铁铈复合氧化物催化剂SCR脱硝的改性研究

利用共沉淀法制备了铁铈催化剂,考察添加钛、锆、钨和钼对其SCR脱硝的改性规律。结果表明,钨和钼的添加提高了铁铈催化剂高温脱硝性能,却使其低温活性有所降低;钛的添加对铁铈催化剂脱硝性能具有促进作用,尤其提高了其低温活性,并拓宽了其完全转化温度窗口,为最佳改性物。当钛的物质的量比逐渐由0.10增至0.40,铁铈钛催化剂低温脱硝效率先增大后减小,但其高温脱硝效率逐渐增大至100%,钛的最佳物质的量比为0.15。XRD和N₂吸附分析结果表明,钛能优化铁铈催化剂的孔隙结构,增大其比表面积和比孔容,细化其孔径,并与催化剂中铁、铈氧化物形成良好的固溶体,从而提高了铁铈催化剂的SCR脱硝性能。Fe_0.8Ce_0.05Ti_0.15O_z催化剂在150～400℃取得了高于90%的NO_x转化率。     

有机溶剂/缓冲液两相体系中全细胞催化拆分环氧氯丙烷

研究了有机溶剂/缓冲液两相体系中重组大肠杆菌E.coli BL21 (DE3)全细胞水解动力学拆分外消旋环氧氯丙烷制备(R)-环氧氯丙烷的过程.结果表明,最适反应条件为:最适有机溶剂异辛烷与缓冲液的体积比7:3,最适缓冲液pH 8.0,底物浓度574mmol/L,全细胞加入量0.07g湿菌体/ml溶液,温度30℃.在此条件下于1L反应器中反应45min,(R)-环氧氯丙烷的摩尔产率、光学纯度和时空产率分别达到37.5%,99.3%ee和0.286mol/(L·h).与单一水相体系相比,异辛烷/缓冲液两相体系中底物浓度和(R)-环氧氯丙烷时空产率分别提高了55.2%和98.6%.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Plasmonic resonance instigated enhanced photoluminescence in quantum dot dispersed nematic liquid crystal

In the present investigation, the optical property of the nematic sample p-methoxybenzylidene p-decylaniline, dispersed with SiO₂ quantum dot (QD), has been reported. Enhanced luminescence has been observed from nematic-QD composites. Surface plasmonic effect along with QD exciton has been highlighted to discuss the observed intensification in photoluminescence. The intensified photoemission from the nematic composites can also be inferred from improved orientational behaviour of the liquid crystal molecules due to dispersion of QDs. Variation in the intensity of photoabsorption can be harnessed for development of luminescent display devices and optical parameter-driven scientific applications.     

The optimal cell gap determination of a liquid crystal wavefront corrector from a single photoelectric measurement

It has been a crucial technique to improve the dynamic response characteristics of a liquid crystal wavefront corrector (LCWFC) with optimal cell gap since the LCWFC needs at least 2π (or π) phase modulation in adaptive optics systems (AOSs). We have given a complete process for obtaining the optimal cell gap accurately from a single photoelectric measurement, which can be conducted with a liquid crystal (LC) cell of any known thickness. This method has been analysed theoretically and confirmed experimentally by using a wedge-shaped cell; the experimental results match very well with the theoretical analysis. The response time of an optimal gap cell can be a novel evaluation method of response performance of LC materials.     

Transportation of a microdroplet on an oriented liquid crystal surface

Wetting phenomena play important roles in several technological applications and in many physical and biological thin‐film phenomena, such as wetting, adhesion and friction. One of key issues of these studies is to control the surface energy (or wettability) dynamically for liquid transportation. We have developed a liquid crystal (LC) surface for use as a transport substrate since we expected that the surface energy of an LC surface can be controlled rapidly using an electric field. The rapid control of the polarisability (or wettability) of a liquid crystalline surface by an electric field has been demonstrated, together with the transportation of a liquid microdroplet.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

X-ray characterisation of local molecular orientation in the electroclinic effect of surface-stabilised SmA liquid crystals

The local molecular orientation in the electroclinic effect of the chiral smectic A phase in a surface-stabilised cell has been determined using a time-resolved synchrotron X-ray microbeam diffraction technique. Space- and time-resolved X-ray wide-angle halo scattering under an electric field reveals the static and dynamic intralayer molecular orientation. The molecular orientation varies spatially in accordance with the stripe texture and is dependent on the applied voltage. It has been found that the deviation of the molecular orientation from the rubbing direction depends strongly on the sample history. The relation between the apparent molecular orientation and the layer structure is discussed.     

Determination of Some Transition Metals by Atomic Absorption Spectroscopy after Extraction with Pyridine-2-aldehyde-2-quinolylhydrazone

The extraction of pyridine-2-aldehyde-2-quinolylhydrazone chelates of cadmium, cobalt, copper, nickel, and zinc into isoamyl alcohol (IAOL) and methylisobutyl ketone (MIBK) has been investigated as a basis for the determination of these metals. Below pH 6 the extraction is enhanced by the addition of perchlorate, suggesting that charged complexes are being extracted by ion-pair formation. Sensitivities (1% absorption) are reported for IAOL and MIBK solutions of the metals sprayed into an air-acetylene flame. A procedure for the determination of the above metals by atomic absorption spectroscopy after extraction is given. The procedure is applied to the analysis of tap water for cadmium, copper, and zinc.     

Environmental Determination of Alkylphenol Polyethoxylate Refractory Residues Using Mass Spectrometric Techniques

Abstract

The use of methane chemical ionisation GC/MS gave satisfactory results when applied to environmental analysis of halogenated octylphenol polyethoxylates residues. In addition the selected ion monitoring GC/MS technique has been successfully applied for simulataneous qualitative and quantitative determination of some refractory metabolites of nonylphenol polyethoxylates in secondary sewage effluent and surface waters.