Synthesis,crystal structure and docking studies of tetracyclic 10‐iodo‐1,2‐dihydroisoquinolino[2,1‐b][1,2,4]benzothiadiazine 12,12‐dioxide and its precursors

The title compound, 10‐iodo‐1,2‐dihydroisoquinolino[2,1‐b][1,2,4]benzothiadiazine 12,12‐dioxide, C₁₅H₁₁IN₂O₂S ( 8 ), was synthesized via the metal‐free intramolecular N‐iodosuccinimide (NIS)‐mediated radical oxidative sp³‐C—H aminative cyclization of 2‐(2′‐aminobenzenesulfonyl)‐1,3,4‐trihydroisoquinoline, C₁₅H₁₆N₂O₂S ( 7 ). The amino adduct 7 was prepared via a two‐step reaction, starting from the condensation of 2‐nitrobenzenesulfonyl chloride ( 4 ) with 1,2,3,4‐tetrahydroisoquinoline ( 5 ), to afford 2‐(2′‐nitrobenzenesulfonyl)‐1,3,4‐trihydroisoquinoline, C₁₅H₁₄N₂O₄S ( 6 ), in 82% yield. The catalytic hydrogenation of 6 with hydrogen gas, in the presence of 10% palladium‐on‐charcoal catalyst, furnished 7 . Products 6 – 8 were characterized by their melting points, IR and NMR (¹H and ¹³C) spectroscopy, and single‐crystal X‐ray diffraction. The three compounds crystallized in the monoclinic space group, with 7 exhibiting classical intramolecular hydrogen bonds of 2.16 and 2.26 Å. All three crystal structures exhibit centrosymmetric pairs of intermolecular C—H…π(ring) and/or π–π stacking interactions. The docking studies of molecules 6 , 7 and 8 with deoxyribonucleic acid (PDB id: 1ZEW ) revealed minor‐groove binding behaviours without intercalation, with 7 presenting the most favourable global energy of the three molecules. Nonetheless, molecule 8 interacted strongly with the DNA macromolecule, with an attractive van der Waals energy of ?15.53 kcal mol^?1.     

肾上腺素在对甲苯磺酸修饰电极上的电化学行为

研究了对甲苯磺酸在玻碳电极上电化学聚合的条件及修饰电极的电化学特性, 发现该聚合膜对肾上腺素的电氧化有显著的催化作用, 在pH 7.0的磷酸盐缓冲溶液中, 搅拌富集40 s后, 用循环伏安法对肾上腺素进行了测定, 线性范围: 4.05×10-7～9.45×10-6 mol/L, 检出限为3.2×10-8 mol/L. 对2.0×10-6 mol/L肾上腺素平行测定7次相对标准偏差为2.4%. 该电极有效地排除了抗坏血酸的干扰, 具有良好的稳定性和重现性.     

电磁感应在线消化-原子荧光光谱法测定茶水中的砷

利用电磁感应加热原理,研制了在线消化还原、氢化物发生原子荧光法分析装置,实现了茶水中As量的在线测定.对各种实验参数和干扰情况进行了研究.方法的检出限为0.063 μg/L;样品分析精密度(RSD)为2.5%(n=11).     

高温氧化-化学发光检测法测定水中总氮

采用高温氧化-化学发光检测法（high temperature oxidation ＆ chemiluminescence, HTO-CL）进行水质总氮（TN）的在线测定。总氮浓度（CN）与化学发光的强度（IN）呈良好的线性关系,线性区间为0．05～100mg／L。对真实水样采用本方法进行测定,其结果与国标方法相符,回收率在90％～110％之间。以本方法为工作原理的TN-2000型总氮测定仪可用于地表水质及污水的在线监测。     

碳纳米管结构对碳纳米管载Pt催化剂电催化性能的影响

在制备单、双壁及不同管径的多壁碳纳米管(CNTs)的基础上, 用液相还原法把Pt沉积到单、双壁和管径不同的多壁CNTs上. 发现制得的CNTs载Pt(Pt/CNTs)催化剂对甲醇氧化的电催化活性随CNTs管径减小而增加. 这归结于管径小的CNTs的比表面积较大, 含氧基团多, 有利于提高Pt粒子分散度, 加上管径小的单壁CNTs具有更高的导电性, 这些因素都有利于提高Pt/CNTs催化剂对甲醇氧化的电催化活性.     

