Studies of the Atrazine Aqueous Suspension Stability in the Presence of an Anionic Polymer—Influences of Polymer Molecular Weight and Solution pH

The influence of the molecular weight of sodium salt of styrene/methacrylic acid (SSMA) copolymers and solution pH value (range of 3–11) on the stability of the atrazine suspension was studied. SSMA with different molecular weights was synthesized by emulsion polymerization. Adsorption, zeta potential measurements, microscopy, and suspension stability measurements were carried out. The obtained results indicate that the adsorption of SSMA on the surfaces of atrazine particles decreases with the increase of the molecular weight, and the hydrogen bonding is the main adsorption force. The presence of SSMA improves the stability of the atrazine suspension. The stability of the atrazine suspension decreases with the increase of the molecular weight of SSMA. On the other hand, the stability of the atrazine suspension with SSMA increases firstly and then decreases with the increase in solution pH in the range of 3–11.     

Motional narrowing under diffusion of two spin sub-lattices in LiNaSO4

An expression for the dipolar correlation function characterizing the fluctuations of the Hamiltonian under uncorrelated diffusion of two cationic sub-lattices in a solid has been obtained. A corresponding formula, which can be used for fitting the two-step temperature dependencies of the NMR line width, has been deduced. We also considered the case of a distribution of correlation times and deduced a corresponding analytical fitting function. Elaborated expressions have been applied to the NMR line width analysis of LiNaSO₄ in the temperature range 295–788 K.     

Convenient sulfonylation of benzotriazoles with the in situ–generated sulfonyl bromides

A convenient procedure is developed for the preparation of N-sulfonylbenzotriazoles from sodium sulfinates, benzotriazoles, and sodium bromide in the present of m-chloroperbenzoic acid as oxidant. This radical sulfonylation proceeds efficiently at room temperature under neutral conditions, affording the corresponding N-sulfonylbenzotriazoles in moderate to good yields in a short time.     

十二烷基磺酸钠增敏电化学法超灵敏地测定尿液中拓扑替康盐酸盐

提出了在一次性电极(改进的石墨浸蜡电极)上,利用十二烷基磺酸钠增敏电化学法亚皮摩尔级测定拓扑替康盐酸盐的方法.考察了不同种类的表面活性剂对拓扑替康盐酸盐的电化学响应.结果表明,十二烷基磺酸钠能够显著地提高其电化学响应.在优化的实验条件下,氧化峰电流跟拓扑替康盐酸盐浓度的对数在2.0×10-12至1.0×10-11mol/L和8.0×10-11至8.0×10-10mol/L范围内成线性关系,检出限为6.4×10-13mol/L.该方法用于检测尿液中的拓扑替康盐酸盐.     

The Influence of Addition of Inorganic Carbonates on the Relative Volatility Factor of Light and Heavy Water at Temperatures Close to the Isotope Effect Inversion Temperature

The influence of Na₂, CO₃, K₂CO₃, and Li₂CO₃ addition on the relative volatility factor α of light and heavy water ai temperatures close to the isotope effect inversion temperature has been investigated. The measurements for Na₂CO₃ and K₂CO₃ solutions have been made in the temperature range. 100–330 °C at various salt concentrations. In the case of Li₂CO₃ temperature range and concentration was limited by the solubility of this salt. The factor α was determined by analysis of gas and liquid phases at equilibrium. Data on pure waters obtained by other investigators are listed for comparison. The temperature dependence of factor α for salt solutions and pure waters is presented in the form of equations derived from experimental data.     

Understanding the Origins of Nucleophilic Hydride Reactivity of a Sodium Hydride–Iodide Composite

Sodium hydride (NaH) has been commonly used as a Brønsted base in chemical syntheses, while it has rarely been employed to add hydride (H^?) to unsaturated electrophiles. We previously developed a procedure to activate NaH through the addition of a soluble iodide source and found that the new NaH–NaI composite can effect even stereoselective nucleophilic hydride reductions of nitriles, imines, and carbonyl compounds. In this work, we report that mixing NaH with NaI or LiI in tetrahydrofuran (THF) as a solvent provides a new inorganic composite, which consists of NaI interspersed with activated NaH, as revealed by powder X‐ray diffraction, and both solid‐state NMR and X‐ray photoelectron spectroscopies. DFT calculations imply that this remarkably simple inorganic composite, which is comprised of NaH and NaI, gains nucleophilic hydridic character similar to covalent hydrides, resulting in unprecedented and unique hydride donor chemical reactivity.     

