反应性梳状聚乙二醇改性聚酯薄膜表面及其内皮细胞相容性的研究

以高密度梳状PEG(CPEG)作为表面改性材料, 将PEG末端羟基转化为醛基, 将梳状PEG和线形PEG固定在氨基化的PET膜表面, 并利用表面的反应性醛基进一步固定了氨基酸和整合素配体多肽片段RGD多肽. 红外光谱、 接触角和X射线光电子能谱(XPS)测定结果表明, 该法可有效地固定氨基酸和多肽, 获得模拟细胞膜中多糖-蛋白质复合物结构的特异性功能表面. 对两种不同结构的PEG细胞培养实验结果表明, CPEG比线形PEG(LPEG)具有更好的抗非特异粘附性. 此外, CPEG比LPEG具有更多的活性反应基团, 用PEG末端活性的醛基固定整合素配体多肽片段RGD, 可有效地诱导材料表面的内皮细胞化, 改善材料的细胞相容性.     

PEMFC催化剂的研究：自制抗CO中毒Pt-Ru/C电催化剂的性质

用胶体法制备了抗CO中毒PEMFC阳极Pt-Ru/C电催化剂（标记为THYT－2）,对 比研究了THYT－2与Johnson Matthey (JM)公司同类品牌Pt-Ru/C催化剂的电化学及 其它物理化学性能。结果表明,THYT－2电催化剂在甲醇燃料电池和CO／H_2（Φ_ (CO) = 1 * 10~(-4)）的氢氧燃料电池中的电催化行为与JM催化剂相当,但THYT－ 2在低浓度CO氢气燃料中的电池性能更好。两种催化剂的其它物理化学性质具有类 似性：XPS分析结果表明THYT－2和JM催化剂 中都有三种不同价态的Pt存在：即金 属态Pt(0)、氧化态Pt(II)和Pt(IV)。HRTEM测试结果表明两种催化剂的粒径处在2 ～3 mn左右,这可能是它们拥有良好电化学性能的主要原因之一。本文还对催化剂 中Pt与Ru组分的分布和相互作用进行了讨论,提出了改进Pt-Ru/C电催化剂的思路 。     

Mg／Mgl．8La0．2Ni纳米复合材料的吸放氢性能研究

应用高能球磨法制备Mg-x％Mg1.8La0.2Ni（x=10、20和30）纳米复合储氢材料．X射线衍射（XRD）、透射电镜（TEM）和选区电子衍射（SAED）测试表明，该复合材料具有纳米晶和非晶态混合结构的性质，吸氢温度降低，较好的吸放氢动力学性能，在423K，2．5MPa氢压的条件下，50s内即可达到最大吸氢量．     

枸杞多糖对白血病细胞作用热化学特征研究

用微量热法研究了枸杞多糖对小鼠白血病细胞L1210代谢作用的热化学特征。结果表明，枸杞多糖对L1210细胞代谢有明显的抑制作用，为枸杞在防治肿瘤中的应用提供了可靠的信息。     

Investigation of the electrocatalytic oxidation of formate and ethanol at platinum black under microbial fuel cell conditions

In this communication, we discuss the electro-oxidation of the fermentation products formate and ethanol at platinum black modified electrodes under microbial fuel cell conditions, i.e., at neutral pH, room temperature, and in microbial culture solutions. The electrocatalytic oxidation was studied using cyclic voltammetry, chronoamperometry, and potentiostatic coulometry. Current densities up to 6 mA cm⁻² at 0.2 V oxidation potential and 97% coulombic efficiency were observed for the electro-oxidation of 100 mM solutions of formate in pH 7 buffer solution. Electrode deactivation could be successfully prevented using an oxidative potential reactivation procedure. Polymer coating, however, fully stopped the formate oxidation. As expected, the electro-oxidation of ethanol was less efficient—with a limiting current density being 600 μA cm⁻².Dedicated to Professor Dr. Alan M. Bond on the occasion of this 60th birthday.     

