Superhydrophobic-Superhydrophilic Micropatterning: Towards Genome-on-a-Chip Cell Microarrays

High-density cell microarrays based on superhydrophilic microspots separated by superhydrophobic barriers have been realized. The microspots absorb water solutions, while the barriers prevent cross-contamination, thus allowing the spots to be used as reservoirs for transfection mixtures and preventing cell proliferation and cell migration between the microspots. The picture shows four cell types after two days of culturing on the microarray.     

Structure–Function Relationships of New Lipids Designed for DNA Transfection

Cationic liposome/DNA complexes can be used as nonviral vectors for direct delivery of DNA‐based biopharmaceuticals to damaged cells and tissues. To obtain more effective and safer liposome‐based gene transfection systems, two cationic lipids with identical head groups but different chain structures are investigated with respect to their in vitro gene‐transfer activity, their cell‐damaging characteristics, and their physicochemical properties. The gene‐transfer activities of the two lipids are very different. Differential scanning calorimetry and synchrotron small‐ and wide‐angle X‐ray scattering give valuable structural insight. A subgel‐like structure with high packing density and high phase‐transition temperature from gel to liquid‐crystalline state are found for lipid 7 (N′‐2‐[(2,6‐diamino‐1‐oxohexyl)amino]ethyl‐2,N‐bis(hexadecyl)propanediamide) containing two saturated chains. Additionally, an ordered head‐group lattice based on formation of a hydrogen‐bond network is present. In contrast, lipid 8 (N′‐2‐[(2,6‐diamino‐1‐oxohexyl)amino]ethyl‐2‐hexadecyl‐N‐[(9Z)‐octadec‐9‐enyl]propanediamide) with one unsaturated and one saturated chain shows a lower phase‐transition temperature and a reduced packing density. These properties enhance incorporation of the helper lipid cholesterol needed for gene transfection. Both lipids, either pure or in mixtures with cholesterol, form lamellar phases, which are preserved after addition of DNA. However, the system separates into phases containing DNA and phases without DNA. On increasing the temperature, DNA is released and only a lipid phase without intercalated DNA strands is observed. The conversion temperatures are very different in the two systems studied. The important parameter seems to be the charge density of the lipid membranes, which is a result of different solubility of cholesterol in the two lipid membranes. Therefore, different binding affinities of the DNA to the lipid mixtures are achieved.     

Low Molecular Weight PEI‐Based Vectors via Acid‐Labile Ortho Ester Linkage for Improved Gene Delivery

A series of novel pH‐sensitive gene delivery vectors (POEI 1, 2, and 3) are synthesized through Michael addition from low molecular weight PEI (LMW PEI) via acid‐labile ortho ester linkage with terminal acrylates (OEAc) by various feed molar ratios. The obtained POEI 1 and POEI 2 can efficiently condense plasmid DNA into nanoparticles with size range of 200–300 nm and zeta‐potentials of about +15 mV while protecting DNA from enzymatic digestion compared with POEI 3. Significantly, ortho ester groups of POEI main‐chains can make an instantaneous degradation‐response to acidic endosomal pH (≈5.0), resulting in accelerated disruption of polyplexes and intracellular DNA release. MTT assay reveals that all POEIs exhibit much lower cytotoxicity in different cells than branched PEI (25 KDa). As expected, POEI 1 and POEI 2 perform improved gene transfection in vitro, suggesting that such polycations might be promising gene vectors based on overcoming toxicity‐efficiency contradiction.

     

Intracellular Delivery and Triggered Release of DNA Using Biodegradable Poly(2‐hydroxypropylene imine)s Containing Cystamine Units

Poly(2‐hydroxypropylene imine)s containing segments of cystamine (PHPI‐CA) are synthesized by polycondensation of 1,3‐dibromo‐2‐propanol with a mixture of 1,3‐diamino‐2‐propanol and cystamine. High molecular weight fractions of these polymers are collected by ultrafiltration and characterized by chemical analysis, ¹H and ¹³C‐NMR spectroscopy, size‐exclusion chromatography with triple detection, and potentiometric titration, and are tested for DNA delivery in vitro. It is shown that PHPI‐CA are highly branched polymers containing disulfide linkages. Transfection efficiency of PHPI‐CA for DNA gives similar results to that of PHPI with GFP⁺ cell percent reaching 80–90%. Cytotoxicity levels for PHPI‐CA are lower than that of PHPI. Novel polymers containing different amounts of disulfide linkages are able to disintegrate and release DNA following the treatment with reducing agent 1,4‐dithiothreitol. Downstream application of PHPI‐CA transfected cells for RNA purification shows that RNA yield is not affected even after the double transfection suggesting that these polymers could be great candidates for in vitro and in vivo transfection.

