Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) by metabolically engineered Escherichia coli strains

Biosynthesis of polyhydroxyalkanoates (PHAs) consisting of 3-hydroxyalkanoates (3HAs) of 4 to 10 carbon atoms was examined in metabolically engineered Escherichia coli strains. When the fadA and/or fadB mutant E. coli strains harboring the plasmid containing the Pseudomonas sp. 61-3 phaC2 gene and the Ralstonia eutropha phaAB genes were cultured in Luria-Bertani (LB) medium supplemented with 2 g/L of sodium decanoate, all the recombinant E. coli strains synthesized PHAs consisting of C4, C6, C8, and C10 monomer units. The monomer composition of PHA was dependent on the E. coli strain used. When the fadA mutant E. coli was employed, PHA containing up to 63 mol% of 3-hydroyhexanoate was produced. In fadB and fadAB mutant E. coli strains, 3-hydroxybutyrate (3HB) was efficiently incorporated into PHA up to 86 mol%. Cultivation of recombinant fadA and/or fadB mutant E. coli strains in LB medium containing 10 g/L of sodium gluconate and 2 g/L of sodium decanoate resulted in the production of PHA copolymer containing a very high fraction of 3HB up to 95 mol%. Since the material properties of PHA copolymer consisting of a large fraction of 3HB and a small fraction of medium-chain-length 3HA are similar to those of low-density polyethylene, recombinant E. coli strains constructed in this study should be useful for the production of PHAs suitable for various commercial applications.     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

Conductometric study of cationic and anionic complexes in propylene carbonate

Conductivity data are used to determine thermodynamic complex formation constants for cases in which both the initial electrolyte and the complexed electrolyte form ion pairs. Using the method described in the text, the complex formation constants of Li⁺, Na⁺ and K⁺ with the crown ether 18-crown-6 and of Li⁺ with the ligand triphenylphosphine oxide in propylene carbonate have been evaluated from conductance data. The complexation of AgBr in propylene carbonate solutions of n-etrabutylammonium bromide has also been studied by the measurement of molar conductivities. The results of these studies indicate that ion pairing should not be neglected, even in high permittivity solvents such as propylene carbonate, and that the ion pair association constants correlate well with structural studies on cation-crown ether molecular conformations.     

Thermal properties of sodium acetylacetonate

Sodium acetylacetonate was prepared by the interaction of acetyl acetone with sodium hydroxide. The thermal conductivity, phonon velocity, mean free path, Yong's modulus, and the thermal expansion coefficient were studied. The thermal conductivity of the material decreases with increasing temperature due to the thermal lattice scattering of phonons. The velocity of phonons is also decreased due to the perturbation of thermal phonons. The linear thermal expansion coefficient increases with temperature due to the weakness of the attractive forces between the small Na⁺ cations and bulkier acetylacetonate anions in the lattice.

---

Zusammenfassung Natriumacetylacetonat wurde durch die Wechselwirkung zwischen Acetylaceton und Natriumhydroxid gewonnen. Es wurde die Wärmeleitfähigkeit, die Phononengeschwindigkeit, die mittlere freie Wegstrecke, das Elastizitätsmodul und der Wärmeausdehnungskoeffizient untersucht. Die Wärmeleitfähigkeit der Substanz nimmt wegen der thermischen Gitterstreuung der Phononen mit steigender Temparatur ab. Die Geschwindigkeit der Phononen nimmt auf Grund der Perturbierung der thermischen Phononen ebenfalls ab. Der lineare Wärmeausdehnungskoeffizient steigt mit zunehmender Temperatur an, was auf die schwachen Anziehungskräfte zwischen den kleinen Na⁺ Ionen und den massigen Acetylacetonat-Anionen im Gitter zurückzuführen ist.

     

Quantum chemical models of alkali metal hydroxide-water-dimethylsulfoxide superbasic media (MOH-H<Subscript>2</Subscript>O-DMSO,M = Li,Na, K)

Models of alkali metal hydroxide-water-dimethylsulfoxide superbasic media have been constructed using Hartree Fock and DFT (B3LYP) quantum chemical methods; the structure and energies of anion complexes are considered. The hydroxide anion in the models is stabilized as complexes of OH^?·H₂O and OH^?· 2H₂O types.     

