基于透明陶瓷材料的激光研究进展

陶瓷激光器是一种以透明陶瓷材料作为增益介质的激光器.与单晶相比,透明陶瓷具有制备周期短和烧结温度低等优势,在激活离子高掺杂浓度下能保证良好的光学均匀性,且容易制备成各种大尺寸复合结构.近年在高功率和超短超强激光输出方面得到广泛应用,产生了一系列研究成果.回顾了陶瓷激光器的发展历程,总结了透明陶瓷在高功率、超短超强脉冲激...     

电光晶体补偿位相测量微小位移及其应用

介绍一种应用电光晶体补偿位相测量微小位移的方法,着重分析其测量精度,并应用这种方法校正压电陶瓷的线性,精度优于1%波长。     

Small-scale fracture toughness of ceramic thin films: the effects of specimen geometry,ion beam notching and high temperature on chromium nitride toughness evaluation

For the implementation of thin ceramic hard coatings into intensive application environments, the fracture toughness is a particularly important material design parameter. Characterisation of the fracture toughness of small-scale specimens has been a topic of great debate, due to size effects, plasticity, residual stress effects and the influence of ion penetration from the sample fabrication process. In this work, several different small-scale fracture toughness geometries (single-beam cantilever, double-beam cantilever and micro-pillar splitting) were compared, fabricated from a thin physical vapour-deposited ceramic film using a focused ion beam source, and then the effect of the gallium-milled notch on mode I toughness quantification investigated. It was found that notching using a focused gallium source influences small-scale toughness measurements and can lead to an overestimation of the fracture toughness values for chromium nitride (CrN) thin films. The effects of gallium ion irradiation were further studied by performing the first small-scale high-temperature toughness measurements within the scanning electron microscope, with the consequence that annealing at high temperatures allows for diffusion of the gallium to grain boundaries promoting embrittlement in small-scale CrN samples. This work highlights the sensitivity of some materials to gallium ion penetration effects, and the profound effect that it can have on fracture toughness evaluation.     

Ce∶YAG透明陶瓷的制备及性能研究

以高纯Al_2O_3、Y_2O_3和CeO_2为原料,采用固相法制备Ce∶YAG(掺铈钇铝石榴石)透明陶瓷,研究了稀土离子掺杂浓度以及烧结温度对陶瓷样品光学性能的影响。结果表明:陶瓷片透过率随着烧结温度的升高而增大,1750℃烧结获得的0.5%Ce∶YAG陶瓷片的透过率高达81.7%。Ce∶YAG陶瓷片的激发峰和发射峰分别位于350nm和530nm处,在白光LED领域具有极大的应用价值。     

Testifying experiment of the multi-pulse phenomena of capillary discharge soft-X-ray laser

In a capillary discharge experiment for the neon-like argon lasing, we have proposed an experimental scheme to verify that the multi-spike of X-ray diode (XRD) signal is a multi-pulse laser or is a reflection of the laser pulse in the XRD.The ceramic capillary has an inner diameter of 3mm and a length of 200mm.At the gas pressure of 28Pa and discharge current of 27kA, stable lasing has been realized.The experimental results prove that the multi-spike of XRD signal is a reflection of the electromagnetic signal produced by the laser pulse in the XRD.The improved electrocircuit scheme of the XRD to minimize the reflection phenomena is also found.     

The transient suppression for piezoelectric ceramic emission transducer

A transient suppression method for piezoelectric ceramic transducer is presented. By adding some special pedestal pulses to the original transmitted signal, the transient effects in the output of the transducer can be just precisely transmission by use of a narrowband transducer. canceled, thereby achieving the broadband The experimental results show that the transient responses of the sinusoid pulses and coded signals are suppressed successfully and the acoustic waveforms radiated into the surrounding water are improved significantly.     

HCCB-DEMO氦冷固态包层热工水力计算及分析

根据这几年HCCB-DEMO包层技术的发展,对原氦冷固态氚增殖包层进行相应设计改进。利用三维有限元软件CFX对该改进设计进行了热工水力学计算及分析。分析模型包括：第一壁,增殖单元,筋板以及三者集成模型。结果表明：各子部件在单独分析的情况下,材料最高温度低于设计要求限值;冷却剂进出口温度为300/500°C,满足设计需求。同时对比分析了集成计算及单独计算的结果,得出第一壁与铍球床之间的相互热作用较大,铍球床材料最大温度会高于设计限值。针对经集成计算后发现的问题,未来将对氦冷固态包层的设计进行进一步的优化。     

Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators

Based on Timoshenko beam model, a theoretical model of radially polarized piezoelectric ceramic tubes is investigated. In the model, the piezoelectric effects are considered, and the shear correction factor is introduced which reveals effects of the size of the cross-section and Poisson’s ratio. Based on the model, the particular attentions are devoted to effects of the boundary conditions at two ends on flexural resonance frequencies of the piezoelectric ceramic tubes. Changing the sizes of the tubes and the mass loads at both free ends, the variations of the flexural resonance frequencies of free–free piezoelectric ceramic tubes are calculated theoretically. Besides, the flexural resonance frequencies of the piezoelectric ceramic tube cantilevers with mass loads at one free end are also investigated theoretically. To verify accuracy of the theoretical mode, the flexural resonance frequencies for different lengths of the piezoelectric ceramic tubes and different loaded masses are measured experimentally. The theoretical results agree well with the experimental measurement, which demonstrates that the model is accurate for analyzing the flexural resonance frequencies of the piezoelectric ceramic tubes with mass loads.     

High-power high-stability Q-switched green laser with intracavity frequency doubling of diode-pumped composite ceramic Nd:YAG laser

We successfully obtain high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd:YAG in a straight plano-concave cavity. The temperature distribution in composite ceramic Nd:YAG crystal is numerically analyzed and compared with that of conventional Nd:YAG crystal. By use of a composite ceramic Nd:YAG rod and a type-II high gray track resistance KTP (HGTR-KTP) crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd:YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.     

A density-functional theory investigation on desorption of O2 on Sn（111） and its comparison with initial oxidation on the X（111） （X=Si,Ge, Sn,Pb） surfaces

<正>The first-principles calculations are performed to investigate the adsorption of O₂ molecules on an Sn（111） 2×2 surface.The chemisorbed adsorption precursor states for O₂ are identified to be along the parallel and vertical channels, and the surface reconstructions of Sn（lll） induced by oxygen adsorption are studied.Based on this,the adsorption behaviours of O₂ on X（111）（X=Si,Ge,Sn,Pb） surfaces are analysed,and the most stable adsorption channels of O₂ on X（111）（X=Si,Ge,Sn,Pb） are identified.The surface reconstructions and electron distributions along the most stable adsorption channels are discussed and compared.The results show that the O₂ adsorption ability declines gradually and the amount of charge transferred decreases with the enhancement of metallicity.