High-temperature transformations of Cu-rich hydrotalcites

CuM(II)Al ternary hydrotalcites (M(II) = Ni, Co and Mg) with a (Cu+M(II))/Al atomic ratio of 3.0 and Cu/M(II) atomic ratio of 5.0 were synthesized by coprecipitation under low supersaturation. Powder X-ray diffraction of the as-synthesized samples showed a pattern characteristic of hydrotalcite-like (HT-like) structure (JCPDS: 41-1428). Thermal analyses of these samples showed four stages of weight loss/heat change when recorded in nitrogen. Analysis of the evolved gases characterized the nature of these transformations. The thermoanalytical effects differed significantly especially for the high-temperature transformations, when the treatment was performed in oxygen. In situ powder X-ray diffraction of the samples was carried out to elucidate the phase evolution of these compounds. Surprisingly formation of CuO was noted at temperatures around 200°C well below the destruction of the layered network. The nature of the resulting phases varied with both the nature of the co-bivalent metal ion and the heating atmosphere. FT-IR spectroscopy confirmed the retention of carbonate ions at higher temperatures (above 700°C), although the concentration of carbonate anion (most likely unidentate) varied with the calcination temperature. The crystallinity of CuO increased significantly above 600°C, probably through dissociation of copper oxycarbonate. Significant differences in the thermal transformation temperatures (for the third and the fourth transformations) of these samples containing different co-bivalent metal ions were not observed. This suggests that an association of the co-bivalent metal ions and/or trivalent metal ion in this phase is unlikely. A plausible thermal evolution scheme of these hydrotalcites is proposed.     

相反转技术制备环氧树脂水基体系——相反转过程的流变行为研究

对高乳化剂浓度下的相反转发展过程的流变行为进行了应力扫描、动态频率扫描实验表征．结果表明，乳化剂浓度较高时，体系发生完全相反转；体系在相反转点前为Ｗ／Ｏ结构，其粘度几乎不随剪切应力的改变而改变，表现为牛顿流体行为；体系在相反转点后为Ｏ／Ｗ结构，具有很高的粘弹性，并且在较高剪切应力下表现为典型的假塑性．这是由于高分子水基微粒间通过其表面覆盖的表面活性剂与水形成氢键而产生了一种静态结构，此结构在较高剪切应力作用下破坏而导致假塑性．     

Tricarbonyl(N,N-Disubstituted-Cyclohexadienecarboxamide)iron Complexes: Investigation of the Possible Intramolecular Interaction between the Iron Center and the Amide Substituent

Direct reaction of iron pentacarbonyl with 1-N,N-disubstituted-cyclohexa-2,5-dicnecarboxamide and 1-N,N-disubstituted-cyclohexa-1,3-dienecarboxamide mixture (in which the disubstkuted group is diethyl or diphenyl) gave the isomeric tricarbonyl iron complexes of 2-N,N-disubstituted-1,4-η-cyclohexa-1,3-dienccarboxamide (1), 1-N,N-disubslituted-1,4-η-cyclohexa-1,3-dienecarboxamide (2), and 5-N,N-disubstituted-1,4-η-cyclohexa-1,3-dienecarboxamide (3) and tricarbonyliron complexes of l-N,N-disubstituted-cyclohexenecarboxamide (4). These complexes were separated and characterized by IR, UV-VIS, ¹H NMR, elemental analysis, and mass spectra. Only 1 isomerized to give 2 under acidic conditions; both 1 and 2 undergo hydride abstraction with triphenylmethyl hexafluorophosphatc. Complexes 3, undergo neither isomcrization nor hydride abstraction. According to the spectral data, the possible interaction between carboxamide and iron carbonyl moiety was investigated. The irreversible electrochemical behavior of these complexes were studied.     

