Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

Catalysis of ring-opening and vinyl polymerizations by dicobaltoctacarbonyl

In the presence of Si? H containing cocatalysts, dicobaltoctacarbonyl has been found to very efficiently catalyze the ring-opening polymerization of cyclic ethers, especially epoxides, as well as certain vinyl monomers. The reaction conditions employed are very similar to those used in Co₂(CO)₈ catalyzed hydrogenation and hydrosilylation reactions. Detailed investigations have been carried out to elucidate the nature of the active species for this catalytic system. A cationic mechanism is proposed based on the experimental results of those investigations.     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Structural changes in the monomeric despentapeptide (B30-B26) insulin crystal

Insulin modified by the removal of its 5 B chain C terminal residues is monomeric but remains substantially potent. The crystal structures of the beef and insulin (dpi) with two molecules in the asymmetric unit has been determined by x-ray analysis. The 3-dimensional structure ofdpi proves to be generally similar to that of native molecule in 2Zn insulin. More detailed comparison reveals that the slight differences in the two independent molecules of beefdpi are distributed uniformly throughout the structure in contrast to insulin in 2Zn insulin, where the structural changes are concentrated in specific regions. The loss of symmetry in thedpi crystal appears to be the inability of the A9 serine to pack effectively in the C2 cell. The efficient packing of the sheepdpi molecule whose crystal structure has also been determined and where A9 is glycine supports this conclusion.     

Cationic ring‐opening polymerization of monothiocarbonate with a norbornene group

This work deals with the cationic ring‐opening polymerization of cyclic thiocarbonates with a norbornene or norbornane moiety, that is, 5,5‐(bicyclo[2.2.1]hept‐2‐ene‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC1 ) or 5,5‐(bicyclo[2.2.1]heptane‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC2 ), respectively. The reaction of TC1 initiated by trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), boron trifluoride etherate (BF₃OEt₂), or triethyloxonium tetrafluoroborate (Et₃OBF₄) afforded unidentified products; however, TC1 underwent cationic ring‐opening polymerization with methyl iodide as an initiator to afford polythiocarbonate because the propagating end was stabilized by the covalent‐bonding property. The polymerization of TC2 initiated by TfOH, TfOMe, BF₃OEt₂, or Et₃OBF₄ afforded polythiocarbonate with good solubility in common organic solvents and a narrow molecular weight distribution because of the absence of a double‐bond moiety. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1698–1705, 2002     

Effects of Nonionic, Cationic, and Mixed Nonionic-Cationic Surfactants on the Acid-Base Behavior of Phenyl Salicylate

The effects of Brij 35 micelles, CTABr micelles, and mixed Brij 35–CTABr micelles on the acid–base behavior of phenyl salicylate (PST) have been studied in aqueous solution containing 2% v/v acetonitrile. The apparent pK_b (pK^app_b) of PST is decreased by 1.5 pK units with the increase in [Brij 35] from 0 to 0.02 M which is attributed to micellar medium effect. The values of pK^app_b remain almost independent of [CTABr] within its range 0.01–0.03 M. The increase in [CTABr] from 0 to 0.03 M in aqueous solution containing 0.02 M Brij 35 has not resulted in a change in pK^app_b. This shows that the characeristic structural features of nonionic Brij 35 micelles remain essentially unchanged on addition of CTABr under the present experimental conditions.     

4-乙酰氨基-4’-甲基丙烯酰氨基-二苯基甲烷的合成及其聚合

N-芳基丙烯酰胺是-类功能性单体,它能与丙烯酸酯类单体进行自由基共聚合。本文以4,4'-二氨基二苯基甲烷为起始原料,合成了新的带有较长侧基的甲基丙烯酰胺类单体,即4-乙酰氨基-4'-甲基丙烯酰氨基-二苯基甲烷(AMDPM)。它能进行自由基聚合或与丙烯酸甲酯(MA)共聚合。     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Interfacial reciprocal grafting by free radical reactions in polymer blends

Recent developments in the field of reactive compatibilization of polymer blends prepared by melt processing focus on the addition of low molecular weight compounds. This work deals with in situ compatibilization through the formation of graft or crosslinked copolymers at the interface. Mixtures of semicrystalline hydrocarbon polymers have been subjected to free radical reactivity, in a co-rotating twin screw extruder (ZSK 30) in a single step. The particular system, high density polyethylene and polyamide 6, was blended in the presence of a peroxide and a reactive bifunctional monomer, maleic anhydride. Because of a combined effect, the reaction appears to occur mainly at the interface, where the resulting grafted copolymer acts as an anchor for the final stabilization of the biphasic system. Different analytical techniques, such as differential scanning calorimetry, scanning electron microscopy and tensile testing, helped in characterizing the resulting blends and confirmed the high level of interfacial grafting and the expected improvement in mechanical properties.     

Synthesis of statistical glycidyl methacrylate‐n‐vinyl pyrrolidone copolymers and their reaction with naproxen

Free‐radical copolymerization of glycidyl methacrylate (GMA) with N‐vinylpyrrolidone (VPD) was carried out at 50 °C using 3.0 mol · L^?1 of N,N′‐dimethylformamide solution and 9.0 · 10^?3 mol · L^?1 of 2,2′‐azobisisobutyronitrile as an initiator. The modification reaction of GMA‐VPD copolymers with a model bioactive carboxylic acid, 6‐methoxy‐α‐methyl‐2‐naphthaleneacetic acid (naproxen), was studied in the homogeneous phase using basic catalysts. The influence of the type of catalyst and the GMA content was evaluated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1192–1199, 2002