Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

Gas Phase Catalysis by Metal Nanoparticles in Nanoporous Alumina Membranes

Nanoporous alumina membranes, loaded with palladium and ruthenium nanoparticles of various size, were used for gas phase hydrogenation of 1, 3‐butadiene and for oxidation of carbon monoxide, respectively. Those membranes contain 10⁹ ‐ 10¹¹ pores per cm², all running perpendicular to the surface. Membrane discs of 20 mm in diameter and only 60 μm thick, incorporated in a reactor in which the reactants can be pumped in a closed circuit through the pores, turned out to very actively catalyze hydrogenation of butadiene (Pd) and oxidation of CO (Ru). The activity of the Pd catalysts depends characteristically on the particles size, the gas flow, and of the educts ratio. As could be expected, larger particles are less active than smaller ones, whereas increasing gas flows in case of hydrogenation accelerates the reactions. Excessive hydrogen reduces selectivity with respect to the various butenes, but favours formation of butane.     

Interaction of long chain alkylammonium cations with reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared using lithium thermal treatment. The sorption of octylammonium (OA), dodecylammonium (DDA) and hexadecylammonium ions (HDA) on differently charged samples were studied. The amounts of DDA and HDA sorbed on each RCM exceed the cation exchange capacity (CEC) but that of OA exceeds only the CEC of samples with the lowest CEC. The sorption is affected not only by the layer charge but also by the formation of collapsed interlayer spaces in the lowest charged montmorillonites. X-ray measurements confirmed the decrease of the layer charge after lithium thermal treatment and the layer charge heterogeneity in RCMs.     

DPPH (= 2,2‐Diphenyl‐1‐picrylhydrazyl = 2,2‐Diphenyl‐1‐(2,4,6‐trinitrophenyl)hydrazyl) Radical‐Scavenging Reaction of Protocatechuic Acid Esters (= 3,4‐Dihydroxybenzoates) in Alcohols: Formation of Bis‐alcohol Adduct

Protocatechuic acid esters (= 3,4‐dihydroxybenzoates) scavenge ca. 5 equiv. of radical in alcoholic solvents, whereas they consume only 2 equiv. of radical in nonalcoholic solvents. While the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents as compared to that in nonalcoholic solvents is due to a nucleophilic addition of an alcohol molecule at C(2) of an intermediate o‐quinone structure, thus regenerating a catechol (= benzene‐1,2‐diol) structure, it is still unclear why protocatechuic acid esters scavenge more than 4 equiv. of radical (C(2) refers to the protocatechuic acid numbering). Therefore, to elucidate the oxidation mechanism beyond the formation of the C(2) alcohol adduct, 3,4‐dihydroxy‐2‐methoxybenzoic acid methyl ester ( 4 ), the C(2) MeOH adduct, which is an oxidation product of methyl protocatechuate ( 1 ) in MeOH, was oxidized by the DPPH radical (= 2,2‐diphenyl‐1‐picrylhydrazyl) or o‐chloranil (= 3,4,5,6‐tetrachlorocyclohexa‐3,5‐diene‐1,2‐dione) in CD₃OD/(D₆)acetone 3 : 1). The oxidation mixtures were directly analyzed by NMR. Oxidation with both the DPPH radical and o‐chloranil produced a C(2),C(6) bis‐methanol adduct ( 7 ), which could scavenge additional 2 equiv. of radical. Calculations of LUMO electron densities of o‐quinones corroborated the regioselective nucleophilic addition of alcohol molecules with o‐quinones. Our results strongly suggest that the regeneration of a catechol structure via a nucleophilic addition of an alcohol molecule with a o‐quinone is a key reaction for the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents.     

Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Analysis by liquid chromatography‐tandem mass spectrometry of biophenolic compounds in virgin olive oil,Part II

In this study the qualitative and quantitative content of the biophenolics in virgin olive oils is evaluated by liquid chromatography‐tandem mass spectrometry. The extraction and purification method for these compounds from virgin oils was optimised. After liquid‐liquid and solid‐phase extraction the separation of 35 of these compounds was achieved on reversed phase in gradient mode. The detection was preliminarily by UV and fluorescence, but then the final choice was ion‐spray tandem mass spectrometry in multiple reaction monitoring mode in negative ionization, acquiring two diagnostic product ions from the chosen precursor [M—H]^–. Using this last approach we obtained the best sensitivity, selectivity, and specificity. The recovery of the method ranged from 70–90% and detection limits were less than 1 ng for all the analyzed compounds.     

Phase Transition and Crystal Structure of the Monomeric Europium(II) Thiolate Eu(SC36H49)2

Single crystal X‐ray diffraction of Eu(SC₃₆H₄₉)₂ has revealed a first order phase transition at a temperature of 119 K, that involves a reduction of the specific volume by 1 %. The transition corresponds to a doubling of the unit cell, as it is the result from reorientations of isopropyl groups that appear at peripheral sites of the organic ligands. It is argued that a denser packing is achieved at the expense of a less favourable conformation of one of the two crystallographically‐independent complexes in the low‐temperature phase. The Bond‐Valence method is used to show that interactions of equal strengths are present between europium and both sulphur atoms and both coordinating phenyl rings.