锐钛矿型TiO2担载的Pd催化剂用于乙炔选择加氢的催化性能及其表征

Anatase TiO₂ nanospindles containing 89% exposed {101} facets (TiO₂-101) and nanosheets with 77% exposed {001} facets (TiO₂-001) were hydrothermally synthesized and used as supports for Pd catalysts. The effects of the TiO₂ materials on the catalytic performance of Pd/TiO₂-101 and Pd/TiO₂-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene. The Pd/TiO₂-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield. To understand these effects, the catalysts were characterized by H₂ temperature-programmed desorption (H₂-TPD), H₂ temperatureprogrammed reduction (H₂-TPR), transmission electron microscopy (TEM), pulse CO chemisorption, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The TEM and CO chemisorption results confirmed that Pd nanoparticles (NPs) on the TiO₂-101 support had a smaller average particle size (1.53 nm) and a higher dispersion (15.95%) than those on the TiO₂-001 support (average particle size of 4.36 nm and dispersion of 9.06%). The smaller particle size and higher dispersion of Pd on the Pd/TiO₂-101 catalyst provided more reaction active sites, which contributed to the improved catalytic activity of this supported catalyst.     

反-4-(反-4'-正丙基环已基)环已醇的合成与表征

环己烷类液晶因具有高度的稳定性,较宽的相列相温区而受到人们的青睐。反-4-(反-4’-正丙基环己基)环己醇(trans-3HHE)是一种合成环己烷类液晶的重要中间体,它可通过酶选择性催化和顺式构型异构化二种方法合成。文献报道顺式构型异构化法是：4-(反-4’-正丙基环己基)苯酚以铑／碳或铑／氧化铝为催化剂,在酸性介质条件下进行加氢反应,     

有机溶剂法无水氯化镁的制备与表征

Ammonium carnallite was synthesized by hydrated magnesium chloride in salt lake and ammonium chloride solution. Dehydrated ammonium carnallite was dissolved in methanol under low temperature by feeding ammonia, to prepare anhydrous magnesium chloride. The results show that anhydrous magnesium chloride contains magnesium oxide in an amount less than 0.1% by weight, the yield of magnesium chloride was above 99.5%. Ammonium carnallite, ammoniation magnesium chloride and anhydrous magnesium chloride were characterized by thermoanalysis, X-ray powder diffraction and scanning electron microscopy.     

Novel nanocomposite membranes from cellulose acetate and clay‐silica nanowires

In this study, a new class of heterogeneous membranes based on cellulose acetate (CA) polymer and a complex filler clay‐silica nanowires (SiO₂NWs) was investigated for potential biomedical applications. SiO₂NWs were synthesized using natural clay through a facile sol–gel method and were dispersed in the polymer solution by sonication in the 1.25, 2.5, and 5% weight ratio to the CA acetate polymer. Membranes were subsequently prepared via phase inversion by precipitation of the CA polymer in water. The pristine CA membrane and SiO₂NWs based nanocomposites membranes were characterized using different characterization techniques. The presence of the SiO₂NWs in the CA membrane was found to significantly enhance the protein retention, water wettability and thermal as well as mechanical properties in comparison to the pristine CA membrane. Water flows studies at different temperatures and the retention of bovine serum albumin have been studied and the nanocomposite membranes were found to exhibit superior performances compared with the pristine CA membranes. SiO₂NWs‐CA membranes showed a much higher stability to the water temperature change during separation than CA membranes. Morphological changes clearly revealed that the composite membrane were much more compact than the pristine CA membranes. The rabbit dermal fibroblasts cell viability in cultures after 72 hr of incubation was found to be greater than 80%. These newly synthesized composite membranes exhibit a high potential to be used for various medical applications because of their non‐cytotoxic characteristics. Copyright © 2016 John Wiley & Sons, Ltd.     

升华剂2,4,6-三异丙基-1,3,5-三氧六环的晶体结构及其热力性质研究

以升华剂2,4,6-三异丙基-1,3,5-三氧六环为溶质,无水乙醇为溶剂,采用溶液挥发法培养了2,4,6-三异丙基-1,3,5-三氧六环的单晶.利用X-射线单晶衍射法测定其单晶结构,并通过紫外光谱、热重和X-射线粉末衍射等手段对其进行了表征.结果表明,标题化合物属于正交晶系,Pnma空间群,晶胞参数:a=0.827 7(3)nm,b=1.024 4(3)nm,c=1.683 1(5)nm,α=β=γ=90°,V=1.427 1(8)nm~3,Z=42,Mr=216.81,Dc=1.007g/cm~3,μ=0.070mm~(-1),F(000)=480.0,T=293(2)K,最终偏差因子(对I2σ(I)的衍射点)R1=0.083 7,wR2=0.264 8.化合物分子中的六元环呈椅式构型,分子间存在的弱氢键作用使得其沿c轴方向形成了一维无限链状结构.通过测量其饱和蒸气压随温度变化,按Clausius-ClaPeyron方程计算得出其升华焓为15.82kJ/mol,再结合热重TGA-DTA曲线、DSC曲线和焓变分析,可以判定升华剂在80℃之前没有发生分解产生新的物质.     

