Preparation of glycopolymer‐coated magnetite nanoparticles for hyperthermia treatment

In this article, magnetite nanoparticles (MNPs) coated with glycopolymer bearing glucose moieties were designed with optimal structural, colloidal, and magnetic properties for biomedical applications. MNPs with an average size of 17 ± 2 nm were synthesized by thermal decomposition process and then their surfaces were modified with active vinyl groups. Two different monomers were immobilized onto the surfaces: dopamine methacrylamide, a monomer with properties inspired on mussels adhesive capacity, or unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]‐oxy}ethyl methacrylate. Afterward, the glycomonomer were polymerized at the interface of both vinyl functionalized MNPs by conventional radical polymerization. The resultant hybrid NPs were water dispersible presenting good stability in aqueous solution for long time periods. Moreover, the high density of carbohydrates at the surface of the magnetic NPs could confer targeting properties to the system as demonstrated by studies of their binding interactions with lectins, where the binding activity is higher as the glycopolymer content augments. The magnetic and magneto‐thermal properties of the synthesized hybrid NPs were evaluated. The magnetization curves reveal superparamagnetic features at 300 K, with high values of saturation magnetization. Furthermore, the hybrid glycoparticles show suitable heat dissipation power when exposed to alternating magnetic field conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Construction of Three Single‐Chain Antibody Fragment Variable Fusion Structures for Sensitive Detection of Nucleocapsid Protein of Hantaan Virus

Abstract

Three single‐chain fragment variable (scFv) fusion structures were constructed for use in rapid and sensitive detection of nucleocapsid protein (NP) of Hantaan virus. The detection of NPs on glass chips was signalized by enzyme labeling or fluorescence dye Cy3, or Cy5 cluster nanoparticles. The sensitivity of the methods with different signal systems was evaluated and compared. The detection limits of scFv‐alkaline phosphatase fusion, fluorescence labeling (scFv‐Cy3), and nanoparticles labeling (scFv‐SBP‐streptavidin‐nanoparticle) were 0.1 µg/mL, 1 ng/mL, and 0.1 ng/mL NP, respectively, which were all lower than that in a conventional enzyme‐linked immunosorbent assay (ELISA) (1 µg/mL). Twenty Hantaan virus isolates were detected using the proposed methods.     

Fluorocarbon polymerizable surfactants: viscometric behavior, micellar polymerization and interactions with associating polymers

 The micellar aggregation of two fluorocarbon surfactants bearing a polymerizable acrylamido group and differing only in the degree of amido substitution (CONH or CONC₂H₅) has been investigated by viscometry. The two surfactants exhibit distinct solution properties with a micellar growth occurring at a much lower concentration for the N-monosubstituted sample which shows in addition a shear thickening and rheopectic behavior. The ability of the latter surfactant to form hydrogen bonding is responsible for this difference in behavior. Micellar copolymerization of acrylamide with these surfactants or with a hydrocarbon analogue gives copolymers with a polysoap-like behavior. The copolymers in aqueous solution show a pronounced intramolecular hydrophobic aggregation expressed by relatively low-viscosity values when compared with those of other hydrophobically modified water-soluble polymers reported in the literature. Surfactant–polymer mixed systems do not show a strong incompatibility between fluorocarbon and hydrocarbon moieties. Received: 24 March 1998 Accepted: 30 June 1998     

Surface Modification of Nitrile Rubber by Plasma Polymerization

Radio frequency plasma polymerization of vinylidene fluoride was used to modify the surface properties of nitrile rubber. The chemistry and frictional properties of the plasma films were characterized. FTIR transmission spectra and EDX analysis of plasma polymer films deposited on NaCl windows showed that the degree of fluorination of the plasma polymers increased as plasma power was increased from 25 to 50 W, and then decreased monotonically at higher powers. An estimation of the actual F/C ratio from EDX data indicated that the plasma polymer films contained approximately one fluorine atom for every 2–5 carbon atoms. Sliding friction tests on a Delrin countersurface showed that the coefficient of friction of the plasma treated rubbers was lower than untreated rubber, but slighly higher than rubber coated with silicone oil. Repetitive sliding friction testing showed that silicone oil treated samples had a longer lubricating lifetime than plasma treated samples. However, cyclic friction tests conducted with nitrile rubber o-rings yielded similar frictional behavior and lubricating lifetimes for silicone oil and plasma treatments. There was no correlation between chemical composition and the frictional and wear properties of the plasma films. Environmental scanning electron micrographs showed that the plasma films were brittle and tended to crack and flake off during wear testing.     