     

N,N,N-Trimethylchitosan chloride as a gene vector: synthesis and application

N,N,N-Trimethylchitosan chloride with different degrees of quaternization has been synthesized and characterized by (1)H NMR spectroscopy. The particle size ranges from 150 to 600 nm, which is dependent on the N/P ratio and is less influenced by the degree of quaternization. The majority of the particles have a spherical morphology. The zeta potential of the particles increases with the N/P ratio and the quaternization degree of TMC. Short-term contact experiments show good biocompatibility of TMC, but long-term contact experiments reveal its high toxicity. This study suggests that TMC is a promising gene carrier, but further modification is still required to improve its cytocompatibility.     

Polyethylenimine （PEI）-g-comb-poly（ethylene glycol）-transferrin（Ⅰ）： Tumor-targeted Vector for Gene Delivery In.vitro

The work described the synthesis and evaluation of PEI-g-comb-PEG-transferrin as a potential system for gene therapy in vitro. The MW of PEG was 10KDa, and PEI was 2KDa. Its structure was identified by NMR, FT-IR and TGA spectroscopy. MTT assay found that at concentration up to 4000 n mol/L of the polymer, cell viability was over 85%. The bio-character of polymer/DNA complex was characterized by agarose gel electrophoresis, ethidium bromide exclusion and zeta-potential assay. The polymer could retardate DNA at N/P ratio 3.0-3.5 （mol/mol）. The particle size of the polymer/DNA complex was less than 300 nm. Transfection efficiency of the complex was studied in COS7 and NT2 cell lines.     

Studies of poly-<Emphasis Type="Italic">L</Emphasis>-lysine-starch nanoparticle preparation and its application as gene carrier

Anion starch nanoparticle (StNP) with a diameter of 50 nm was prepared in water-in-oil microemulsion, with soluble starch as raw materials and POCl₃ as crosslinking agent. PLL-StNP was prepared by linking poly-L-lysine (PLL) on the surface of StNP. At the same time, the size of PLL-StNP and its stability in aqueous solution were checked by AFM. The analysis of plasmid DNA binding, DNase I enzymatic degradation, toxicity and transfection were done. We discovered that PLL-StNP may be used as non-virus nanoparticle gene carrier. And we developed the method of preparing PLL-StNP gene carrier and used it in cell transfection. As non-virus gene carrier, PLL-StNP has some advantages, such as large load of DNA, high transfection efficiency, low cell toxicity and biodegradability.     

A Novel Approach for Introducing Bio-Materials Into Cells

A novel approach was developed to introduce biological materials into cells for gene transfection and gene therapy applications. The method is based on the technique of electrospraying bio-materials into cells. A prototype apparatus was constructed for a feasibility study. The features of the gene transfector include: (1) A dual-capillary assembly to spray suspensions of biological materials. The outer capillary provided sheathing liquid that controlled the charge level on individual particles without altering the properties of suspensions. (2) An air–CO₂ gas mixture was used for suppressing possible corona discharge and kept the same gas composition as those in incubators. (3) The designed chamber enabled the spray to operate at reduced pressure for increasing sprayed particle velocity. In the feasibility study, both suspensions of plasmid and plasmid-coated gold particles were used. The plasmid used was the commercially available Enhanced Green Fluorescent Protein gene. COS-1 cells were used as the target and the liquid media was evacuated immediately prior to the spraying process. Electrospraying was conducted at ambient pressure and the duration was no more than 2 min. After the spray transfection, the media was immediately replaced and the cell samples were returned to the incubator for 36 h. Transgene expression was detected by cellular fluorescence. This technology promises to have great potential for gene transfection and therapy studies.     

Hydrophobic polyphenylalanine-grafted hyperbranched polyethylenimine and its in vitro gene transfection

A series of amphiphilic multi‐armed PPn copolymers were prepared by ROP of Phe‐NCA with PEI‐25k as a macroinitiator. The particle size of the PPn/DNA complexes was about 100 nm and the zeta potentials were below 20 mV. An MTT assay demonstrated that all the PPn copolymers had lower cytotoxicity compared to PEI‐25k. In vitro gene transfection studies were also conducted in HeLa, 293 and CT 26 cells. The optimal quantity of hydrophobic phenylalanine segments in PP80 led to higher transfection efficiency in various cell lines based on this study. The results indicate that PP80 was the best candidate for gene delivery among these PPn copolymers.