Polyimidazolyl acetate ionic liquid grafted on cellulose filter paper as thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water

Recently, pharmaceuticals and personal care products in the water environment exhibited potential risks to both human and aquatic organisms. In order to improve the sensitivity and accuracy of pharmaceutical detection, the polyimidazolyl acetate ionic liquid was synthesized by Radziszewski reaction and coated on cellulose filter papers as a thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water. The attenuated total reflection-infrared spectrometry, thermogravimetric analysis, and scanning electron microscope analyses demonstrated that the polyimidazolyl acetate ionic liquid was successfully prepared and attached to the surface of the cellulose filter paper through chemical bonding. The adsorption capacity of the homemade thin-film extraction material for the four non-steroidal anti-inflammatory drugs was greater than 8898 ng/cm² under the optimum conditions, and the desorption rate was over 90%. Then, a paper-based thin-film extraction phase-high-performance liquid chromatography-tandem mass spectrometry method was established for the extraction of non-steroidal anti-inflammatory drugs in water. This method provided limits of detection and limits of quantification were in the range of 0.02–0.15 and 0.17–0.50 μg/L, respectively. Hence, the obtained thin-film extraction phase showed excellent recovery and reproducibility for the target non-steroidal anti-inflammatory drugs with carboxyl groups from water.     

Fabrication of bacterial cellulose thin films self-assembled from sonochemically prepared nanofibrils and its characterization

Bacterial cellulose (BC) film formation could be a critical issue in nanotechnology applications such as biomedical or smart materials products. In this research, purified pretreated BC was subjected to high intensity ultrasound (HIUS) and was investigated for the development of BC films. The morphological, structural and thermal properties of the obtained films were studied by using FE-SEM, AFM, FT-IR, XRD, TGA and DSC characterizations. Results showed that the most favorable purification treatment was the 0.01 M NaOH at 70 °C for 2 h under continuous stirring. The most suitable ultrasound operating conditions were found to be, 1 cm distance of ultrasonic probe from the bottom of the beaker, submerged in cold water bath cooling around 12 ± 2 °C. The power (25 W/cm²), time (30 min), BC concentration (0.1% w/w), amplitude (20 μm) and frequency (20 kHz) were maintained constant.     

Fabrication and invitro evaluation of electrospun gum ghatti-polyvinyl alcohol polymeric blend green nanofibre mat (GG-PVA NFM) as a novel material for polymeric scaffolds in wound healing

The present research is mainly based on the fabrication of biodegradable nanofiber mats (NFM) through the process of electrospinning using a novel combination of Gum Ghatti (GG) and Poly vinyl alcohol (PVA). The prepared NFM was crosslinked (CL-1) using Glutaraldeyde-HCl vapours and was characterized for its tensile strength along other analytical characterizations using FTIR, TGA, DSC and XRD. The mechanical strength of the NFM was found to be sufficiently high than in comparison to noncrosslinked sample and PVA NFM. The internal architecture of the CL-1 by use of atomic force microscopy (AFM) revealed that there was very well formed crosslinks suitable for drug loading as well as cell proliferation. The wound healing properties of the CL-1 in mice animal model indicated the healing within 5 days as compared to the control wound. Moreover, the sample was also analysed for its ability as polymeric scaffold and no toxicity was found onto the locally applied tissue on histological investigations.     

Affinity foam fractionation of Trichoderma cellulase

Cellulase could not be selectively collected from fermentation broth by simple foam fractionation, because of the presence of other more surface-active compounds. A new approach of affinity foam fractionation was investigated for improvement. A hardwood hydrolysate (containing cellulose oligomers, substrates to cellulase) and two substrate analogs, i.e., carboxymethyl cellulose (CMC) and xylan hydrolysate, were added before the foaming process. The substrates and substrate analogs were indeed found to bind the cellulase selectively and form more hydrophobic complexes that partition more readily onto bubble surfaces. In this study, the effects of the type and concentration of substrate/analog as well as the presence of cells at different growth stages were examined. The foam fractionation properties evaluated included foaming speed, foam stability, foamate volume, and enrichment of filter paper unit (FPU) and individual cellulase components (i.e., endoglucanases, exoglucanases, and β-glucosidases). Depending on the broth and substrate/analog employed, the foamate FPU could be more than fourfold higher than the starting broth FPU. Addition of substrate/analog also deterred the enrichment of other extracellular proteins, resulting in the desired cellulase purification in the foamate. The value of E/P (enzyme activity-FPU/g/L of proteins) in the foamate reached as high as 18, from a lactose-based fermentation broth with original E/P of 5.6. Among cellulase components, exoglucanases were enriched the most and β-glucosidases the least. The study with CMC of different molecular weights (MW) and degrees of substitution (DS) indicated that the CMC with low DS and high MW performed better in cellulase foam fractionation.     

