Influence of redox properties on the activity of iron oxide catalysts in dehydrogenation of propane with CO2

Different Fe-containing catalysts (pure Fe₂O₃, Fe₂O₃ supported on active carbon or g-Al₂O₃, and hydrotalcite derived Mg-Fe oxides) were examined in the dehydrogenation of propane performed in an Ar or CO₂ atmosphere at 873 K. A promoting effect of carbon dioxide was found for the Fe₂O₃ and Fe₂O₃/AC samples. The catalytic results are discussed in terms of redox properties of the catalysts determined by temperature-programmed reduction (TPR). This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and Crystal Structure of Mixed-Ligand Ni(II) Complex of N-(1-Phenyl-3-methyl-4-benzylidene-5-pyrazolone) p-Nitrobezoylhydrazide and Pyridine

A novel mixed-ligand nickel complex, [Ni(PMBP—PNH) (Py)₃], [PMBP—PNH=N-(1-phenyl-3-methyl-4-benzylidene-5-pyrazolone) p-nitrobezoylhydrazide; Py = pyridine], has been synthesized by the hydrothermal method and characterized by elemental analysis, IR spectrum, thermal analysis, and single-crystal X-ray diffraction. The X-ray diffraction reveals that the nickel (II) ion in the title complex is in a slightly distorted octahedral arrangement of the ONO donor atoms of primary ligand PMBP-PNH and three N-donor atoms in the secondary ligand pyridine.     

The first indium-organic two-dimensional layer network with rhombus grids

The indium(III)-organic compound [In(HBtc)₂(4,4′-bpy)](4,4′-Hbpy)(H₂O)_0.5 (Btc=1,3,5-benzenetricarboxylate, 4,4′-bpy=4,4′-bipyridine) has been synthesized under hydrothermal condition and characterized by IR, fluorescent spectroscopy, TGA and single-crystal X-ray diffraction analyses. The compound crystallizes in monoclinic, space group P2(1)/c, a=17.0884(2) Å, b=12.28390(10) Å, c=17.9456(4) Å, β=104.1920(10)°, V=3652.03(10) Å³, Z=4, R₁=0.0572 and wR₂=0.1116 [I>2σ(I)]. All the indium atoms in the compound are hepta-coordinated and link 1,3,5-benzenetricarboxylate forming a 2-D layer structure with rhombus grids.     

Phase transitions and molecular motions in [Cd(H2O)6](BF4)2 studied by DSC, H and F NMR and FT-MIR

Two solid phase transitions of [Cd(H₂O)₆](BF₄)₂ occurring on heating at T_C2=183.3 K and T_C1=325.3 K, with 2 K and 5 K hysteresis, respectively, were detected by differential scanning calorimetry (DSC). High value of entropy changes indicated large orientational disorder of the high temperature and intermediate phase. Nuclear magnetic resonance (¹H NMR and ¹⁹F NMR) relaxation measurements revealed that the phase transitions at T_C1 and T_C2 were associated with a drastic and small change, respectively, of the both spin-lattice relaxation times: T₁(¹H) and T₁(¹⁹F). These relaxation processes were connected with the “tumbling” motions of the [Cd(H₂O)₆]²⁺, reorientational motions of the H₂O ligands, and with the iso- and anisotropic reorientation of the BF₄⁻ anions. The cross-relaxation effect was observed in phase III. The line width and the second moment of the ¹H and ¹⁹F NMR line measurements revealed that the H₂O reorientate in all three phases of the title compound. On heating the onset of the reorientation of 3 H₂O in the [Cd(H₂O)₆]⁺², around the three-fold symmetry axis of these octahedron, causes the isotropic reorientation of the whole cation. The BF₄⁻ reorientate isotropically in the phases I and II, but in the phase III they perform slow reorientation only about three- or two-fold axes. A small distortion in the structure of BF₄⁻ as well as of [Cd(H₂O)₆]²⁺ is postulated. The temperature dependence of the bandwidth of the O-H stretching mode measured by Fourier transform middle infrared spectroscopy (FT-MIR) indicated that the activation energy for the reorientation of the H₂O did not change much at the T_C2 phase transition.     

Flow-injection chemiluminescent determination of metoclopramide hydrochloride in pharmaceutical formulations and biological fluids using the [Ru(dipy)(3)(2+)]-permanganate system

A flow-injection (FI) methodology using (2,2′-dipyridyl) ruthenium(II) [Ru(dipy)₃²⁺] chemiluminescence (CL) was developed for the rapid and sensitive determination of metoclopramide hydrochloride. The method is based on the CL reaction of metoclopramide with Ru(dipy)₃²⁺ and KMnO₄ in a sulfuric acid medium. Under the optimum conditions, a calibration graph was obtained over the concentration range 0.005-3.5 μg ml⁻¹ with a limit of detection (S/N=2) of 1 ng ml⁻¹. The correlation coefficient was 0.99993 (n=8) with a relative standard deviation of 0.48% for 10 determinations of 1 μg ml⁻¹ of drug. The method was successfully applied to the determination of metoclopramide in pharmaceutical preparations and biological fluids after IP administration of 25 mg kg⁻¹ dose to rats. The elimination half-life was 2.5±0.4 h.     