沉淀法制备纳米氧化铬粉体的影响因素

以Cr(NO3)3·9H2O为原料,以氨水为沉淀剂,聚乙二醇为分散剂,采用沉淀法制备了纳米Cr2O3粉体.研究了反应物浓度、分散剂用量、晶种、煅烧温度及保温时间等因素对合成纳米Cr2O3粉体晶粒度的影响,用场发射扫描电镜(FE-SEM)、X射线衍射仪(XRD)和比表面积测试仪(BET)等手段对其进行表征.结果表明:随反应物浓度(0.2～0.6 mol/L)的增加,纳米Cr2O3粉体的晶粒度增加;在反应物溶液中加入适量的分散剂及用加入1wt;的分散剂的去离子水洗涤前驱体,所得的纳米Cr2O3粉体的晶粒度减小;加入晶种有利于纳米Cr2O3粉体晶体的发育;随煅烧温度的升高及保温时间的延长,纳米Cr2O3粉体的晶粒度增加.在反应物浓度为0.4 mol/L、晶种加入量为1;、分散剂加入量为3;、煅烧温度为450 ℃及保温时间为1 h时可以得到晶粒度为20～50 nm,分散良好的纳米Cr2O3粉体.     

燃烧法制备掺杂Y改性LaMgB5O10粉体及表征

以水合硝酸镧(La(NO3)3·nH2O)、六水硝酸镁(Mg(NO3)2·6H2O)为氧化剂,甘氨酸(C2H5NO2)为还原剂,掺杂氧化钇(Y2O3)粉体,通过燃烧法合成掺杂Y改性的硼酸镁镧(LaMgB5O10)粉体.研究了Y的掺杂量、焙烧温度和时间等工艺参数对合成Y改性LaMgB5O10的影响.通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、荧光光谱(PL)、紫外-可见漫反射光谱(UV-Vis DRS)等手段对产物进行表征.结果表明,当Y的掺杂量为5;,焙烧温度900 ℃,焙烧时间5 h时,Y改性LaMgB5O10效果最佳.Y改性LaMgB5O10在212~317 nm处出现了很强的紫外吸收峰;在280~355 nm和368~435 nm处有很强的发射宽峰.     

Synthesis by organic molten salt method and characterization of chalcopyrite AgInS2 nanorods

In this paper, chalcopyrite AgInS₂ nanorods were synthesized for the first time by a one‐step, ambient pressure, environment friendly organic molten salt (OMS) method at 200 °C. The as‐synthesized products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. The XRD results reveal that the as‐synthesized products at 120–160 °C under ambient pressure contain AgIn₅S₈ which will decrease with the increase of growth temperature. A sample containing only the chalcopyrite AgInS₂ phase is successfully obtained at 200 °C. Furthermore, the elemental compositions are found to become increasingly stoichiometric with increasing temperature. UV‐Vis and photoluminescence (PL) spectra are utilized to investigate the optical properties of AgInS₂ nanorods. By testing on UV‐Vis spectra, it is concluded that the limiting wavelength of the AgInS₂ nanorods is 661 nm and the band gap is 1.88 eV. A broad red emission band peak centered at about 1.874 eV (662 nm) is clearly observed at room temperature, and the intensity of the emission increases with excitation wavelength. In addition, the photoluminescence quantum yield (PLQY) of the nanocrystals at the excitation wavelength of 250 nm was determined to be 13.2%. A possible growth mechanism of AgInS₂ nanorods was discussed. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Carbon dioxide adsorption studies on delafossite CuFeO2 hydrothermally synthesized

Delafossite CuFeO₂ oxide was synthesized by a hydrothermal technique using Cu₂O and FeOOH as precursors with the addition of fused NaOH as mineralizer. The amount of rhombohedral and hexagonal delafossite phase formed depends on the synthesis time lapses between 2 and 5 days and on the NaOH concentration. The compounds obtained were analyzed with Raman Spectroscopy, X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) in order to obtain their morphological and structural properties. Optical behavior was studied by UV–vis Spectroscopy and gas adsorption measured with a Quartz-Crystal Microbalance (QCM). Our results show that this type of hydrothermal synthesis is capable of recreating the delafossite-type structure of copper-iron oxide and produces a high yield of material with the right stoichiometry. The highest uptake of carbon dioxide is observed on the sample with the highest ratio between rhombohedral and hexagonal delafossite phase.