衬底加热和电极修饰对提高有机场效应晶体管性能的影响

通过衬底加热和氧化钼(MoO3)修饰源漏极制备了并五苯有机场效应晶体管.研究了衬底温度和电极修饰层厚度对器件性能的影响.实验结果表明:当衬底温度为60℃、MoO3修饰层为10 nm时,器件性能获得了显著增强,场效应迁移率由原来的3.39×10-3 cm2/(V·s)提高到2.25 ×10-1 cm2/(V·s),阈值电压由12 V降低到3V.器件性能的改善归因于:衬底加热可以优化有源层形貌,改善载流子传输;而MoO3修饰层显著降低了电极与有源层之间的接触势垒,提高了载流子的注入.因此,衬底加热与电极修饰对于制备高性能有机场效应晶体管是不可或缺的优化手段.     

Elastic-plastic analyses on the residual stresses and curvature of the film/substrate bilayer system

During thermal cycling, the residual stresses are often generated in the film/substrate bilayer due to the material mismatch between the substrate and the film. If the thickness of the film is relatively high, the thermal residual stresses in it may be of different signs. When the film is subjected to elastic-plastic deformation, two plastic zones with different thicknesses may be generated in the film at a significantly high temperature difference. In this paper, a theoretical model which reflects the complete history of thermal residual stresses and curvatures in the elastoplastic film/substrate bilayer system is developed. Solutions are derived to estimate the residual stresses and curvature in the film as functions of temperature difference. The case of Al/Si system is used to illustrate the implementation of this model. Results show that the critical temperature difference at which the second plastic zone near the film surface is generated near the Al film surface is dependent on the film thickness. The strain hardening of the film has an obvious influence on the magnitude of residual stresses within the film at high temperature difference.     

A Method for Determining the Dielectric Constant of Microwave PCB Substrates

This paper presents a simple method for determining the dielectric constant of microwave PCB substrates. In the presented method, a bandpass microstrip filter designed on the PCB substrate with a user-predicted dielectric constant value is implemented for a given center frequency. The simulation results of the designed bandpass filter are obtained by the help of microwave design software; XFDTD?. Experimental results regarding the filter frequency characteristic are accomplished by means of a vector network analyzer. The simulation results of the designed filter are modified to overlap with the experimental ones by varying the dielectric constant value. When the simulation and experimental results are overlapped, the value of dielectric constant is accurately selected. In order to illustrate the validity of proposed method, the dielectric constant values of flame resistant-4 (FR4) substrates are acquired at IEEE 802.11b/g and IEEE 802.11a wireless local area network (WLAN) application frequencies. The results obtained by using the presented method agree with the previous studies in the literature.     

CdS films deposited by chemical bath under rotation

Cadmium sulfide (CdS) films were deposited on rotating substrates by the chemical bath technique. The effects of the rotation speed on the morphological, optical, and structural properties of the films were discussed. A rotating substrate-holder was fabricated such that substrates can be taken out from the bath during the deposition. CdS films were deposited at different deposition times (10, 20, 30, 40 and 50 min) onto Corning glass substrates at different rotation velocities (150, 300, 450, and 600 rpm) during chemical deposition. The chemical bath was composed by CdCl₂, KOH, NH₄NO₃ and CS(NH₂)₂ as chemical reagents and heated at 75 °C. The results show no critical effects on the band gap energy and the surface roughness of the CdS films when the rotation speed changes. However, a linear increase on the deposition rate with the rotation energy was observed, meanwhile the stoichiometry was strongly affected by the rotation speed, resulting a better 1:1 Cd/S ratio as speed increases. Rotation effects may be of interest in industrial production of CdTe/CdS solar cells.     