Cd(II) determination in the presence of aqueous micellar solutions

The equilibrium constants and molar absorptivities for the fast formation of a 1:3 complex between cadmium(II) (Cd(II)) and dithizonate anion, in the presence of cationic and non-ionic surfactants, allowed a simple and fast spectrophotometric determination of total cadmium. Indeed, the molar absorptivities of the Cd(II)-dithizone (Dz) complex formed in the presence of the neutral Triton X-100 and cationic cetyltrimethylammonium bromide (CTAB) surfactants are almost twice the value observed in the standard method and the maxima of absorption are shifted by about 40 nm when compared with the standard method. Clearly, the use of neutral and cationic surfactants promotes a higher value of the molar absorptivities of the complex, resulting in an increase in the sensitivity of the method. Application of the method to the desorption of Cd(II) ions from clays is illustrated.     

A novel ion selective membrane potentiometric sensor for direct determination of Fe(III) in the presence of Fe(II)

A new PVC membrane potentiometric sensor that is highly selective to Fe(III) ions was prepared by using 2-[(2-hydroxy-1-propenyl-buta-1,3-dienylimino)-methyl]-4-p-tolylazo-phenol [HPDTP] as a suitable carrier. The electrode exhibits a linear response for iron(III) ions over a wide concentration range (3.5 × 10⁻⁶ to 4.0 × 10⁻²) with a super Nernstian slope of 28.5 (±0.5) per decade. The electrode can be used in the pH range from 4.5 to 6.5. The proposed sensor shows fairly a good discriminating ability towards Fe³⁺ ion in comparison to some hard and soft metals such as Fe²⁺, Cd²⁺, Cu²⁺, Al³⁺ and Ca²⁺. It has a response time of <15 s and can be used for at least 2 months without any measurable divergence in response characteristics. The electrode was used in the direct determination of Fe³⁺ in aqueous samples and as an indicator electrode in potentiometric titration of Fe(III) ions.     

Synthesis and structure of highly substituted pyrazole ligands and their complexes with platinum(II) and palladium(II) metal ions

Reaction of 3-methoxycarbonyl-2-methyl- or 3-dimethoxyphosphoryl-2-methyl-substituted 4-oxo-4H-chromones 1 with N-methylhydrazine resulted in the formation of isomeric, highly substituted pyrazoles 4 (major products) and 5 (minor products). Intramolecular transesterification of 4 and 5 under basic conditions led, respectively, to tricyclic derivatives 7 and 8. The structures of pyrazoles 4a (dimethyl 2-methyl-4-oxo-4H-chromen-3-yl-phosphonate) and 4b (methyl 4-oxo-2-methyl-4H-chromene-3-carboxylate) were confirmed by X-ray crystallography. Pyrazoles 4a and 4b were used as ligands (L) in the formation of ML₂Cl₂ complexes with platinum(II) or palladium(II) metal ions (M). Potassium tetrachloroplatinate(II), used as the metal ion reagent, gave both trans-[Pt(4a)₂Cl₂] and cis-[Pt(4a)₂Cl₂], complexes with ligand 4a, and only cis-[Pt(4b)₂Cl₂] isomer with ligand 4b. Palladium complexes were obtained by the reaction of bis(benzonitrile)dichloropalladium(II) with the test ligands. trans-[Pd(4a)₂Cl₂] and trans-[Pd(4b)₂Cl₂] were the exclusive products of these reactions. The structures of all the complexes were confirmed by IR, ¹H NMR and FAB MS spectral analysis, elemental analysis and Kurnakov tests.     

Mercury(II) mediated cyclisation of R-1-(1′-hydroxyethyl)-2-(1″-propenyl)-3-alkoxy-4-methoxybenzenes to chiral isochromanes

A protocol has been established for the transformation of chiral ortho 1-hydroxyethyl propenyl benzenes under both anaerobic and oxidative mercury(II) mediated conditions to produce chiral isochromanes. Further transformations of the former products yielded chiral isochromanquinones, while the latter afforded the corresponding chiral 4-hydroxyisochromanquinones.     

Cobalt(II) Chloride Complex Formation in Acetamide–Calcium Nitrate Tetrahydrate Melts

The absorption spectra of Co(II) chloride complexes, containing variable concentrations of chloride ligand, in a molten mixture of 80 mol% acetamide–20 mol% calcium nitrate tetrahydrate, were studied at 313, 333, 353, and 363 K, in the wavelength range 400-800 nm. The melt contains three possible ligands (CH₃CONH₂, H₂O, and NO₃ ^-) for competition with added chloride ligand. Addition of chloride caused a shift of the absorption maximum of octahedral cobalt(II) nitrate towards lower energies and pronounced changes in the shape of the initial spectrum of cobalt(II) nitrate. The effect of temperature changes on the molar absorption coefficient of the Co(II) species was dependent on the chloride concentration and was attributed to the structural changes occurring in the cobalt(II) species. The STAR and STAR FA programs were applied to identify the complex ionic species and to calculate the stability constants of Co(II) complexes formed in this solvent. The results indicate the highest probability of formation of the following complex species: Co(NO₃)₄ ^2-, Co(NO₃)₂Cl₂ ^2-, and CoCl₄ ^2-. Stability constants of each complex were presented for the equilibria occurring at 313, 333, 353, and 363 K. Distribution of the Co(II) species was also calculated over the ranges of chloride concentration and temperature investigated.