催化动力学褪色光度法测定痕量铜(Ⅱ)的研究——过氧化氢-铜(Ⅱ)-亚甲基紫体系

研究了在盐酸介质中,铜(Ⅱ)催化过氧化氢氧化亚甲基紫褪色反应的适宜条件与影响因素,建立了催化动力学光度法测定痕量铜的新方法。方法的线性范围为0~25μg.L-1,检出限为1.98×10-9g.mL-1,相对标准偏差为1.18%,标准加入回收率为98.9%~102.7%。该法用于环境样中铜的测定,获满意结果。     

Stability and Removal of Benzophenone-Type UV Filters from Water Matrices by Advanced Oxidation Processes

Benzophenone (BP) type UV filters are common environmental contaminants that are posing a growing health concern due to their increasing presence in water. Different studies have evidenced the presence of benzophenones (BP, BP-1, BP-2, BP-3, BP-4, BP-9, HPB) in several environmental matrices, indicating that conventional technologies of water treatment are not able to remove them. It has also been reported that these compounds could be associated with endocrine-disrupting activities, genotoxicity, and reproductive toxicity. This review focuses on the degradation kinetics and mechanisms of benzophenone-type UV filters and their degradation products (DPs) under UV and solar irradiation and in UV-based advanced oxidation processes (AOPs) such as UV/H₂O₂, UV/persulfate, and the Fenton process. The effects of various operating parameters, such as UV irradiation including initial concentrations of H₂O₂, persulfate, and Fe²⁺, on the degradation of tested benzophenones from aqueous matrices, and conditions that allow higher degradation rates to be achieved are presented. Application of nanoparticles such as TiO₂, PbO/TiO₂, and Sb₂O₃/TiO₂ for the photocatalytic degradation of benzophenone-type UV filters was included in this review.     

锰卟啉/钒取代杂多酸配合物的合成、表征和性能研究

利用碘化四对(4-三甲氨基苯基)锰卟啉与钒取代杂多酸H5 PMo10 V2O40,在水溶液中,室温下反应合成了锰卟啉/钒取代杂多酸配合物,用红外和紫外光谱技术对其结构进行了表征,发现该配合物中包含着金属卟啉的环状结构与杂多酸的笼状结构,并且二者以化学键的形式键合在一起.以该化合物作为催化剂,以过氧化氢水溶液为氧化剂,在温和的条件下研究了锰卟啉/钒杂多酸配合物对苯的羟基化反应的影响,考察了催化剂的催化活性,探讨了催化剂对苯羟基化反应的活性中心.研究结果表明,杂多酸中的钒原子是其主要的催化活性中心,锰卟啉的存在可以有效地提高其催化活性.     

原位漫反射红外光谱表征钛硅分子筛TS-1催化苯乙烯氧化反应

采用高温漫反射红外光谱考察了钛硅分子筛TS-1的稳定性,发现960 cm-1吸收峰在673 K时没有变化,表明所表征的骨架钛具有一定的高温稳定性,而表征分子筛骨架振动的两个吸收峰在673 K下向低波数位移了约13 cm-1。探讨了H₂O₂吸附对TS-1分子筛骨架钛的影响,发现960 cm-1处的吸收峰在吸附H₂O₂后强度减弱,并且向高波数位移了11 cm-1;抽真空或加热,吸收峰又复原,表明骨架钛可能存在TiO结构,H₂O₂与分子筛中的TiO作用,使相应的960 cm-1吸收峰向高波数位移。原位漫反射红外光谱考察了TS-1催化苯乙烯氧化反应,谱图分析表明,苯甲醛是主要产物,TS-1催化氧化的关键是H₂O₂吸附在TS-1的骨架钛上形成活性中心。     

铁卟啉/钒取代杂多酸新型催化剂的合成、表征和性能研究

文章以水溶性碘化四对(4-三甲氨基苯基)铁卟啉和钒取代杂多酸H5PMo10V2O40为原料,采用离子交换方法在水溶液中合成了一种铁卟啉/钒取代杂多酸新型无机-有机复合催化剂,并使用红外和紫外光谱技术对其结构进行了表征,结果表明,这种新型复合催化剂仍然保持着卟啉的大环共轭结构和杂多酸的笼状多电子结构。同时研究了以30%过氧化氢水溶液为绿色氧化剂,初步探讨了这种铁卟啉杂多酸催化剂对苯的羟基化反应的的影响,考察了催化剂的催化活性。催化氧化实验表明,制备的铁卟啉/杂多酸配合物可用作苯直接氧化羟基化成苯酚的催化剂,并且表现出较高的催化活性。