低温退火磷吸杂工艺对低少子寿命铸造多晶硅电性能的影响

本文针对低少子寿命铸造多晶硅片进行试验, 通过一种将多温度梯度磷扩散吸杂工艺与低温退火工艺结合的新型低温退火吸杂工艺, 去除低少子寿命多晶硅片中影响其电性能的Fe杂质及部分晶体缺陷, 提高低少子寿命多晶硅所生产的太阳电池各项电性能. 通过低温退火磷扩散吸杂工艺与其他磷扩散吸杂工艺的比较, 证明了低温退火吸杂工艺具有更好的磷吸杂和修复晶体缺陷的作用. IV-measurement发现经过低温退火工艺处理后的低少子寿命多晶硅, 制备的太阳电池光电转换效率比其他实验组高0.2%, 表明该工艺能有效地提高低少子寿命多晶硅太阳电池各项电性能参数及电池质量. 本研究结果表明新型低温退火磷吸杂工艺可将低少子寿命硅片应用于大规模太阳电池生产中, 提高铸造多晶硅材料在太阳能领域的利用率, 节约铸造多晶硅的生产成本. 关键词： 低温退火 磷吸杂 低少子寿命多晶硅 太阳电池     

噪声模态单元预判的经验模态分解脉冲星信号消噪

为了改善脉冲星辐射脉冲信号的消噪效果, 提出了一种基于噪声模态单元预判的经验模态分解(EMD) 消噪声方法. 该方法首先利用EMD将含噪辐射脉冲信号分解为一组内蕴模态函数(IMF), 根据IMF系数的统计特性采用局部均方误差准则进行噪声模态单元预判, 并将噪声模态单元置零; 然后对噪声模态单元预判处理后的IMF以模态单元为基本单位进行最优比例萎缩消噪, 从而达到抑制噪声、保留信号的目的. 实验结果表明: 与Sure Shrink小波阈值法、Bayes Shrink小波阈值法和EMD模态单元比例萎缩法相比, 基于噪声模态单元预判的EMD消噪方法可以更有效地去除脉冲辐射信号中的噪声, 同时更好地保留信号突变处的细节信息特征, 在信噪比、 均方误差、峰值相对误差、峰位误差和相位误差等方面都有一定程度的改善. 关键词： 脉冲星信号消噪 经验模态分解 噪声模态单元预判 局部均方误差     

非晶硅界面缓冲层对非晶硅锗电池性能的影响

针对非晶硅锗电池本征层高锗含量时界面带隙失配以及高界面缺陷密度造成电池开路电压和填充因子下降的问题,通过在PI界面插入具有合适带隙的非晶硅缓冲层,不仅有效缓和了带隙失配,降低界面复合,同时也通过降低界面缺陷密度改善内建电场分布,从而提高了电池的收集效率. 进一步引入IN界面缓冲层以及对非晶硅锗本征层进行能带梯度设计,在仅采用Al背电极时,单结非晶硅锗电池转换效率达8.72%. 关键词： 非晶硅缓冲层 非晶硅锗薄膜太阳电池 带隙 界面     

楔形盒染料掺杂胆甾相液晶激光器研究

设计制作了楔形盒掺杂激光染料PM580的胆甾相液晶器件, 研究了激光辐射行为. 在楔形液晶盒中出现了一系列与楔棱平行的向错线和不同规则形状的晶畴, 胆甾相液晶形成了平面态排列. 采用固体Nd:YAG倍频532 nm 波长激光作为抽运光, 获得调谐精度约1 nm, 调谐范围约17 nm的一维波长可调谐激光器. 楔形盒中, 液晶扭曲力与取向膜表面锚定力相互平衡的过程中胆甾相液晶螺距伸张, 光子禁带位置移动, 从而调谐光子禁带边沿出射激光波长. 关键词： 胆甾相液晶 楔形盒 激光辐射     

Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study

Impedance spectroscopy was used to study the oxygen reaction kinetics of La_0.8Sr_0.2MnO₃ (LSM)-based electrodes on Y₂O₃-stabilized ZrO₂ (YSZ) electrolytes. Three types of electrodes were studied: pure LSM, LSM–YSZ composites, and LSM/LSM–YSZ bilayers. The electrodes were formed by spin coating and sintering on single-crystal YSZ substrates. Measurements were taken at temperatures ranging from 550 to 850°C and oxygen partial pressures from 1×10⁻³ to 1 atm. An arc whose resistance R_el had a high activation energy, E_a=1.61±0.05 eV, and a weak oxygen partial pressure dependence, (P_O2)^−1/6, was observed for the LSM electrodes. A similar arc was observed for LSM–YSZ electrodes, where R_el(P_O2)^−0.29 and the activation energy was 1.49±0.02 eV. The combination of a high activation energy and a weak P_O2 dependence was attributed to oxygen dissociation and adsorption rate-limiting steps for both types of electrodes. LSM–YSZ composite cathodes showed substantially lower overall interfacial resistance values than LSM, but exhibited an additional arc attributed to the resistance of YSZ grain boundaries within the LSM–YSZ. At 850°C and low P_O2, an additional arc was observed with size varying as (P_O2)^−0.80 for LSM and (P_O2)^−0.57 for LSM–YSZ, suggesting that diffusion had become an additional rate limiting step. Bilayer LSM/LSM–YSZ electrodes yielded results intermediate between LSM and LSM–YSZ. The results showed that most of the improvement in electrode performance was achieved for a LSM–YSZ layer only ≈2 μm thick. However, a decrease in the grain-boundary resistance would produce much better performance in thicker LSM–YSZ electrodes.     