A review on enzyme and ultrasound: A controversial but fruitful relationship

A critical review on the effect of ultrasound (US) on enzymes and their biocatalytic action is presented here. Discussion on the information users of US acquire before utilizing the different devices, and the importance they give to US frequency is constant along the review. The authors have gone into the different areas in which the US–enzyme binomial has been applied. The lack of enough information on the US–enzyme-working conditions under which each piece of research has been developed, and the necessity to provide complete information on the data and metadata to give enough light on each piece of research (and thus on the potential comparison of results from different studies) are critically exposed. With this aim, the study has been divided into the positive effect of US on enzymes to favor the production of metabolites, polymers or proteins; and the degradation, inhibition or activation of the biocatalyst under US application. Also the effect of US on enzyme production and the main fields of application of the US–enzyme binomial are discussed.     

A green solvent approach to the chemistry of 1,2‐diaryl‐1,2‐disodioethanes

We investigated the generation and the reactivity of selected 1,2‐diaryl‐1,2‐disodioethanes employing cyclopentyl methyl ether and 2‐methyltetrahydrofuran as green solvent alternatives to tetrahydrofuran. Both solvents proved suitable for the generation of these vic‐diorganometals, as well as for their employment as single‐electron transfer reagents. On the other hand, 2‐methyltetrahydrofuran appears as the solvent of choice in reactions involving the employment of these diorganometals as nucleophiles or bases. Accordingly, our results disclose an environmentally more sustainable approach to the chemistry of these diorganometals and, in a wider sense, to reductive metalation reactions. Copyright © 2012 John Wiley & Sons, Ltd.     

Assembly of SnSe Nanoparticles Confined in Graphene for Enhanced Sodium‐Ion Storage Performance

Sodium‐ion batteries (SIBs) have attracted much interest as a low‐cost and environmentally benign energy storage system, but more attention is justifiably required to address the major technical issues relating to the anode materials to deliver high reversible capacity, superior rate capability, and stable cyclability. A SnSe/reduced graphene oxide (RGO) nanocomposite has been prepared by a facile ball‐milling method, and its structural, morphological, and electrochemical properties have been characterized and compared with those of the bare SnSe material. Although the redox behavior of SnSe remains nearly unchanged upon the incorporation of RGO, its electrochemical performance is significantly enhanced, as reflected by a high specific capacity of 590 mA h g^?1 at 0.050 A g^?1, a rate capability of 260 mA h g^?1 at 10 A g^?1, and long‐term stability over 120 cycles. This improvement may be attributed to the high electronic conductivity of RGO, which also serves as a matrix to buffer changes in volume and maintain the mechanical integrity of the electrode during (de)sodiation processes. In view of its excellent Na⁺ storage performance, this SnSe/RGO nanocomposite has potential as an anode material for SIBs.     

Storage of Defective Fuel Pins in SFR Core

An open fuel pin failure is a breach in the fuel pin cladding that allows direct contact between the primary coolant and the nuclear fuel. In this paper we focus on the sodium-fuel interactions in a Sodium cooled Fast neutrons Reactor (SFR), reviewing the main aspects of the fuel pin failure evolution with an emphasis on the Reaction between the Oxide fuel and the Sodium (ROS). This reaction leads to the formation of an uranoplutonate phase with approximately half the density of the initial oxide. In turn this can cause significant fuel swelling and the potential further degradation of the fuel pin. The maximal fuel swelling due to the formation of the uranoplutonate can be estimated for non-irradiated fuel based on the physico-chemical properties of the pellets, as further described in this paper.