CSE-MECC two-dimensional capillary electrophoresis analysis of proteins in the mouse tumor cell (AtT-20) homogenate

Two-dimensional capillary electrophoresis was used for the separation of proteins and biogenic amines from the mouse AtT-20 cell line. The first-dimension capillary contained a TRIS–CHES–SDS–dextran buffer to perform capillary sieving electrophoresis, which is based on molecular weight of proteins. The second-dimension capillary contained a TRIS–CHES–SDS buffer for micellar electrokinetic capillary chromatography. After a 61-s preliminary separation, fractions from the first-dimension capillary were successively transferred to the second-dimension capillary, where they further separated by MECC. The two-dimensional separation required 60 min.     

New Amphiphilic Polypyridyl Ruthenium（Ⅱ） Sensitizer and Its Application in Dye-Sensitized Solar Cells

Amphiphilic polypyridyl mthenium（Ⅱ） complex cis-di（isothiocyanato）（4,4＇-di-tert-butyl-2,2＇-bipyridyl）（4,4＇- dicarboxy-2,2＇-bipyridyl）ruthenium（Ⅱ）（K005） has been synthesized and characterized by cyclic voltammetry, ^1H NMR, UV-Vis, and FT-IR spectroscopies. The sensitizer sensitizes TiO2 over a notably broad spectral range due to its intense metal-to-ligand charge-transfer （MLCT） bands at 537 and 418 nm. The photophysical and photochemical studies of K005 were contrasted with those of cis-Ru（dcbpy）2（NCS）2, known as the N3 dye, and the amphiphilic ruthenium（Ⅱ） dye Z907. A reversible couple at E1/2=0.725 V vs. saturated calomel electrode （SCE） with a separation of 0.08 V between the anodic and cathodic peaks, was observed due to the Ru^Ⅱ/Ⅲ couple by cyclic voltammetry. Furthermore, this amphiphilic ruthenium complex was successfully used as sensitizers for dye-sensitized solar cells with the efficiency of 3.72% at the 100 mW·cm^-2 irradiance of air mass 1.5 simulated sunlight without optimization of TiO2 films and the electrolyte.     

枸杞多糖对白血病细胞作用热化学特征研究

用微量热法研究了枸杞多糖对小鼠白血病细胞L1210代谢作用的热化学特征。结果表明，枸杞多糖对L1210细胞代谢有明显的抑制作用，为枸杞在防治肿瘤中的应用提供了可靠的信息。     

Investigation of the electrocatalytic oxidation of formate and ethanol at platinum black under microbial fuel cell conditions

In this communication, we discuss the electro-oxidation of the fermentation products formate and ethanol at platinum black modified electrodes under microbial fuel cell conditions, i.e., at neutral pH, room temperature, and in microbial culture solutions. The electrocatalytic oxidation was studied using cyclic voltammetry, chronoamperometry, and potentiostatic coulometry. Current densities up to 6 mA cm⁻² at 0.2 V oxidation potential and 97% coulombic efficiency were observed for the electro-oxidation of 100 mM solutions of formate in pH 7 buffer solution. Electrode deactivation could be successfully prevented using an oxidative potential reactivation procedure. Polymer coating, however, fully stopped the formate oxidation. As expected, the electro-oxidation of ethanol was less efficient—with a limiting current density being 600 μA cm⁻².Dedicated to Professor Dr. Alan M. Bond on the occasion of this 60th birthday.     

The dependence of sorbent/analyte type on observed differences in supercritical fluid extraction efficiencies employing extraction vessels of different dimensions

Summary The effect of extraction cell dimensions (i.d.: length) on supercritical fluid extraction (SFE) efficiencies of polychlorinated biphenyls (PCBs) is shown to be dependent on the type of sorbent used. For octadecylsilane (C18) sorbents, there is a significant increase in observed SFE recoveries of PCBs when the cell dimensions are made more broad (increased i.d.: length); whereas, no effect of cell geometry is observed when the common adsorbent, Florisil, is utilized. Additionally, recoveries decreased in proportion to the chlorine number, for the PCBs studied, for octadecylsilane sorbents, while no such effect was observed for Florisil. These results illustrate the magnitude of the matrix effect in SFE, which generally dominated observed recoveries, even in the simplest analyte/sorbent systems such as the one studied here.     

Small-volume radial flow cell for all-solid-state ion-selective electrodes

A flow cell with a radial distribution of four all-solid-state ion selective electrodes (ISEs), or alternatively three ISEs and one reference electrode, was designed and optimized for mass production. The radial distribution of the electrodes reduces the cell volume and is expected to minimize cross-contamination between different electrodes. Two different cell prototypes were developed and tested for all-solid-state K⁺-ISEs based on a solvent polymeric ion-selective membrane (ISM) and a conducting polymer, poly(3,4-ethylenedioxythiophene), as solid internal contact. In the first prototype, PEDOT was electropolymerized from an aqueous solution of the monomer and the doping ion salt, sodium polystyrenesulfonate (NaPSS). The second prototype employed an aqueous dispersion of PEDOT(PSS) that is commercially available (Baytron P, Bayer AG). Compared to electrochemical synthesis, solution casting of the polymer dispersion was found to be a more advantageous method to deposit the conducting polymer layer aiming at mass production. The resulting prototypes of the flow cell had a small volume (ca. 17-37 μl), which makes them suitable for application in clinical analysis.     

Development of new glass composite membranes and their properties for low temperature H2/O2 fuel cells.

A new glass electrolyte formed by constant amounts of titanium oxide (TiO2) and various amount of phosphotungstic acid (PWA) doped P2O5-SiO2 is prepared using the sol-gel process. The structural formation is confirmed by Fourier infrared spectroscopy (FTIR) and from thermogravimetric and differential thermal analysis (TG/DTA) measurements, the glasses display good thermal stability. Further characterisation is undertaken by N2 adsorption/desorption measurements, proton conductivity and hydrogen permeability analyses and a H2/O2 fuel cell test is also performed. The glass materials with large pores and specific surface area are suitable for use as the electrolyte in H2/O2 fuel cells. The effect of TiO2 processing with constant amount of PWA in phosphosilicate glasses, is investigated and discussed. The hydrogen permeability is 1.57x10(-11) mol cm(-1) s(-1) Pa(-1) at 110 degrees C for 0.8 mm thick glass; a power density of 46.3 mW cm(-2) at 125 mA cm(-2) and a current density of 175 mA cm(-2) is obtained (T=28 degrees C, relative humidity).     

Biofuel cell anode based on the Gluconobacter oxydans bacteria cells and 2,6-dichlorophenolindophenol as an electron transport mediator

A basic scheme of the use of the Gluconobacter oxydans bacteria cells as a biocatalyst at an anode of a biofuel cell with air-based cathode is raised up. The anode and cathode of the cell are made of graphite; 2,6-dichlorophenolindophenol serves as an electron transport mediator; and glucose is the substrate to be oxidized. The open-circuit voltage is 55 mV, for the bacteria cell, the mediator, and glucose concentrations of 3 mg/ml (raw weight), 34 mM, and 10 mM, respectively. The voltage and current of the biofuel cell loaded with an external resistance of 10 kohm are 5.6 mV and 0.56 mA. The cell’s internal resistance is 88 kohm.     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.