双环戊二烯开环歧化聚合反应及合成聚合物性能研究

采用WCl6－ArOH／Et2AlCl（ArOH：2，6-二叔丁基对甲苯酚）催化体系进行了双环戊二烯的开环歧化聚合反应，考察了单体纯度以及催化体系支载化对聚合反应和合成聚合物性能的影响。在极限聚合浓度下，研究了单体与主、助催化剂摩尔比等因素对聚合反应及合成聚合物性能的影响。实验结果表明：单体纯度越高所得聚合物的机械性能越好；催化体系经聚合物支载化后能显著提高催化体系的催化聚合活性及合成聚合物的机械性能。     

SIS-PAn导电橡胶复合物的制备和性能

用原位聚合方法在SIS（苯乙烯-异戊二烯-苯乙烯嵌段共聚物）橡胶基体中合成聚苯胺（PAn），可形成均匀复合的SIS－PAn导电橡胶膜．成膜后紧朝玻璃的膜面导电，而朝向空气的膜面却绝缘．膜中PAn的含量只有5．8％（质量分数）或An／SIS的投料比为0.2时，导电复合物膜的表面电阻和导电率即可分别达到300Ω／□和0.07S·cm~(－1)分析了制备条件，包括PAn含量、酸量、氧化剂用量、表面活性剂用量、交联剂用量和模具材料等因素对SIS－PAn复合物导电性能的影响．     

Cationic polymerization of hydrocarbon monomers induced by complexes of acyl halides with Lewis acids

The ionic complex of mesitoyl bromide with aluminum bromide in a 1∶1 composition (Mst-1) does not initiate the isobutylene polymerization inn-hexane or methylene dichloride at −78 °C. The corresponding ionic complex of the 1∶2 composition (Mst-2) acts as a cationogenic initiator of the polymerization. The addition of excess Lewis acid or introduction of organic electron acceptors increases the initiating activity of the Mst-1 complex and activates acyl complexes of the 1∶2 composition including Mst-2. The results are discussed in terms of the effect of specific solvation on the nucleophilicity of counteranions, which makes the addition of the monomer to the carbocation possible. For Part 9, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 52–56, January, 1998.     

Cationic amino-containing N-isopropyl- acrylamide–styrene copolymer latex particles: 1-Particle size and morphology vs. polymerization process

 Cationic hydrophilic copolymer latexes were synthesized at 70 °C either by batch or two-step emulsifier-free emulsion poly-merization of styrene (St), N-iso-propylacrylamide (NIPAM), and aminoethylmethacrylate hydro-chloride (AEM) using 2,2′-azobis (2-amidinopropane) dihydrochloride as initiator. At first, batch polymerization kinetics were followed by gas chromatography (GC), revealing that NIPAM rapidly homopolymerized, before the polymerization of styrene had started. Particle size analysis by quasi-elastic light scattering (QELS) and transmission electron microscopy (TEM) showed that monodispersed particles were obtained with the formation of a poly[NIPAM] rich shell. Adding a small amount of the cationic monomer caused a strong decrease of the particle size without affecting the size monodispersity. When a shot process was used, a narrow particle size distribution was maintained, provided that the monomer addition was performed at a relatively high conversion of the first batch step. The poly[NIPAM] rich shell layer was larger with the shot process, but increasing the amino-containing monomer in the recipe resulted in a dramatic decrease of the thickness. Combination of transmission, scanning and atomic force microscopy techniques showed that these hydrophilic particles exhibited odd-shaped structures, the unevenness being dependent upon the performed process. Kinetic data and particle morphology information were inferred for discussion of the polymerization mechanism of this system. Received: 21 August 1997 Accepted: 22 October 1997     

The chemical synthesis of a cyclic oligosaccharide derivative with branching

A cyclic oligosaccharide derivative was synthesized by cationic ring-opening polymerization of an anhydrodisaccharide derivative under high vacuum in dichloromethane with 20 mol% of PF₅ as initiator. Analysis of the spectral results showed that the oligomer chain is composed of only 3 glucose units connected by -1,6 linkages with a glucopyranosyl branching unit at C-4 of each sugar residue in the main chain.     

Calorimetric study of cross-linking polymerization of methyl methacrylate in the presence of a multimonomer

The kinetics of free-radical cross-linking polymerization of methyl methacrylate (MM) in the presence of poly[2-(10-undecenoyloxy)ethyl methacrylate] (PUDEM) as a macromolecular cross-linker has been isothermally examined within the temperature range from 85–100°C using the differential scanning calorimetry (DSC). The activation energy found for this reaction, E _a=89.3 kJ mol^–1, exceeds slightly the literature values of activation energy obtained for the mass polymerization of MM without any cross-linking agent. The activation energy has been also determined by the isoconversion method. It has been found that E _a decreases with the increase in the conversion, which may indicate a change in the reaction mechanism.This work was partly supported by the Committee for Research (KBN) in the framework of project No. 7 T08E 026 20