Densities and Apparent Molar Volumes of Aqueous NaNO3 Solutions at Temperatures from 292 to 573 K and at Pressures Up to 30 MPa

Densities of four aqueous NaNO₃ solutions (0.100, 0.303, 0.580, 0.892 mol-kg^–1 H₂O) have been measured in the liquid phase with a constant-volume piezometer immersed in a precision liquid thermostat. Measurements were made at ten isotherms between 292 and 573 K. The range of pressure was 0.1–30 MPa. The total uncertainty of density, pressure, temperature, and concentration measurements were estimated to be less than 0.06%, 0.05%, 10 mK, and 0.014%, respectively. Values of saturated densities were determined by extrapolating experimental P- data to the vapor pressure at fixed temperature and composition. Apparent molar volumes were derived using measured values of density for the solutions and for pure water. The apparent molar volumes were extrapolated to zero concentration to yield partial molar volumes at infinite dilution. The temperature, pressure, and concentration dependence of partial and apparent molar volumes were studied. The measured values of density and apparent and partial molar volume were compared with data reported in the literature.     

Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

水溶性含C_(60)聚电解质的制备及其与重氮树脂自组装膜AFMFFM的初步研究

通过BPO引发的溶液聚合 ,合成了水溶性的星状C6 0 苯乙烯 苯乙烯磺酸钠的三元共聚物 [Star shapedC6 0 poly(St SS) ],运用自组装技术 ,在水溶液中 ,含C6 0 的三元共聚物与重氮树脂 (Diazoresin)通过正负离子间的吸附力在云母基片上交替一层一层有序地组装成固体膜 .自组装膜经紫外光幅照反应 ,通过重氮基的分解 ,层间连接的离子键转变成共价键 ,从而增加薄膜的稳定性和堆砌密度 .用原子力显微镜 摩擦力显微镜(AFM FFM)考察了C6 0 在膜中的承载作用及比较不同链结构、不同链长、不同层数自组装膜的表面形貌和微摩擦性能 .初步的研究结果显示了聚合物薄膜的微摩擦性能与聚合物的化学结构、链长和膜的层数有密切关系     

钙羧酸钠褪色光度法测定微量碘的研究

提出了以钙羧酸钠褪色光度法测定微量碘的新方法。在盐酸介质中 ,表面活性剂十六烷基三甲基溴化铵 (CTMAB)存在下 ,碘酸根离子定量氧化钙羧酸钠褪色。最大吸收波长λmax=5 95nm ,表观摩尔吸光系数ε =3.1× 10 4 L·mol-1·cm-1。碘浓度在 0～ 5 0 μg 2 5ml范围内服从比耳定律。方法用于加碘食盐中碘的测定 ,结果满意     

Phase Diagram of the System NaF-KF-AlF3

The phase diagrams of the binary system KF-AlF₃ as well as the ternary system NaF-KF-AlF₃ in the range up to 50 mol% AlF₃, were measured using the thermal analysis method. In the system KF-AlF₃ the coordinates of the eutectic points are: E ₁: 8.0 mol% AlF₃, 821.2°C, and E ₂: 45.5 mol% AlF₃, 565.0°C. In the investigated concentration range of the ternary system 2 eutectic points have been found with the calculated coordinates: E ₁: 36.3 mol% NaF, 62.7 mol% KF, 1.0 mol% AlF₃; t=711.2°C; and E ₂: 51.9 mol% NaF, 27.4 mol% KF, 20.7 mol% AlF₃; t=734.5°C. Other eutectic points lie most probably beyond the investigated part of the system. This revised version was published online in July 2006 with corrections to the Cover Date.     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.     

Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.     

THE EFFECTS OF PERFUSION OF LATERAL VENTRICLE WITH CaCl_2 ON THE FEBRILE RESPONSE AND cAMP CONTENT IN PLASMA AND CEREBROSPINAL FLUID DURING LP-INDUCED FEVER

Artificial cerebrospinal fluid (c.s.f.) containing 40 mmol/L excess calcium was perfus-ed through the lateral ventricles of New Zealand white rabbits in order to reduce the Na~+/Ca~(++) ratio in the brain and the effects on both the febrile response and adenosine cyclic mo-nophosphate (cAMP) concentration in plasma and c.s.f, during leucocytic pyrogen (LP)-induced fever were observed. The results showed that cAMP concentration in c.s.f, increas-ed significantly during LP-induced fever while the cAMP level in Plasma remained unchang-ed, and the perfusion of artificial c.s,f, containing 40 mmol/L excess calcium can signif-icantly inhibit not only the febrile response but also the increase in c.s.f, cAMP level,while there appears no effect on plasma cAMP concentration, thus demonstrating that theincrease of Na~+/Ca~(++) ratio causing the increase of cAMP content in the brain may be anessential link in the pathogenesis of LP-induced fever.     

选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

Hydrothermal synthesis of one-dimensional (1D) Na<Subscript>x</Subscript>TiO<Subscript>2</Subscript> nanostructures

Nanorods of sodium titanium dioxide bronze Na_xTiO₂ were synthesized by the hydrothermal treatment of the amorphous TiO₂·nH₂O gel with 10 M NaOH followed by ultrasonication in 0.1 M HCl and thermal treatment (500°C, 10 h). The thermal treatment of the nanorods does not change the morphology of the particles. According to the electron diffraction data, the Na_xTiO₂ nanorods grow along the c axis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–73, January, 2005.