ELASTIC BEHAVIOR OF PROTEIN-LIKE SINGLE CHAIN

The conformational properties and elastic behaviors of protein-like single chains in the process of tensile elongation were investigated by means of Monte Carlo method. The sequences of protein-like single chains contain two types of residues: hydrophobic (H) and hydrophilic (P). The average conformations and thermodynamics statistical properties of protein-like single chains with various elongation ratio λ were calculated. It was found that the mean-square end-to-end distance r increases with elongation ratio,λ. The tensor eigenvalues ratio of : decreases with elongation ratio λ for short (HP)x protein-like polymers, however, the ratio of : increases with elongation ratioλ,especially for long (H)x sequence. Average energy per bond increases with elongation ratioλ, especially for(H)x protein-like single chains. Helmholtz free energy per bond also increases with elongation ratioλ. Elastic force (f), energy contribution to force (fU) and entropy contribution to force (fs) for different protein-like single chains were also calculated.These investigations may provide some insights into elastic behaviors of proteins.     

Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior

The isothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) (PBT) in binary blends with poly(ε-caprolactone) (PCL) was investigated as a function of PCL molecular mass by differential scanning calorimetry and optical microscopy. The components are miscible in the melt when oligomeric PCL (M_w = 1250) is blended with PBT, whereas only partial miscibility was found in mixtures with higher molecular mass (M_w = 10,000 and 50,000). The equilibrium melting point of PBT in the homopolymer and in blends with PCL was determined through a non-linear extrapolation of the T_m = f(T_c) curve. The PBT spherulitic growth rate and bulk crystallization rate were found to increase with respect to plain PBT in blends with PCL1250 and PCL10000, whereas addition of PCL50000 causes a reduction of PBT solidification rate. The crystallization induction times were determined by differential scanning calorimetry for all the mixtures through a blank subtraction procedure that allows precise estimation of the crystallization kinetics of fast crystallizing polymers. The results have been discussed on the basis of the Hoffman-Lauritzen crystallization theory and considerations on both the transport of chains towards the crystalline growth front and the energy barrier for the formation of critical nuclei in miscible and partially miscible PBT/PCL mixtures are widely debated.     

Mesoscopic simulation of the aggregation behavior of fluorinated surfactant in aqueous solution

The aggregation behavior of fluorinated surfactant in aqueous solution was investigated using dissipative particle dynamics (DPD) simulation method. Simulation results show that fluorinated surfactants behave mainly as their hydrocarbon analogues, having similar sequences of phases and aggregate structures, which are capable of building micelle, hexagonal phase and lamellar phase. But fluorinated surfactants also show interesting differences from hydrocarbon analogues, which can easily form hexagonal and lamellar structures with comparative little curvature. They can also form ellipsoid or rod-like micelles even in very low concentrations instead of spheroid ones. The dynamic aggregation behavior of fluorinated surfactants, as well as the comparison with hydrogenated ones, was also investigated.     

Effects of Nonionic, Cationic, and Mixed Nonionic-Cationic Surfactants on the Acid-Base Behavior of Phenyl Salicylate

The effects of Brij 35 micelles, CTABr micelles, and mixed Brij 35–CTABr micelles on the acid–base behavior of phenyl salicylate (PST) have been studied in aqueous solution containing 2% v/v acetonitrile. The apparent pK_b (pK^app_b) of PST is decreased by 1.5 pK units with the increase in [Brij 35] from 0 to 0.02 M which is attributed to micellar medium effect. The values of pK^app_b remain almost independent of [CTABr] within its range 0.01–0.03 M. The increase in [CTABr] from 0 to 0.03 M in aqueous solution containing 0.02 M Brij 35 has not resulted in a change in pK^app_b. This shows that the characeristic structural features of nonionic Brij 35 micelles remain essentially unchanged on addition of CTABr under the present experimental conditions.     

Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizations

The overall objective of this investigation is to achieve high‐performance membranes with respect to flux and rejection characteristics, with an interplay of blending polymers having desired qualities. Thus, cellulose diacetate and polyethersulfone as candidate materials, in the presence of polyethylene glycol 600 as a pore forming agent, were blended in 100/0, 95/5, 90/10, 85/15, 80,20 and 75/25% compositions using N,N′‐dimethylformamide as solvent and membranes were prepared by the phase inversion technique. Polymer blend composition, additive concentration, and casting and gelation conditions were standardized for the preparation of asymmetric membranes with various pore statistics and morphology. These blend membranes were characterized for compaction in ultrafiltration experiments at 414 kPa pressure in order to attain steady state flux and is reached within 4–5 hr. The pure water flux was measured at 345 kPa pressure and is determined largely by the composition of polyethersulfone and additive concentration. The flux was found to reach the highest values of 66.5 and 275 1/(cm² hr) at 0 and 10 wt% additive concentrations respectively, at 25% SPS content of the blend. Membrane hydraulic resistance derived by measuring water flux at various transmembrane pressure and by using an algorithm was found to be inversely proportional to pure water flux. Water content is estimated by simple drying and weighing procedures and found proportional to pure water flux for all the membranes. The molecular weight cut‐offs (MWCOs) of different membranes were determined with proteins of different molecular weights and found to vary from 20–69 kDa (globular proteins) depending on the PEG and SPS content in the casting dope. Skin surface porosity of the membranes were analyzed by scanning the frozen membrane samples using scanning electron microscopy (SEM) at different magnifications. The surface porosity is in direct correlation to the MWCO derived from solute retention experiments. Copyright © 2004 John Wiley & Sons, Ltd.     

Effect of interacting nanoparticles on the ordered morphology of block copolymer/nanoparticle mixtures

We investigated the effect of hard additives, that is, magnetic nanoparticles (NPs) and metal NPs, on the ordered morphology of block copolymers by varying the NP concentration. To characterize the structural changes of a block copolymer associated with different NP loadings, small-angle X-ray scattering and transmission electron microscopy were performed. Monodisperse maghemite (γ-Fe₂O₃) NPs (7 nm in diameter) and silver (Ag) NPs (6 nm in diameter) with surfaces modified with oleic acids were synthesized, and a cylinder-forming poly(styrene-block-isoprene) diblock copolymer was used as a structure-directing matrix for the NPs. As the NP concentration increased, domains of NP aggregates were observed for both magnetic and metal NPs. In the case of mixtures of cylinder-forming poly(styrene-block-isoprene) and Ag NPs with weak particle–particle interactions, random aggregates of Ag NPs were observed, and the ordered morphology of the block copolymer lost its long-range order with an increase in the NP concentration. However, regular, latticelike aggregates obtained with γ-Fe₂O₃ NPs, because of the strong interparticle interactions, induced an intriguing morphological transformation from hexagonal cylinders to body-centered-cubic spheres via undulated cylinders, whereas the neat block copolymer did not show such a morphological transition over a wide range of temperatures. The interplay between magnetic NPs and the block copolymer was also tested with magnetic NPs of different sizes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3571–3579, 2006     

Swelling behavior of ionically cross-linked polyampholytic hydrogels in varied salt solutions

Ionically cross-linked polyampholytic hydrogels were synthesized by redox copolymerization of acrylamide and an ionic complex of (N,N-diethylamino)ethyl methacrylate and acrylic acid (designated as PADA hydrogel). The swelling behavior of the hydrogels in water indicated that a minimal equilibrium swelling ratio is found when the molar ratio of anionic/cationic monomers was 1.55. In NaCl solution, the hydrogels exhibited the typical swelling behavior of conventional polyampholytic gels. Their equilibrium swelling ratios increased with an increase in the NaCl concentration. In solutions of multivalent ions (CaCl₂ and trisodium citrate solutions), the equilibrium swelling ratios of the hydrogels increased first and were then followed by a decrease with an increase in salt concentration. Interestingly, an unexpected abrupt swelling phenomenon was observed when the fully swollen hydrogels in salt solution were transmitted to pure water. The unique swelling behavior of PADA hydrogels depends not only on the molar ratio of the anionic/cationic monomers but also on the valency of the ions.