Novel polycationic biocides: Synthesis and antibacterial activity of polymeric phosphonium salts

Various polymeric phosphonium salts and the corresponding low-molecular-weight model compounds were prepared and their antibacterial activities against Staphylococcus aureus and Escherichia coli were explored by the viable cell counting method in sterile distilled water. Antibacterial activity of the polymers was found to be higher than that of the corresponding model compounds, particularly against S. aureus. Furthermore, the polymeric phosphonium salt exhibited a higher activity by 2 orders of magnitude than the polymeric quaternary ammonium salt with the same structure except the cationic part. Compounds with the longest alkyl chain (octyl) studied were found to exhibit particularly high activity, and this finding may be ascribed to the contribution of the increased hydrophobicity of the compounds to the cidal activity. © 1993 John Wiley & Sons, Inc.     

酞菁键合硅胶的制备及分离取代酞菁异构体

制备和表征了一种新的酞菁键合硅胶，三-β-(辛巯基)-β-(磺酰胺基)-酞菁铜键合硅胶。研究了该键合酞菁硅胶作为HPLC固定相的基本色谱性能。实验结果表明，该固定相可以分离四-α-(2，2，4-三甲基-3-戊氧基)酞菁(铜、镍)的4种异构体，也可以观察到四-α-(2，2，4-三甲基-3-戊氧基)无金属酞菁的4种异构体，而商业C₁₈(VERTEX Eurospher)却只能观察到两组峰，表明这种酞菁键合硅胶固定相在分析、分离一些取代酞菁异构体方面比商业C₁₈具有更好的分离效果。     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Negatively charged hyperbranched polyether-based polyelectrolytes

The preparation of carboxylated hyperbranched polyglycerols of narrow polydispersity was achieved by modification (78–90%) of the hydroxyl end groups via Michael addition of acrylonitrile, followed by hydrolysis. High conversion could only be achieved for low molecular weight starting materials (520 and 1,030 g mol⁻¹). The solution properties of the resulting materials were investigated by dynamic light scattering (DLS), showing the formation of large aggregates with size depending on the pH value. After deposition on a negatively charged mica surface, the structures observed by atomic force microscope (AFM) show the coexistence of aggregates and single macromolecules. Most interesting, in the case of the lower molecular weight sample (PG 520 g mol⁻¹), extended and ordered terrace structures were formed, which are unprecedented for hyperbranched polymers and are of interest for surface modification in general.     

Small angle X-ray scattering study of an extremely elongated micelle system of CTAB-p-toluidine solution

Whenp-toluidine is added to an aqueous solution of CTAB, a remarkable increase of viscosity is accompanied by a spectacular elasticity. We detected the existence of extremely elongated rod-like micelles in electron micrographs. SAXS measurements indicate a closely packed array of cylindrical rod-like micelles, brought about when solutions flow through a thin capillary. A scattering maximum ofd=160 Å almost corresponds to the distance between the nearest neighbours of the cylindrical rod-like micelles. This value agrees with the diameter measured on electron micrographs. The second broad peak (d=75 Å) is assigned to a subsidiary maximum of the shape function of the cylinder with infinite length.     

Cationic amino-containing N-isopropyl- acrylamide–styrene copolymer latex particles: 1-Particle size and morphology vs. polymerization process

 Cationic hydrophilic copolymer latexes were synthesized at 70 °C either by batch or two-step emulsifier-free emulsion poly-merization of styrene (St), N-iso-propylacrylamide (NIPAM), and aminoethylmethacrylate hydro-chloride (AEM) using 2,2′-azobis (2-amidinopropane) dihydrochloride as initiator. At first, batch polymerization kinetics were followed by gas chromatography (GC), revealing that NIPAM rapidly homopolymerized, before the polymerization of styrene had started. Particle size analysis by quasi-elastic light scattering (QELS) and transmission electron microscopy (TEM) showed that monodispersed particles were obtained with the formation of a poly[NIPAM] rich shell. Adding a small amount of the cationic monomer caused a strong decrease of the particle size without affecting the size monodispersity. When a shot process was used, a narrow particle size distribution was maintained, provided that the monomer addition was performed at a relatively high conversion of the first batch step. The poly[NIPAM] rich shell layer was larger with the shot process, but increasing the amino-containing monomer in the recipe resulted in a dramatic decrease of the thickness. Combination of transmission, scanning and atomic force microscopy techniques showed that these hydrophilic particles exhibited odd-shaped structures, the unevenness being dependent upon the performed process. Kinetic data and particle morphology information were inferred for discussion of the polymerization mechanism of this system. Received: 21 August 1997 Accepted: 22 October 1997     

