Near-crater discoloration of white lead in wall paintings during laser induced breakdown spectroscopy analysis

During Laser-Induced Breakdown Spectroscopy (LIBS) analysis of white lead pigment (basic lead carbonate, 2PbCO₃·Pb(OH)₂), used in wall paintings of historical interest, a yellow–brown discoloration has been observed around the crater. This phenomenon faded after a few days exposure under ambient atmosphere. It was established that the mechanism of this discoloration consists in lead oxides (PbO) formation. It was verified by further experiments under argon atmosphere that recombination of lead with oxygen in the plasma plume produces the oxides, which settle around the crater and induce this discoloration. The impact of discoloration on the artwork's aesthetic aspect and the role of atmosphere on discoloration attenuation are discussed. The mechanism is studied on three other pigments (malachite, Prussian blue and ultramarine blue) and threshold for discoloration occurrence is estimated.     

Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

Conductometric study of cationic and anionic complexes in propylene carbonate

Conductivity data are used to determine thermodynamic complex formation constants for cases in which both the initial electrolyte and the complexed electrolyte form ion pairs. Using the method described in the text, the complex formation constants of Li⁺, Na⁺ and K⁺ with the crown ether 18-crown-6 and of Li⁺ with the ligand triphenylphosphine oxide in propylene carbonate have been evaluated from conductance data. The complexation of AgBr in propylene carbonate solutions of n-etrabutylammonium bromide has also been studied by the measurement of molar conductivities. The results of these studies indicate that ion pairing should not be neglected, even in high permittivity solvents such as propylene carbonate, and that the ion pair association constants correlate well with structural studies on cation-crown ether molecular conformations.     

Carbonat-isostere Anionen [SnX3]5− in den Verbindungen Rb6[SnX3]O0,5 und Cs6[SnX3]O0,5 mit X = As,Sb und Bi

Carbonate Isostructural Anions [SnX₃]^5? in the Compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi The metallic shining compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi were prepared from the melt starting from adequate mixtures of the elements and SnO₂. They crystallize in the hexagonal system (space group P6₃/mmc, No. 194, Z = 2) with the lattice constants mentioned in ?Inhaltsübersicht”?. In the structures of the isotypic compounds tin and the main group(V) elements build up trigonal planar anions [SnX₃]^5? with X = As, Sb, and Bi isostructural to the carbonate anion, oxygen forms isolated O^2? ions. The bond lengths Sn? X are significantly shortened with respect to the sums of Pauling covalent radii. The atoms of the units [SnX₃]^5? are coordinated by alkali metal cations forming trigonal prisms and the O^2? anions occupy octahedral holes.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

Small angle neutron scattering studies on nonaqueous dispersions of calcium carbonate Part 2. Determination of the form factor for concentric spheres

Colloidal dispersions of calcium carbonate, stabilised primarily by a surface active agent, in both toluene and dodecane have been examined by small angle neutron scattering. A model has been developed to simulate the scattering behaviour of the particles and is based on the idea of a concentric sphere with a homogeneous layer of adsorbed material surrounding a core particle. Computations based on the model show a wide variation of scattering behaviour with variation of the coherent scattering length of the dispersion medium. These predictions were confirmed by experiment. A method is described for analysis of the experimental data which leads to a determination of the thickness of the adsorbed layer, the radius of the core particle and the standard deviation of core particle radius.     

Kinetic and computational studies on aminolysis of bicyclic carbonates bearing alicyclic structure giving alicyclic hydroxyurethanes

Aminolysis of bicyclic carbonates, which consist of five-membered cyclic carbonate and five- or six-membered alicyclic groups, was examined. Kinetic studies revealed that the aminolysis of the bicyclic carbonate with cyclohexane ring proceeded more smoothly than that of the bicyclic carbonate with cyclopentane ring. Computational calculation suggested that the different reaction rates originate from the distinct ring-strain of the cyclic carbonate groups affected by the conformation of the alicyclic groups.     

非均相羰基氧化合成碳酸二苯酯反应液组分的分析

通过色质联用仪对非均相催化一步合成碳酸二苯酯(DPC)过程中的反应液的主要产物及副产物进行了定性分析，其结果发现该反应的主要副产物为苯氧基丙酸和4-苯氧基苯酚以及四丁基铵盐；用气相色谱外标法对反应液中的DPC进行了定量分析，并通过回归法得到了定量分析：DPC的计算方程式，实验证明该方程在DPC的浓度小于10％范围内比较可靠。     

常压气相氧化羰基化合成碳酸二乙酯

碳酸二乙酯是一种重要的有机化工原料,可广泛用于合成农药如脱叶灵,医药如喹啉酮衍生物,中间体3-氧硫代羧酸酯,还可用于电子管阴极的镀层[1-3]。生产碳酸二乙酯的传统方法为:无水乙醇与光气反应生成氯甲酸乙酯,氯甲酸乙酯继续与乙醇反应生成碳酸二乙酯后经水洗蒸馏制成。使用光气为原料对设备的要求较高。我们在常压下气相羰基化合成碳酸二乙酯[4]:2ＮＯ+Ｃ2Ｈ5ＯＨ+0.5Ｏ2→2Ｃ2Ｈ5ＯＮＯ+Ｈ2Ｏ(1)ＣＯ+2Ｃ2Ｈ5ＯＮＯ→(Ｃ2Ｈ5Ｏ)2ＣＯ+2ＮＯ(2)产生的一氧化氮可与氧气和乙醇进行反应再生为亚硝酸乙酯,符合原子经济反应且几乎不放出对…     

不同碳酸铵试剂对共沉淀法制备的GDC粉性状的影响

近年来工作温度在500￣700℃的中温固体氧化物燃料电池(IT-SOFC)受到广泛关注。稀土掺杂氧化铈尤其是钐、钆掺杂氧化铈在中温下的离子电导率远高于钇掺杂氧化锆(YSZ),是较为理想的IT-SOFC电解质材料。由于掺杂氧化铈难于烧结,不便于制备致密的电解质膜,通过提高掺杂氧化铈粉体细度来降低其烧结温度,是近年来该材料应用领域的一个研究热点。已有各种合成掺杂氧化铈纳米粉的报道,如采用共沉淀法、固态反应法、水热处理法、燃烧法、溶胶-凝胶法等等。其中碳酸盐共沉淀法由于具有成本低、设备简单以及合成粉体细度高等优点而倍受青睐。通…