Pd/C-HCOONH4还原体系在苯佐卡因及类似物合成中的应用

以对硝基苯甲酸乙酯为原料,Pd/C为催化剂,甲酸铵为供氢体,乙醇为溶剂,对在室温下反应得到对氨基苯甲酸乙酯的催化转移氢化反应进行了研究.在相同的催化体系下,本佐卡因的类似物也得以高效合成.该催化转移氢化反应除温和的反应条件和高催化活性外,还兼具良好的放大前景.     

硅衬底GaN基LED薄膜芯片的应力调制

将Si衬底GaN基LED外延薄膜经晶圆键合、去硅衬底等工艺制作成垂直结构GaN基LED薄膜芯片,并对其进行不同温度的连续退火,通过高分辨X射线衍射(HRXRD)研究了连续退火过程中GaN薄膜芯片的应力变化。研究发现:垂直结构LED薄膜芯片在160~180℃下退火应力释放明显,200℃时应力释放充分,GaN的晶格常数接近标准值。继续升温应力不再发生明显变化,GaN薄膜的晶格常数只在标准晶格常数值附近波动。扫描电子显微镜给出的bonding层中Ag-In合金情况很好地解释了薄膜芯片应力的变化。     

金微/纳颗粒阵列的SERS效应研究

表面增强拉曼散射(surface-enhanced Raman scattering,简称为SERS)能够提供有机分子的指纹特征信息,且具有灵敏度高和响应时间快等优点,是一项具有发展前景的分析技术。纳米结构SERS基底是获得SERS信号的关键。本文利用简便的电沉积方法在硅片上制备大面积的金微/纳颗粒阵列。金纳米颗粒之间存在大量狭小的纳米间隙,在光激发下产生大量的SERS热点,从而具有很高的SERS灵敏度。而且,这种金微/纳结构具有高结构稳定性和化学稳定性。该结构对浓度低至10-12 M的罗丹明6G(R6G)具有很高的SERS灵敏性,且具有很好的SERS信号均匀性。利用这种微/纳结构阵列SERS基底,实现对水中低浓度农药甲基对硫磷的成功检测。这表明我们制备的金微/纳颗粒阵列在检测环境中的毒性有机物污染物方面具有潜在的应用前景。     

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

Two substrate integrated waveguide (SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38% (4.05 GHz-5.95 GHz) and AR bandwidth of 24.9% (4.4 GHz-5.65 GHz). The bandwidth of the high gain antenna can reach 42.7% (3.95 GHz-6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.     

图形衬底对多周期InGaAs量子点自组装生长的影响

量子点器件技术广泛应用于量子计算和光电器件上.成核位置的均匀性、有序性和尺寸一致性,可以有效提高光电器件性能.为了实现阵列量子点的可控性,本文采用湿法刻蚀制备图形化衬底,理论上解释了铟原子在图形化衬底上成核现象,产生有序的量子点分布特征,发现图形衬底的缺陷诱导在平台边缘和沟壑边缘成核,形成较大的量子点.在Stranski-Krastanow模式下图形衬底制备多周期量子点,发现多周期生长可以弱化台阶结构对量子点分布的限制作用.     

Biosensors based on gold nanoelectrode ensembles and screen printed electrodes

Gold nanowires were synthesized within polycarbonate membranes according to an electroless deposition method, obtaining nanoelectrode ensembles (NEEs) with special electrochemical features. NEEs were coupled with home-produced carbon graphite screen printed electrodes and the electrochemical properties of the original nanoelectrode ensemble on screen printed substrate (NEE/SPS) assembly has been tested for sensors application. Glucose oxidase has been used as model enzyme in order to verify the feasibility of disposable gold NEE/SPS biosensors. Finally, different immobilisation and electrochemical deposition techniques based on either self assembled monolayers of cysteamine (CYS) or amino-propyl-triethoxysilane (APTES) and conductive polyaniline (PANI) molecular wires were used. Spatial patterning of the enzyme on the polycarbonate surface and of PANI wires on gold nanoelectrodes was obtained. Possible direct electron transfer between the enzyme and the PANI modified gold nanoelectrodes has been evaluated.