-IR spectroscopies. The sensitizer sensitizes TiO2 over a notably broad spectral range due to its intense metal-to-ligand charge-transfer （MLCT） bands at 537 and 418 nm. The photophysical and photochemical studies of K005 were contrasted with those of cis-Ru（dcbpy）2（NCS）2, known as the N3 dye, and the amphiphilic ruthenium（Ⅱ） dye Z907. A reversible couple at E1/2=0.725 V vs. saturated calomel electrode （SCE） with a separation of 0.08 V between the anodic and cathodic peaks, was observed due to the Ru^Ⅱ/Ⅲ couple by cyclic voltammetry. Furthermore, this amphiphilic ruthenium complex was successfully used as sensitizers for dye-sensitized solar cells with the efficiency of 3.72% at the 100 mW·cm^-2 irradiance of air mass 1.5 simulated sunlight without optimization of TiO2 films and the electrolyte.     

Hydrolytically stable, diaminocarboxylic acid-based membranes buffering in the pH range from 6 to 8.5 for isoelectric trapping separations

Diaminocarboxylic acid carrier ampholytes, such as L-histidine, 2,3-diaminopropionic acid, L-ornithine, and L-lysine, were reacted with glycerol-1,3-diglycidyl ether (GDGE) and poly(vinyl alcohol) (PVA) in the presence of sodium hydroxide to produce hydrolytically and mechanically stable hydrogels, supported on a PVA substrate, for use as buffering membranes in isoelectric trapping (IET) separations. The pH values of the DACAPVA membranes were determined with the help of small-molecule pI markers and proteins and were found to be in the 6 < pH < 8.5 range. The membranes were successfully used to isoelectrically trap small ampholytes, desalt ampholyte solutions in IET mode, and effect the binary separation of chicken egg white proteins.     

Emission band shape probes of the mixed-valence excited state properties of polypyridyl-bridged bis-ruthenium(II) complexes

The absorption spectra and emission spectral band shapes of several polypyridine-ligand (PP) bridged bis-ruthenium(II) complexes imply that the Ru(II)/Ru(III) electronic coupling is weak in their lowest energy metal to ligand charge transfer (MLCT) excited states. Many of these PP-bridging ligands contain pyrazine moieties and the weak electronic coupling of the excited states contrasts to the strong electronic coupling inferred for the correlated mixed-valence ground states. Although the bimetallic complexes emit at significantly lower energy than their monometallic analogs, the vibronic contributions to their 77 K emission spectra are much stronger than expected based on comparison to the monometallic analogs (around twofold in some complexes) and this feature is characteristic of bimetallic complexes in which the mixed-valence excited states are electronically localized. The weaker excited state than ground state donor/acceptor electronic coupling in this class of complexes is attributed to PP-mediated super-exchange coupling in which the mediating orbital of the bridging ligand (PP-LUMO) is partly occupied in the MLCT excited states, but is unoccupied in the ground states; therefore, the vertical Ru(III)-PP⁻ (MLCT) energy is larger and the mixing coefficient smaller in these excited states than is found for Ru(II)-PP in the corresponding ground states.