Solving viscoelastic free surface flows of a second‐order fluid using a marker‐and‐cell approach

This work is concerned with the numerical simulation of two‐dimensional viscoelastic free surface flows of a second‐order fluid. The governing equations are solved by a finite difference technique based on the marker‐and‐cell philosophy. A staggered grid is employed and marker particles are used to represent the fluid free surface. Full details for the approximation of the free surface stress conditions are given. The resultant code is validated and convergence is demonstrated. Numerical simulations of the extrudate swell and flow through a planar 4:1 contraction for various values of the Deborah number are presented. Copyright © 2006 John Wiley & Sons, Ltd.     

Application of stain-etched porous silicon in light emitting diodes and solar cells

Porous silicon/c-Si heterostructures have been formed by the method of stain etching.The properties of light emitting diodes (LED) and solar cells have been studied. The transport mechanism of the diode has been investigated from the current–voltage characteristics measured at different temperatures (296–380 K). A model based on multi-step tunneling of carriers at reverse and low forward bias (<1 V) and on field tunneling across a narrow barrier at higher forward bias (>1.5 V) is proposed for the LED. In the case of the solar cells the porous silicon is formed in between the fingers of the front grid contact. Application of porous silicon in solar cells results in an increase of the short-circuit current and efficiency of the cells by about 30%.     

A study of the physiological changes and the nutritional qualities of irradiated apples and the effect of irradiation on apples stored at room temperature

The effects of γ-irradiation on the metabolism and nutritional qualities of cold Delicious apples and on the lethality of verticillate pathogenic fungi have been studied. The storage effect of irradiation on apples at room temperature has been observed. The results showed that the respiratory intensity of irradiated apple at 0.3–0.5 kGy was near or lower than that of unirradiated apple after 15 days irradiation. The amount of ethylene release was obviously inhibited when fruits were irradiated with 0.3–0.7 kGy. The flesh firmness of apple irradiated with 0.3–0.9 kGy was higher than that of unirradiated apple with the increasing of storage time. The negative correlations between the flesh firmness and the activities of pectinesterase (PE), polygalacturonase (PG) were observed when the dosage was lower than 1.5 kGy. The 2.0 kGy irradiation damaged the ultrastructure of cells, induced the softening of apple. When apples were irradiated with 0.7–2.0 kGy, the contents of 4 important volatile components of apple would be decreased. However, the dosage mentioned above had no effects on the pure chemicals. The studies showed that there was no significant effect of irradiation with 0.3–2.0 kGy on the nutritional qualities of apples and this dosage range could effectively control the verticillate pathogenic fungi. The result of storage experiments showed that the rotting fruits were obviously decreased by 0.3–0.9 kGy irradiation.     

胡萝卜悬浮培养细胞和原生质体的玻璃化法超低温保存

采用玻璃化法成功地超低温保存了胡萝卡悬浮培养细胞及其原生质体，存活率分别为83．3％（TTC法检测）和47％（RDA法检测）。冻后细胞能恢复生长并再生植株。分析了玻璃化法超低温保存植物悬培养浮细胞和原生质体的主要影响因素。     

Wavelength dependent damage in biological multi-photon confocal microscopy: A micro-spectroscopic comparison between femtosecond Ti:sapphire and Cr:forsterite laser sources

Molecular excitation by the simultaneous absorption of two photons provides intrinsic three-dimensional resolution in laser scanning fluorescence microscopy. Thus induced two-photon absorption and the accompanied multi-photon absorption/ionization not only cause photo-bleaching but also cell damage in the vicinity of the focal point. In this paper, we study the wavelength dependent cell damage induced by high intensity femtosecond near infrared lasers. The study was performed with a Ti:sapphire laser and a Cr:forsterite laser. With a longer output wavelength from a Cr:forsterite laser, multi-photon absorption and auto-fluorescence were found to be significantly suppressed and the destructive plasma formation was found to be greatly reduced. Sustained multi-photon spectra can be observed in most plant specimens with a tightly focused Cr:forsterite laser beam under long term irradiation with more than 100 mW laser average power. In contrast, multi-photon absorption induced destructive plasma formation were frequently observed with a tightly focused Ti:sapphire laser beam within seconds with more than 10 mW laser average power.