纤维素溶剂研究进展

概述了纤维素溶剂的重要研究进展,主要包括N-甲基吗啉-N-氧化物(NMMO)在85℃以上高温可破坏纤维素分子间氢键,导致溶解;氯化锂/二甲基乙酰胺(LiCl/DMAc)在100℃以上可溶解纤维素;1-丁基-3-甲基咪唑盐酸盐([BMIM]Cl)和1-烯丙基-3-甲基咪唑盐酸盐([AMIM]Cl)离子液体,含强氢键受体Cl-离子,通过它们与纤维素羟基作用而引起溶解.氨基甲酸酯体系则是通过尿素与纤维素在100℃以上反应转变为纤维素氨基甲酸酯,然后再溶解于NaOH水溶液中;氢氧化钠/水体系,只能溶解结晶度和聚合度较低的纤维素;NaOH/尿素、NaOH/硫脲和LiOH/尿素水溶液体系,它们预冷至-5~-12℃后可迅速溶解纤维素.主要是通过低温产生小分子和大分子间新的氢键网络结构,导致纤维素分子内和分子间氢键的破坏而溶解,同时尿素或者硫脲作为包合物客体阻止纤维素分子自聚集使纤维素溶液较稳定.低温溶解技术不仅突破了加热溶解的传统方法,而且可推进化学"绿色化"进程.共引用参考文献50篇.     

Synthesis of Polyanionic Cellulose Carbamates by Homogeneous Aminolysis in an Ionic Liquid/DMF Medium

Polyanionic cellulose carbamates were synthesized by rapid and efficient homogeneous aminolysis of cellulose carbonate half-esters in an ionic liquid/DMF medium. Cellulose bis-2,3-O-(3,5-dimethylphenyl carbamate), as a model compound, reacted with different chloroformates to cellulose carbonates. These intermediates were subjected to aminolysis, for which both the reactivity of different chloroformates towards C6-OH and the reactivity/suitability of the respective carbonate half-ester in the aminolysis were comprehensively studied. Phenyl chloroformate and 4-chlorophenyl chloroformate readily reacted with C6-OH of the model cellulose derivative, while 4-nitrophenyl chloroformate did not. The intermediate 4-chlorophenyl carbonate derivative with the highest DS (1.05) was then used to evaluate different aminolysis pathways, applying three different amines (propargyl amine, β-alanine, and taurine) as reactants. The latter two zwitterionic compounds are only sparingly soluble in pure DMF as the typical reaction medium for aminolysis; therefore, several alternative procedures were suggested, carefully evaluated, and critically compared. Solubility problems with β-alanine and taurine were overcome by the binary solvent system DMF/[EMIM]OAc (1:1, v/v), which was shown to be a promising medium for rapid and efficient homogeneous aminolysis and for the preparation of the corresponding cellulose carbamate derivatives or other compounds that are not accessible by conventional isocyanate chemistry. The zwitterionic cellulose carbamate derivatives presented in this work could be promising chiral cation exchangers for HPLC enantiomer separations.     

Saprophytic Bacillus Accelerates the Release of Effective Components in Agarwood by Degrading Cellulose

The value of Agarwood increases with time due to the gradual release of its major components, but the mechanism behind this remains unclear. Herein we reveal that the potential driving force of this process is the degradation of cellulose in Agarwood by its saprophytic Bacillus subtilis. We selected 10-year-old Agarwood from different places and then isolated the saprophytic bacteria. We confirmed these bacteria from different sources are all Bacillus and confirmed they can degrade cellulose, and the highest cellulase activity reached 0.22 U/mL. By co-cultivation of the bacterium and Agarwood powder, we found that three of the strains could release the effective components of Agarwood, while they had little effect in increasing the same components in living Aquilaria sinensis. Finally, we demonstrated that these saprophytic Bacillus subtilis have similar effects on Zanthoxylum bungeanum Maxim and Dalbergiaod orifera T. Chen, but not on Illicium verum Hook. f, Cinnamomum cassia Presl and Phellodendron chinense Schneid. In conclusion, our experiment revealed that the saprophytic Bacillus release the effective components of Agarwood by degrading cellulose, and we provide a promising way to accelerate this process by using this bacterial agent.     

纤维素热解过程中活性纤维素的生成研究

热重分析发现活性纤维素的生成始于530 K左右,对应于失重图上的肩部及SDTA曲线中强烈的放热峰.在辐射加热闪速热裂解试验台上获取了一种可溶于水、高温下易分解、室温下呈固态且稳定存在的黄色中间产物.扫描电镜图片证明在热裂解初期纤维素经历了一个熔化和相互粘结的状态,产物的红外谱图证实了大量的羰基和羧基官能团的生成.高效液相色谱分析证明其主要成分是一系列聚合度不同的低聚糖,推断该低聚糖即为活性纤维素.