Analysis of serotonin release from single neuron soma using capillary electrophoresis and laser-induced fluorescence with a pulsed deep-UV NeCu laser

The use of capillary electrophoresis (CE) with laser-induced fluorescence excited by ultraviolet (UV) lasers in the range 200–300 nm has been restricted by the available wavelengths and expense of UV lasers. The integration of a NeCu deep UV laser operating at 248.6 nm with a single channel CE system with post-column sheath flow detection allows detection limits for serotonin and tryptophan of 3.9×10^-8 M and 4.5×10^-8 M respectively. Single cell analysis of serotonergic metacerebral cells from the sea slug Aplysia californica yields a value of 800±85 fmol of serotonin in each cell soma. For the first time, serotonin is directly detected in electrically stimulated release from single metacerebral cell soma, with approximately 4% of the serotonin contained in the soma released from a semi-intact preparation with a 2 min electrical stimulation.     

The dependence of sorbent/analyte type on observed differences in supercritical fluid extraction efficiencies employing extraction vessels of different dimensions

Summary The effect of extraction cell dimensions (i.d.: length) on supercritical fluid extraction (SFE) efficiencies of polychlorinated biphenyls (PCBs) is shown to be dependent on the type of sorbent used. For octadecylsilane (C18) sorbents, there is a significant increase in observed SFE recoveries of PCBs when the cell dimensions are made more broad (increased i.d.: length); whereas, no effect of cell geometry is observed when the common adsorbent, Florisil, is utilized. Additionally, recoveries decreased in proportion to the chlorine number, for the PCBs studied, for octadecylsilane sorbents, while no such effect was observed for Florisil. These results illustrate the magnitude of the matrix effect in SFE, which generally dominated observed recoveries, even in the simplest analyte/sorbent systems such as the one studied here.     

Small-volume radial flow cell for all-solid-state ion-selective electrodes

A flow cell with a radial distribution of four all-solid-state ion selective electrodes (ISEs), or alternatively three ISEs and one reference electrode, was designed and optimized for mass production. The radial distribution of the electrodes reduces the cell volume and is expected to minimize cross-contamination between different electrodes. Two different cell prototypes were developed and tested for all-solid-state K⁺-ISEs based on a solvent polymeric ion-selective membrane (ISM) and a conducting polymer, poly(3,4-ethylenedioxythiophene), as solid internal contact. In the first prototype, PEDOT was electropolymerized from an aqueous solution of the monomer and the doping ion salt, sodium polystyrenesulfonate (NaPSS). The second prototype employed an aqueous dispersion of PEDOT(PSS) that is commercially available (Baytron P, Bayer AG). Compared to electrochemical synthesis, solution casting of the polymer dispersion was found to be a more advantageous method to deposit the conducting polymer layer aiming at mass production. The resulting prototypes of the flow cell had a small volume (ca. 17-37 μl), which makes them suitable for application in clinical analysis.     

1-烷（苯）氧基-3-（3，4-亚甲基二氧）苯基-2-丙醇的合成与生物活性研究

黄樟素氧化物与烷氧基钠和苯氧基钠反应，区域选择性地开环加成，生成1-烷 （苯）氧基-3-（3，4-亚甲基二氧）苯基-2-丙醇。该系列化合物具有诱导细胞凋 亡与分化的生物活性。     

Thermodynamic properties of the gaseous barium silicates BaSiO2 and BaSiO3

In the present study, the stability of gaseous barium silicates was confirmed by the high temperature mass spectrometry. On the basis of equilibrium constants measured for gas-phase reactions, the standard formation enthalpies were determined for gaseous barium silicates as (−510 ± 15) kJ · mol⁻¹ and (−884 ± 18) kJ · mol⁻¹ at 298 K; standard atomization enthalpies as (1637 ± 17) kJ · mol⁻¹ and (2318 ± 20) kJ · mol⁻¹ at 298 K for BaSiO₂ and BaSiO₃, respectively. Based on the results obtained the critical analysis of the literature data was carried out.