用双氧水绿色氧化环己酮合成己二酸的研究

以30%的双氧水为氧化剂, 钨酸钠与含N或O的双齿有机配体(草酸)形成的络合物为催化剂, 在无有机溶剂、无相转移剂的条件下, 研究了环己酮氧化制己二酸的反应. 研究结果表明, 用廉价的草酸为配体, 最佳反应条件为钨酸钠∶草酸∶环己酮∶30%的双氧水的物质的量比为2.0∶3.3∶100∶350, 在92 ℃下反应12 h, 可制得80.6%的己二酸; 用GC-MS跟踪了氧化过程中三种主要物质环己酮、己内酯及己二酸含量随反应时间的变化关系, 提出了其主要氧化机理为环己酮首先经Beayer-Villiger氧化反应生成己内酯, 己内酯进一步氧化成己二酸.     

Two-dimensional catena–polymer [[[bis (µ-aqua)(bis (µ-cpiap-K2O1:O2)sodium(I))] (µ-chlorido) bis(µ-cpiap-K5N1:O1:O2:O3,O3′)dicopper(II)]bis(µ-aqua)(aqua)bis(cpiap-K2O1,O2)copper(II)] hexa hydrate

The new title two-dimensional hetero-tetra nuclear Cu₃–Na coordination polymer {[NaCu₃Cl(cpiap)₂(H₂O)₃]_n·6nH₂O} (1) consists of crystallographically two-independent copper(II) centers, each bridged by a sodium cation through carboxylate-oxygen of the deprotonated H₃cpiap ligand (H₃cpiap = 2-(carboxyphenyl)iminoaceticpropanoic acid) to Cu^II (2) and Cu^II (2⁻) cations, and through water molecules to Cu^II (1) cation. Cu^II (2) and Cu^II (1) cations are bridged by carboxylate-oxygen atoms of the ligand in a syn-anti mode which, alternate regularly within the chain being bridged by a tetra coordinated sodium cation. Each Cu^II (2) and Cu^II (2⁻) cation in (1) is in an octahedral environment formed by four carboxylate-oxygens from two cpiap³⁻ ligands, one nitrogen atom and a bridging chloride atom. Cu^II (1) cation is in a square pyramidal environment formed by three water molecules and two carboxylate-oxygens from two cpiap³⁻ ligands. The ligand acts simultaneously as monodentate and tridentate toward Cu^II (1) and Cu^II (2) cations respectively. The lattice water molecules involved in OH···O hydrogen bonding are situated in the void spaces between layers. The zigzag chains, which run along the b-axes further construct three-dimensional metal-organic framework via hydrogen bonding and weak face-to-face π-π interactions. Weak CH···O interactions are also present.     

硫酸氢钠催化合成己酸异戊酯的研究

己酸异戊酯是应用最广泛的食用香料之一。通常它是在硫酸催化下由己酸和异戊醇酯化反应而得[1] ,硫酸虽然活性高 ,价廉 ,但选择性差 ,产品质量不好 ,设备腐蚀严重 ,同时产生大量废液 ,污染环境。已发现对甲苯磺酸、磺酸树脂、固体超酸、杂多酸、氯化铁以及过渡金属硫酸盐等均可作为酯化反应的优良催化剂[2～ 7] 。本文探讨了硫酸氢钠催化羧酸的酯化反应 ,结果发现它具有良好的催化性能 ,且后处理方便 ,无污染。1　实验部分在装有分水器、温度计和回流冷凝器的四颈烧瓶中 ,加入一定量分析纯的己酸、异戊醇、甲苯和催化剂硫酸氢钠 (ＮａＨＳＯ…     

Mechanism of the thermal decomposition of hydrophosphites of lithium,sodium and potassium

The thermal decomposition of some M ₂ ^I HPO₃ (M-Li, Na, K) phosphites under nitrogen atmosphere was investigated. A stepwise mechanism of thermal decomposition has been proposed.

---

Zusammenfassung Es wurde die thermische Zersetzung von Phosphiten M ₂ ^I HPO₃ (M-Li, Na, K) in Stickstoffatmosphere untersucht. Die Schritte des Mechanismus der thermischen Zersetzung wurden vorgeschlagen.

     

Enthalpies of solution in sodium octanoate + water + alcohol mixtures

Enthalpies of solution of sodium octanoate in water, 1-propanol and aqueous mixtures of 1-propanol, 1-butanol, 1-pentanol and 1-hexanol, and of the alcohols in aqueous solutions of sodium octanoate at various concentrations were determined calorimetrically at 35 °C. MostH(soln) values are exothermic and strongly dependent on the solute concentration. The main energetic factor governing the process of dissolution of the surfactant is associated with changes in the water structure caused by the presence of alcohol. That governing the process of the alcohol dissolution in surfactant solutions is due to the effect alcohols have on the CMC of the octanoate. There is no indication of the alcohol being either solubilized in the interior of the aqueous micelle, or becoming part of the micellar film.The solubility at 35 °C of sodium octanoate in water, 1-propanol and their mixtures has also been determined.