X-ray photoelectron spectroscopy and Raman microscopy of a ferroan platinum crystal from the Kondyor Massif,Russian Far East

X-ray Photoelectron Spectroscopy was used to study a ferroan platinum crystal from the Kondyor Massif, Russian Far East. Prior to the X-ray Photoelectron Spectroscopic analyses, the nature of the crystal was confirmed by X-ray diffraction. The survey scan showed mainly the presence of Pt and Fe, with smaller amounts of O and Si. The high resolutions spectra of the Pt 4f and Fe 2p showed 18.3 atom% Fe in the crystal, which puts the composition on the lower boundary for ferroan platinum and confirms earlier analyses using other methods such as Scanning Electron Microscopy-Energy Dispersive X-ray analysis/microprobe. The binding energy of the Pt 4f5/2 was 74.0?eV and Pt 4f7/2 70.5?eV, while the Fe 2p3/2 for metallic Fe was observed at 707.2?eV. The Fe 2p3/2 for metallic Fe was significantly sharper than that of Fe 2p3/2 at 710.7?eV associated with surface material. The Raman spectrum was dominated by the Pt–Pt stretching mode at 253?cm^?1. Changed orientation resulted in the observation of two bands at 127 and 139?cm^?1, interpreted as being due to stretching modes of two Pt–Pt bonds with the third bond to Fe and Pt fixed. The presence of Ca-Fe-Al-Mg-Si-O on the surface was probably associated with the presence of a clinopyroxene. These minerals can be expected since the crystal came originally from a clinopyroxenite-dunite matrix. The spectra showed a variety of interferences, e.g. Al 2p with Pt 4f, Mg 2p with Fe 3p, and Ca 2p1/2 with Mg Auger, making exact determinations of the ratios of these elements difficult.     

Improved Interfacial Bonding Strength and Reliability of Functionalized Graphene Oxide for Cement Reinforcement Applications

Poor bonding strength between nanomaterials and cement composites inevitably lead to the failure of reinforcement. Herein, a novel functionalization method for the fabrication of functionalized graphene oxide (FGO), which is capable of forming highly reliable covalent bonds with cement hydration products, and therefore, suitable for use as an efficient reinforcing agent for cement composites, is discussed. The bonding strength between cement and aggregates was improved more than 21 times with the reinforcement of FGO. The fabricated FGO also demonstrated many important features, including high reliability in cement pastes, good dispersibility, and efficient structural refinement of cement hydration products. With the incorporation of FGO, cement mortar samples demonstrated up to 40 % increased early and ultimate strength. Such results make the fast demolding and manufacture of light constructions become highly possible, and show strong advantages on improving productivity, saving cost, and reducing CO₂ emissions in practical applications.     

Microstructural evolution of AZ31 magnesium alloy subjected to sliding friction treatment

Microstructural evolution and grain refinement mechanism in AZ31 magnesium alloy subjected to sliding friction treatment were investigated by means of transmission electron microscopy. The process of grain refinement was found to involve the following stages: (I) coarse grains were divided into fine twin plates through mechanical twinning; then the twin plates were transformed to lamellae with the accumulation of residual dislocations at the twin boundaries; (II) the lamellae were separated into subgrains with increasing grain boundary misorientation and evolution of high angle boundaries into random boundaries by continuous dynamic recrystallisation (cDRX); (III) the formation of nanograins. The mechanisms for the final stage, the formation of nanograins, can be classified into three types: (i) cDRX; (ii) discontinuous dynamic recrystallisation (dDRX); (iii) a combined mechanism of prior shear-band and subsequent dDRX. Stored strain energy plays an important role in determining deformation mechanisms during plastic deformation.     

Dithienoindophenines: p‐Type Semiconductors Designed by Quinoid Stabilization for Solar‐Cell Applications

Compared with the dominant aromatic conjugated materials, photovoltaic applications of their quinoidal counterparts featuring rigid and planar molecular structures have long been unexplored despite their narrow optical bandgaps, large absorption coefficients, and excellent charge‐transport properties. The design and synthesis of dithienoindophenine derivatives (DTIPs) by stabilizing the quinoidal resonance of the parent indophenine framework is reported here. Compared with the ambipolar indophenine derivatives, DTIPs with the fixed molecular configuration are found to be p‐type semiconductors exhibiting excellent unipolar hole mobilities up to 0.22 cm² V^?1 s^?1, which is one order of magnitude higher than that of the parent IP‐O and is even comparable to that of QQT(CN)4‐based single‐crystal field‐effect transistors (FET). DTIPs exhibit better photovoltaic performance than their aromatic bithieno[3,4‐b]thiophene (BTT) counterparts with an optimal power‐conversion efficiency (PCE) of 4.07 %.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

Regulation of shear stress on rolling behaviors of HL-60 cells on P-selectin

Circulating leukocytes in trafficking to the inflammatory sites, will be first tether to, and then roll on the vascular surface. This event is mediated through specific interaction of P-selectin and P-selectin glycoprotein ligand-1(PSGL-1), and regulated by hemodynamics. Poor data were reported in understanding P-selectin-mediated rolling. With the flow chamber technique, we herein observed HL-60 cell rolling on P-selectin with or without 3% Ficoll at various wall shear stresses from 0.05 to 0.4 dyn/cm2. The results demonstrated that force rather than transport regulated the rolling, similar to rolling on L- and E-selectin. The rolling was accelerated quickly by an increasing force below the optimal shear threshold of 0.15 dyn/cm2 first and then followed by a slowly decelerating phase starting at the optimum, showing a catch-slip transition and serving as a mechanism for the rolling. The catch-slip transition was completely reflected to the tether lifetime and other rolling parameters, such as the mean and fractional stop time. The narrow catch bond regime stabilized the rolling quickly, through steeply increasing fractional stop time to a plateau of about 0.85. Data presented here suggest that the low shear stress threshold serves as a mechanism for most cell rolling events through P-selectin.     

No optimal 1‐planar graph triangulates any nonorientable closed surface

Suzuki [Discrete Math. 310 (2010), 6–11] proved that for any orientable closed surface F² other than the sphere, there exists an optimal 1‐planar graph which can be embedded on F² as a triangulation. However, for nonorientable closed surfaces, the existence of such graphs is unknown. In this article, we prove that no optimal 1‐planar graph triangulates a nonorientable closed surface.     

Vesicle formation in aqueous mixture of the cetyltrimetylammonium bromide and an anionic chitosan derivative

The present work aimed at research the physic-chemical properties of the interaction of N-decyl-O-chitosan sulfate (an amphiphilic chitosan derivative, C₁₀-OCHS) with cetyltrimetylammonium bromide (CTAB) by the steady-state fluorescent, static/dynamic surface tension, turbidity and transmission electron microscopy (TEM). The results showed that the complex of C₁₀-OCHS/CTAB had high surface activity and lower critical aggregation concentration. Besides, the C₁₀-OCHS/CTAB could self-assemble into various aggregates like irregular spherical aggregates, vesicles or polydisperse aggregates from lower to higher concentrations of CTAB with a mixed C₁₀-OCHS concentration of 200?mg/L.