Phase behaviour and microstructures of microemulsions (I)

By the orthogonal design, the optimal formation conditions for the middle-phase microemulsions in the system dioctadecyldimethylammonium chloride (DODMAC)/ sodium dodecyl sulfate (SDS)/n-butanol/n-hep-tane/brine were obtained as follows: W_DODMAC: W_SDS = 1:4-1:5,C _π-butanol (%) = 11.0-12.0, andC _NaCl (%) = 3.25 Investigations have been made on the effects of the concentrations of NaCl and n-butanol (l.0%-14.0%), the ratios ofWDODMAC: to W_SDS, and the kinds of alcohols (n-propanol, n-butanol, and n-pentanol) on the formation, the phase behaviour, the ultralow interfacial tensions, the optimal salinity (S^*), and the length of salinity (δS). Some rules and data were worked out about the formation and characteristics of the middle-phase microemulsions. The mi-crostructures of the middle-phase microemulsions were also studied by using FT-IR, ESR, and freeze fracture electron microscopy techniques. The results from the three methods show that the microstructures of the middlephase mi-croemulsions undergo the change from O/W to bicontinuous (B.C.) and to W/O. The distribution rule of the orga-nized molecule assemblies in the middle-phase microemulsions is conducible to constructing the model of microemulsion systems, to recognizing the microstructures of the middle-phase microemulsions, and to setting forth the relationship between the microstructures and macro-properties of rnicroemulsions. Project supported by the Niltional Natural Science Foundation of China and the Chinese Postdoctoral Science Foundation.     

改进黏度在线凝胶色谱的测定结果

黏度在线凝胶色谱是一种同时配备浓度和黏度检测器的凝胶色谱，由于其测定过程简单直接，被越来越多地广泛采用，但因为数据处理方式和仪器精度的问题，其数均分子量、重均分子量与分散度结果存在较大误差．实验表明，选择适当的谱峰叠加处理、改进普适校正曲线精度、调整标样进样方式以及选择合适的积分点等手段可以明显改善存在的问题，从而大幅度地提高数均分子量、重均分子量与分散度的结果准确性。     

Solvent-free Mukaiyama aldol reaction of O-silyl dienolates catalyzed by benzoic acid

The vinylogous aldol reaction of O-silyl dienolates deriving from 2,2-dimethyl-[1,3]-dioxin-4-ones proceeds in moderate to excellent yields in the presence of catalytic amounts of PhCOOH under solvent-free conditions. Modest to good yields can be obtained by using silica gel or 3 Å molecular sieves as heterogeneous catalysts.     

The effect of the counterion composition on the chain restriction in the cationic polymerization of isobutylene

The effects of the nature of halogens in the initiatingtert-butyl halide-aluminum-containing Lewis acid system on the number average molecular weightM _n and the structure of end groups of polyisobutylene macromolecules obtained in the cationic polymerization of isobutylene in hexane at -78 °C were studied. An increase inM _n is observed in the transition from chlorine to bromine and iodine, accompanied by a decrease in the fraction of end C=C groups and an increase in the relative content of C-Hal groups (Hal = Cl, Br, and I). When atoms of different halogens are present in the counterion, more bulky atoms preferentially participate in the formation of the end groups. The results are interpreted within the framework of the principle of hard and soft acids and bases.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1184–1187, May, 1996.